`Download to` is where you want you want Deluge to download your media. If you want to move your files upon completion - check the box and enter a path for that option as well.
Pre-allocate disk space for the added torrents. This limits fragmentation and also makes sure if you use a cache drive or a feeder disk, that the space is available.
Do not set Pre-allocated disk space if you are using ZFS as your filesystem as ZFS [does not support fallocate](https://github.com/openzfs/zfs/issues/326){:target="_blank" rel="noopener noreferrer"}
- Bandwidth needed by other services in your home network.
!!! success ""
**Suggested:**`For a home connection that you use with others it's best practice to set the upload/download rate to about 70-80% of your maximum upload/download speed.`
## Global Bandwidth Limits
These are the client-wide settings, they will apply to the total traffic of all torrents.
I recommend using the seeding goals in your Starr Apps indexer settings (enable advanced) to remove completed downloads. These sections are then not necessary.
You've followed the [Setup TorGuard for port forwarding](/Misc/How-to-setup-Torguard-for-port-forwarding/){:target="_blank" rel="noopener noreferrer"} and want to know where in your download client you should add the port you've port forwarded.
Make sure you click `Test Active Port` and get a ✓ before moving on.
!!! success ""
**Suggested: `Critical`**
### Encryption
Encryption should be enabled on both `Incoming` and `Outgoing`. The default `Level` of `Either` will accept both encrypted and standard connections.
!!! success ""
**Suggested: `Level = Full Stream`**
### Network Extras
You can configure your network protocols in this section. Depending on which type of tracker you use, some of these will be beneficial while on other trackers (private) it will put you at risk of being banned/disabled.
!!! warning
Please read this section carefully.
1. UPnP and NAT-PMP should be both disabled in your router, as well as in Deluge, as they can pose security risks.
1. Public trackers can benefit from having settings like DHT (Distributed Hash Table) and Peer Exchange (PEX) enabled. These protocols rely on sources besides the trackers to get peers. **The following settings are recommended ONLY for public trackers.**
1. Decent private trackers will use the "private flag" and ignore these settings by default. However, it is strongly recommended that you use the following settings if you use private trackers. Almost all private trackers have rules stating that you must disable DHT, PEX, and LSD/LPD (Local Peer Discovery). Failing to do so puts your account at risk of being disabled.
Finally, you will want to enable some plugins. There are plenty of plugins on the Deluge community forums to browse once you are familiar with the client, but for the time being, we will only be covering the `WebUI` and `Label` plugins to get started.
If you are running a docker container, such as binhex's image, the `WebUI` plugin may not need to be enabled. Instead, it may be configured in the container.
Once you have enabled the `WebUI` plugin, it will appear in your `Preferences` menu list, and you will need to enable the web interface and set the port you want the WebUI to listen on.
!!! info
The default WebUI password is `deluge` and you can change that in preferences inside the WebUI once you access it through your browser.
The `Label` plugin will allow you to categorize/sort your torrents. You can assign one Label per torrent. Starr apps can also use Deluge's labels to help them keep track of downloads and imported torrents.
