1. For consistency with other torrents I recommend leaving this on `Original`.
!!! check ""
!!! success ""
**Suggested: `Original`**
1. Delete the .torrent file after it has been added to qBittorrent.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
1. Pre-allocated disk space for the added torrents, this limits fragmentation and also makes sure if you use a cache drive or a feeder disk that the space is available.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
!!! warning
@ -43,27 +43,27 @@
1. Make sure this is set to `Automatic`. Your downloads will not go into the category folder otherwise.
!!! check ""
!!! success ""
**Suggested: `Automatic`**
1. This helps you to manage your file location based on categories.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Same as `Step 2`
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Your download root path (Download folder/location).
!!! check ""
!!! success ""
**Read the `ATTENTION` block below**
1. If you enable this, your incomplete downloads will be placed in this directory until completed. This could be useful if you want your downloads to use a separate SSD/Feeder disk[^1], but this also results in extra unnecessary moves or in worse cases a slower and more I/O intensive copy + delete.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
#### ATTENTION
@ -81,22 +81,22 @@
1. Set this to TCP for the best performance
!!! check ""
!!! success ""
**Suggested: `TCP`**
1. Your port used for incoming connections, this is the port you opened in your router/firewall or port forwarded at your VPN provider to make sure you're connectable.
!!! check ""
!!! success ""
**Suggested: `The port you opened in your router/firewall or port forwarded at your VPN provider`**
1. This should be disabled in your router for several security reasons.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Make sure this is disabled so you don't mess up the forwarded port.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
### Connections Limits
@ -105,7 +105,7 @@
The best settings for this depends on many factors so I won't be covering this.
!!! check ""
!!! success ""
**Suggested: `personal preference based on your setup and connection.`**
### Proxy Server
@ -114,7 +114,7 @@ The best settings for this depends on many factors so I won't be covering this.
This is where you would add for example your SOCKS5 settings from your VPN provider.
!!! check ""
!!! success ""
**Suggested: `I personally don't recommend this unsecure option being it's un-encrypted and only spoofs your IP.`**
------
@ -133,7 +133,7 @@ The best settings depends on many factors.
- Your hardware used.
- Bandwidth needed by other services in your home network.
!!! check ""
!!! success ""
**Suggested: `For a home connection that you use with others it's best practice to set the upload/download rate to about 70-80% of your maximum upload/download speed.`**
### Alternative Rate Limits
@ -147,7 +147,7 @@ Examples:
- Limit your upload/download rate during daytime when you make most use of it, and unlimited it during nighttime when no one is using the connection.
- If you have an internet connection that's limited during specific hours (unlimited bandwidth during the night, but limited during the day)
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
### Rate Limits Settings
@ -158,17 +158,17 @@ Not going to cover the technical part of what it does, but the following setting
1. Prevents you from being flooded if the uTP protocol is used for any reason.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Apply rate limit to transport overhead
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Apply rate limit to peers on LAN
!!! check ""
!!! success ""
**Suggested: `Enabled`**
------
@ -181,17 +181,17 @@ Not going to cover the technical part of what it does, but the following setting
1. These settings are mainly used for public trackers (and should be enabled for them) and not for private trackers, decent private trackers use a private flag where they ignore these settings.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
1. Recommended setting `Allow encryption` rather than enforcing it allows more peers to connect and is recommended on underpowered systems as it will allow for lower overhead.
!!! check ""
!!! success ""
**Suggested: `Allow encryption`**
1. Anonymous mode hides clients (qBittorrent) fingerprint from the peer-ID, sets the ‘User-Agent’ to Null and it doesn’t share your IP-address directly with trackers (though peers will still see your IP address). If using private trackers, it's recommended to `disable` this. I also got reports from people who are using this that they had worse speeds.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
### Torrent Queueing
@ -200,7 +200,7 @@ Not going to cover the technical part of what it does, but the following setting
These options allow you to control the number of active torrents being downloaded and uploaded.
!!! check ""
!!! success ""
**Suggested: `personal preference based on your setup and connection.`**
### Seeding Limits
@ -209,17 +209,17 @@ These options allow you to control the number of active torrents being downloade
1. Your maximum seeding ratio preference. (When both ratio and seeding time are enabled it will trigger the action on whatever happens first.)
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Your maximum seeding time preference (When both ratio and seeding time are enabled it will trigger the action on whatever happens first.)
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. What to do when ratio or seeding time is reached.
!!! check ""
!!! success ""
**Suggested: `Paused and Disabled`**
!!! tip
@ -229,7 +229,7 @@ These options allow you to control the number of active torrents being downloade
!!! check ""
!!! success ""
**Recommendation: `Disabled`**
!!! WARNING
@ -253,7 +253,7 @@ These options allow you to control the number of active torrents being downloade
1. In some cases when this is enabled it could result in issues.
@ -37,7 +37,7 @@ You don't need to add the full path under `Save Path`, it will use the root down
## Downloads do not go into the category folder
!!! attention "Downloads do not go into the category folder"
!!! warning "Downloads do not go into the category folder"
When your downloads ends up in `/data/torrents/` and not in `/data/torrents/{tv|movies|music}` then you probably forgot to change `Default Torrent Management Mode:` to `Automatic`
@ -4,7 +4,7 @@ When you make use of the unRaid cache drive for your `/data/torrents` share and
Using the following instructions you will be able to move the files with the use of the qBittorrent API.
!!! summary "Workflow Rules - [CLICK TO EXPAND]"
!!! abstract "Workflow Rules - [CLICK TO EXPAND]"
1. Pause torrents older than last x days.
1. Run the mover.
@ -14,7 +14,7 @@ Using the following instructions you will be able to move the files with the use
!!! Danger "If you make use of the Seed Time/Ratio settings in your Indexers settings in the Starr apps[^1].<br> Make sure you're using `Post-Import Category` in your Starr apps Download clients settings.<br>Else it could happen when the torrents get paused that they get removed by the Starr apps before the seeding goal is reached."
!!! attention
!!! warning
The screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -133,7 +133,7 @@ qbt_pass = None
- `qbt_user` => Your used qBittorrent `User Name` if you have authentication enabled. Add `'` either side.
- `qbt_pass` => Your used qBittorrent `Password` if you have authentication enabled. Add `'` either side.
!!! attention ""
!!! warning ""
Depending on whether you use the unRaid `Mover Tuning` app, You might need to change **line 68**:
- If you do not use `Mover Tuning`, change **line 68** from `os.system('/usr/local/sbin/mover.old start')` to `os.system('/usr/local/sbin/mover start')`
make sure you delete/remove all your existing dockers from the Docker GUI and also remove your native installs (in Package Center) of these applications !!!
If you had previous installed apps, make a backup of their config folders.
@ -363,7 +363,7 @@ You will notice that all the images will be downloaded, after that the container
**Don't forget to look at the [Examples](/Hardlinks/Examples/) how to setup the paths inside your applications.**
!!! attention
!!! warning
If you need to do any changes, only edit the `docker-compose.yml` file. To activate the changes, run the command `sudo docker-compose up -d` again, from within the `/volume1/docker/appdata` folder.
@ -7,7 +7,7 @@ This is something that can't really be answered because it depends on the use ca
!!! danger ""
Here I will provide some suggestions and try to explain why I recommend these settings. Adjust it to your own liking and keep in mind that it is only a suggestion. I'm not a Plex Pro in anyway :bangbang:
!!! attention
!!! warning
Some settings are only visible for Plex Pass holders.
All changes need to be done on your Plex Media Server.
@ -53,7 +53,7 @@ The new agent settings are now managed “per library”.
When a change is detected in the source location for a library’s content, the appropriate library will be scanned. This function relies on the computer’s operating system providing the “something changed” trigger. Some operating systems don’t provide this trigger and content mounted via a network will also typically not work. If your library doesn’t automatically scan, you may have to set a periodical scan or do it manually.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
??? tip "TIP - Autoscan - [CLICK TO EXPAND]"
@ -70,7 +70,7 @@ When a change is detected in the source location for a library’s content, the
When changes to library folders are detected, only scan the folder which changed rather than scanning the entire content location. This works together with the normal Update my library automatically setting (and requires that setting to be enabled).
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Include music libraries in automatic updates
@ -85,7 +85,7 @@ I don't do music, so this choice is up to you, and I won't be covering it.
Turning this on will cause your Plex Media Server to run scans on your libraries using the designated interval.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Do you need a extra scan for your library to recognize new media?*
@ -96,7 +96,7 @@ Turning this on will cause your Plex Media Server to run scans on your libraries
With this option enabled, when an item’s file is deleted from the drive, it will be removed from the Plex library on the next scan. Disabling this option keeps the item in the library with an overlay over the item’s poster when the item is removed.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Allow media deletion
@ -105,7 +105,7 @@ With this option enabled, when an item’s file is deleted from the drive, it wi
The owner of the server will be allowed to delete media files from disk.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*In my opinion Plex shouldn't touch your media files. Use Sonarr/Radarr to manage your media library. (For extra security I've setup Plex with Read Only access to the media library)*
@ -116,7 +116,7 @@ The owner of the server will be allowed to delete media files from disk.
On low-powered systems (e.g. ARM-based NAS devices), it can be beneficial to run scanner tasks at a lower priority than other tasks. This can help ensure they do not interfere with regular streaming.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*Makes sure it uses less resources and ensure they do not interfere with regular streaming.*
@ -127,7 +127,7 @@ On low-powered systems (e.g. ARM-based NAS devices), it can be beneficial to run
This option creates a series of preview thumbnails from a media item when it is analyzed. These images are used by some Plex apps when you move back and forward in an app with the timeline scrubber. They’ll also be displayed in Now Playing when someone is streaming from you so that you can see where they are in the video.
!!! check ""
!!! success ""
**Suggested: `Never`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -147,7 +147,7 @@ This option creates a series of preview thumbnails from a media item when it is
You can choose to have TV episodes analyzed to try and detect when the “intro” occurs during playback. When detected, apps will then offer a `Skip Intro` button, allowing you to quickly jump over the intro.
!!! check ""
!!! success ""
**Suggested: `as a scheduled task`**
*or*
@ -160,7 +160,7 @@ You can choose to have TV episodes analyzed to try and detect when the “intro
Chapter thumbnails provide images in the chapter view on supported apps. They can take a little time to generate and consume very minor additional disk space.
!!! check ""
!!! success ""
**Suggested: `as a scheduled task`**
*or*
@ -177,7 +177,7 @@ Chapter thumbnails provide images in the chapter view on supported apps. They ca
Enable IPv6 support.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If you're not sure your network 100% works with ip6 <u>don't Enable it</u>.*
@ -188,7 +188,7 @@ Enable IPv6 support.
Choose how your Plex Media Server handles secure connections.
!!! check ""
!!! success ""
**Suggested: `Preferred`**
*Accept and prefer secure connections when they’re available for a Plex app, but allow regular HTTP connections if the app doesn’t support secure connections or if one can’t be established*
@ -199,10 +199,10 @@ Choose how your Plex Media Server handles secure connections.
For users with multiple network cards or systems such as NAS or Docker where there is always another network interface which Plex client applications may try to use to connect to the Plex Media Server, with this option you can ensure that your local Plex clients would only try that interface.
!!! attention
!!! warning
If you have enabled Remote Access enabled and are having Plex automatically map the port (as opposed to specifying a port manually), then Plex Media Server has no control over which network interface is used for an automatically-mapped port. Thus, it’s possible that Remote Access connections could come through an interface other than the one specified here.
!!! check ""
!!! success ""
**Suggested: `Whatever suits your setup`**
#### Strict TLS configuration
@ -211,7 +211,7 @@ For users with multiple network cards or systems such as NAS or Docker where the
If this setting is enabled, it prevents Plex Media Server from using or accepting the deprecated TLSv1.0 and v1.1 protocols, as well as legacy weak ciphers. May prevent older clients from connecting. The vast majority of users will have no reason to enable this option (and receive no benefit from doing so).
!!! check ""
!!! success ""
**Suggested: `Disabled`**
#### Enable local network discovery (GDM)
@ -220,7 +220,7 @@ If this setting is enabled, it prevents Plex Media Server from using or acceptin
Enable “G’Day Mate” discovery. This is used to allows Plex apps and servers to find each other automatically on a local network.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Remote streams allowed per user
@ -229,7 +229,7 @@ Enable “G’Day Mate” discovery. This is used to allows Plex apps and server
You can set the maximum number of simultaneous streams each remote user is allowed to have.
!!! check ""
!!! success ""
**Suggested: `Whatever suits your setup`**
#### LAN Networks
@ -238,7 +238,7 @@ You can set the maximum number of simultaneous streams each remote user is allow
It lets you specify which IP addresses or networks will be considered to be “local” to you.
!!! check ""
!!! success ""
**Suggested: `Your local IP/netmasks`**
*If your local devices are seen as remote devices, then this could solve your issue. (Do not include spaces or tabs.)*
@ -249,7 +249,7 @@ It lets you specify which IP addresses or networks will be considered to be “l
Allows incoming requests from this network’s WAN IP address to be treated as LAN requests in terms of bandwidth. This often occurs when DNS rebinding protection is in place and clients on the LAN cannot contact the server directly but instead have to go through the WAN IP address.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Enable Relay
@ -258,7 +258,7 @@ Allows incoming requests from this network’s WAN IP address to be treated as L
The Relay allows connections to the server through a proxy relay when the server is not accessible otherwise. Relay connections are bandwidth limited.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*I've seen several reports where people that had this Enabled had playback issues because it seems to be limited at 2 Mbps.*
@ -269,7 +269,7 @@ The Relay allows connections to the server through a proxy relay when the server
A comma-separated list of URLs (either HTTP or HTTPS), which will be published to plex.tv for server discovery. This can be very useful in a few cases: if you’re using a reverse proxy in front of the media server, or if your networking configuration is otherwise unique. For instance, if you have your own custom domain with subdomain.
@ -290,7 +290,7 @@ This feature can be enabled to allow your server to send events to external serv
This will influence the quality used when transcoding media.
!!! check ""
!!! success ""
**Suggested: `Automatic`**
*Most users should leave it set to Automatic. Hardware-Accelerated Streaming is not affected by this setting.*
@ -301,7 +301,7 @@ This will influence the quality used when transcoding media.
Directory to use when transcoding temporary files for streaming.
!!! check ""
!!! success ""
**Suggested: `Depending on your setup, if possible, your RAM (disk)`**
*Speeds up transcoding and less I/O, transcode data is temporary and doesn't need to be writing to a disk.*
@ -319,7 +319,7 @@ Directory to use when transcoding temporary files for streaming.
This feature allows Plex Media Server to maintain high visual fidelity of content, by applying tone mapping to convert it to SDR when transcoding HDR content.
!!! check ""
!!! success ""
**Suggested: `Depending on your setup`**
*Most HDR content will be in 4K resolution. If your platform has to use software transcoding to perform the tone mapping, then it may well struggle convert 4K content in real-time, unless you’re running on a very powerful system.*
@ -333,7 +333,7 @@ This feature allows Plex Media Server to maintain high visual fidelity of conten
To use Hardware-Accelerated Streaming in Plex Media Server.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Use hardware-accelerated video encoding
@ -342,7 +342,7 @@ To use Hardware-Accelerated Streaming in Plex Media Server.
To use Hardware-Accelerated Encoding in Plex Media Server.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
------
@ -376,7 +376,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. The new version of the Plex Movie agent/scanner
!!! check ""
!!! success ""
**Suggested: `Plex Movie`**
*Besides being much faster at scanning and getting metadata, one of the benefits of the new agent is that all agent settings are set at the library level, so that different libraries using the same agent can have different agent settings.*
@ -385,7 +385,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, use local posters and artwork if present. (Local subtitles files will be used whether this is enabled or not)
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*I had this enabled because I thought it was needed for local subtitles (.srt), but after research it seems it isn't needed.
@ -393,7 +393,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, prefer embedded tags and local files if present.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If enabled you could end up with weird movie naming you don't want, happens especially from releases from `RARBG`*
@ -402,7 +402,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. Automatically create collections when there are more than the selected number of items for an available collection.
!!! check ""
!!! success ""
**Suggested: `2`**
*Only show collections when you have more than one item in your library*
@ -414,7 +414,7 @@ Here you will find your libraries you've added to your Plex Media Server.
!!! danger "ATTENTION"
Creating these images can <u>take a considerable amount of time</u>, <u>CPU resources</u>, and <u>increase the storage space used</u>. The images are stored in your Plex database so <u>be careful you don’t fill the drive :bangbang:</u>
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -422,7 +422,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. This deletes the preview thumbnails it generated before you disabled this option
1. If you want to show your Collection in your library
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*When Disabled your movies will show up normally when you use library view, This doesn't mean it will disable the collection view.*
@ -433,7 +433,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. The new version of the Plex Movie agent/scanner
!!! check ""
!!! success ""
**Suggested: `Plex TV Series`**
*Besides being much faster at scanning and getting metadata, one of the benefits of the new agent is that all agent settings are set at the library level, so that different libraries using the same agent can have different agent settings.*
@ -444,7 +444,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. Use season titles when available.
1. When scanning this library, use local posters and artwork if present. (Local subtitles files will be used whether this is enabled or not)
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*I had this enabled because I thought it was needed for local subtitles (.srt), but after research it seems it isn't needed.
@ -454,7 +454,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, prefer embedded tags and local files if present.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If enabled you could end up with weird movie naming you don't want, happens especially from releases from `RARBG`*
@ -466,7 +466,7 @@ Here you will find your libraries you've added to your Plex Media Server.
!!! danger "ATTENTION"
Creating these images can <u>take a considerable amount of time</u>, <u>CPU resources</u>, and <u>increase the storage space used</u>. The images are stored in your Plex database so <u>be careful you don’t fill the drive :bangbang:</u>
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -474,14 +474,14 @@ Here you will find your libraries you've added to your Plex Media Server.
1. This deletes the preview thumbnails it generated before you disabled this option
1. If you want to show your Collection in your library
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*When Disabled your tv show will show up normally when you use library view, This doesn't mean it will disable the collection view.*
1. Generate intro detection for items in this library when enabled in server settings.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*Ever watch a TV show and it starts playing that same minute and a half credits intro that you've already watched multiple times? Well, you can have your Plex Media Server analyze the TV shows to try and detect those introductions and then let you skip through them with a single click!*
@ -30,7 +30,7 @@ After selecting the `Import` button you will get a screen that has all the Custo
!!! attention "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
!!! warning "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
@ -17,7 +17,7 @@ The Tokens not available in the release won't be used/shown.
This naming scheme is made to be compatible with the [New Plex Agent](https://forums.plex.tv/t/new-plex-media-server-movie-scanner-and-agent-preview/593269/517) that now supports IMDb and TMDb IDs in filenames, if you don't need it or want it just remove `{imdb-{ImdbId}}`
!!! caution "Starting from v4.2.2.6489, Radarr now supports Plex Multiple Edition tags in naming."
!!! warning "Starting from v4.2.2.6489, Radarr now supports Plex Multiple Edition tags in naming."
If you're using a lower version or don't need it replace:
@ -27,7 +27,7 @@ This naming scheme is made to be compatible with the [New Plex Agent](https://fo
@ -7,7 +7,7 @@ I'm going to show two different options on how you can setup your sync with two
- Option 1: This option is best used if you want a 1:1 copy of your Radarr/Sonarr instances as it'll sync everything
- Option 2: This option is best used if you only want to have a subset of your library Movies/TV Shows as 4K/2160p (UHD) as it filters by quality profile
!!! error ""
!!! bug ""
I'm not going to explain how to set up two Radarr/Sonarr instances for your system, being it depends on how you have it installed/running. [Radarr Multiple Instance Information](https://wiki.servarr.com/radarr/installation#multiple-instances) and [Sonarr Multiple Instance Information](https://wiki.servarr.com/sonarr/installation#multiple-instances)
## Preparation
@ -18,7 +18,7 @@ For this you need to have prepared the following:
- One download client (*Two if you prefer Usenet and Torrents*).
- Your download client has two separate categories (movies-hd, movies-uhd, tv-hd, tv-uhd, etc)
!!! attention
!!! warning
:bangbang:You can't use the same root (media library) folder for both Radarr's/Sonarr's:bangbang:
@ -78,7 +78,7 @@ Select your preferred download client.
The only thing you need to change/create is a separate `Category` that you're going to use for `Radarr 2`
!!! attention
!!! warning
This can't and shouldn't be the same category you use for `Radarr 1` but a separate `Category`.
@ -149,7 +149,7 @@ Select your preferred download client.
Only thing you need to change/create is a separate `Category` that you're going to use for `Sonarr 2`
!!! important
!!! tip
This can't and shouldn't be the same category you use for `Sonarr 1` but a separate `Category`.
@ -31,7 +31,7 @@ It is quite important that you follow and understand what is envisioned by Trash
The only change that is needed and **mandatory** for French Custom Formats to work is to set the preferred language profile for your releases to `Any`.
??? check "Screenshot example - [CLICK TO EXPAND]"
??? success "Screenshot example - [CLICK TO EXPAND]"
@ -27,7 +27,7 @@ Il est impératif que vous respectiez et compreniez ce qui est proposé par le g
La seule modification nécessaire et **indispensable** pour que les formats personnalisés français fonctionnent est de définir le profil de langue sur `Any`.
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
La raison pour laquelle le WEB-DL 720p n'est pas sélectionné est que vous ne trouverez pratiquement aucune release qui ne soit pas faite en 1080p WEB-DL.
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -199,13 +199,13 @@ Utilisez les paramètres suivants dans votre profil.
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
La raison pour laquelle le WEB-DL 720p n'est pas sélectionné est que vous ne trouverez pratiquement aucune release qui ne soit pas faite en 1080p WEB-DL.
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -65,7 +65,7 @@ At the bottom in your chosen profile you will see the added Custom Formats where
## Which Quality Profile should you choose
??? summary "Which Quality Profile should you choose - [CLICK TO EXPAND]"
??? abstract "Which Quality Profile should you choose - [CLICK TO EXPAND]"
<palign="center">*Click on the image below to see how to make use of the flowchart.*
@ -105,13 +105,13 @@ Use the following main settings in your profile.
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
The reason why I didn't select the WEB-DL 720p is because you will hardly find any releases that aren't done as 1080p WEB-DL.
- When the WEB-2160p is released it will download the WEB-2160p. (streaming services)
- When the REMUX-2160p is released it will upgrade to the REMUX-2160p.
@ -319,7 +319,7 @@ Use the following main settings in your profile.
### Custom Formats to avoid certain releases
??? FAQ "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
??? question "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
For Custom Formats you really want to avoid, set it to something really low like `-10000` and not something like `-10`.
Being when you add a Custom Format what you prefer and you set it to something like `+10` it could happen that for example the `BR-DISK` will be downloaded (-10)+(+10)=0 and if your `Minimum Custom Format Score` is set at `0`.
@ -332,7 +332,7 @@ This is a must have for every Quality Profile you use in my opinion. All these C
### Custom Formats with a score of 0
??? FAQ "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
??? question "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
All Custom Formats with a score of 0 are pure informational and don't do anything.
The Special Quality Profiles are Custom made and tested Quality Profile for specific needs or preferences.
!!! attention
!!! warning
- Anything here is for private use only and not for public use. :bangbang:
- I expect from the users that got the link to this page to honour it. :bangbang:
@ -24,13 +24,13 @@ The Special Quality Profiles are Custom made and tested Quality Profile for spec
**CF** = Custom Formats
??? FAQ "Why don't you add this to the public guide? - [CLICK TO EXPAND]"
??? question "Why don't you add this to the public guide? - [CLICK TO EXPAND]"
These SQPs are advanced Quality Profiles tested and created for a specific need, and only interesting for people that are interested in a specific Quality Profile.
??? FAQ "I see CFs that aren't in the main guide - [CLICK TO EXPAND]"
??? question "I see CFs that aren't in the main guide - [CLICK TO EXPAND]"
Some SQPs have/need specific CFs to work.
??? FAQ "Some CFs in your instructions have a score of 0. Should I follow the scores from the main guide? - [CLICK TO EXPAND]"
??? question "Some CFs in your instructions have a score of 0. Should I follow the scores from the main guide? - [CLICK TO EXPAND]"
No, you should always follow the scores of the SQP.
@ -207,7 +207,7 @@ If you would like it to be priority then set to **100**. If you do not want unce
The reason most of these are added is due to their shitty quality or just in general are not as good as other stuff that is out there. This can be tweaked as needed. Let me know if you run into any issues here. You should be able to just copy paste these in one go. If there is a reason something shouldn't be here let me know and your logic and I will be open to adjusting.
!!! important
!!! tip
If you would like `dub` releases then remove the last 2 lines and do not add them.
@ -250,7 +250,7 @@ Add this to your Preferred with a score of **[501]**
---
!!! important
!!! tip
These next few are optional, but they are here to move releases up over lower tiers of `1080/720p` or `WEB-DL/Blu-Ray`. Will add another note like this to end the optional section.
---
@ -288,7 +288,7 @@ Add this to your Preferred with a score of **[5]**
@ -5,7 +5,7 @@ With this option you can fine tune your preference.
The Release profile that we're going to use for this example is mainly to prefer P2P releases over Scene releases. (Scene releases are still being downloaded, but replaced once an upgrade is found.)
!!! error ""
!!! danger ""
**If you don't care about quality then stop reading and see if the other tutorials are helpful for you.**
??? question "FAQ - [CLICK TO EXPAND]"
@ -100,13 +100,13 @@ You will get a popup screen that will look like this:
------
!!! summary
!!! abstract
The Number between the **[**brackets**]** in the following release profiles are the scores the release name will get during an automatic and manual search and with the use of the scores some releases will be preferred over others and even upgraded.
The Number between **(**brackets**)** in the following release profiles are referring to the location where you should add this regex in the release profile corresponding the screenshot above.
!!! important
!!! tip
We're going to make use of four separate release profiles.
------
@ -203,7 +203,7 @@ Add this to your `Preferred (3)` with a score of [75]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -271,7 +271,7 @@ Add this to your `Preferred (3)` with a score of [10]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -303,7 +303,7 @@ Add this to your `Preferred (3)` with a score of [-100]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -331,7 +331,7 @@ Add this to your `Preferred (3)` with a score of [-100]
### Golden rule
!!! attention ""
!!! warning ""
:bangbang: This one is actually a must even that it's added in the optional section :bangbang:
??? question "Why the Must Not Contain entry - [CLICK TO EXPAND]"
@ -580,7 +580,7 @@ When you've done it correctly it will look something like this.
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -103,7 +103,7 @@ I also made 3 guides related to this one.
### TrueHD ATMOS
??? faq "TrueHD ATMOS - [CLICK TO EXPAND]"
??? question "TrueHD ATMOS - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Atmos){:target="_blank" rel="noopener noreferrer"}
@ -121,7 +121,7 @@ I also made 3 guides related to this one.
### DTS X
??? faq "DTS X - [CLICK TO EXPAND]"
??? question "DTS X - [CLICK TO EXPAND]"
DTS:X is an object-based audio codec, which aims to create a multi-dimensional sound that “moves around you like it would in real life”
@ -137,7 +137,7 @@ I also made 3 guides related to this one.
### ATMOS (undefined)
??? faq "ATMOS (undefined) - [CLICK TO EXPAND]"
??? question "ATMOS (undefined) - [CLICK TO EXPAND]"
Handles cases where only Atmos is specified in title but not DD+ or TrueHD (Where it is not specified if it is Lossy or Lossless)
@ -158,7 +158,7 @@ I also made 3 guides related to this one.
<sub>DDPlus = DD+</sub>
??? faq "DD+ ATMOS - [CLICK TO EXPAND]"
??? question "DD+ ATMOS - [CLICK TO EXPAND]"
Atmos via UHD Blu-ray will be lossless, or lossy via streaming services so in this case it will be lossy + Atmos
@ -174,7 +174,7 @@ I also made 3 guides related to this one.
### TrueHD
??? faq "TrueHD - [CLICK TO EXPAND]"
??? question "TrueHD - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_TrueHD){:target="_blank" rel="noopener noreferrer"}
@ -192,7 +192,7 @@ I also made 3 guides related to this one.
### DTS-HD MA
??? faq "DTS-HD MA - [CLICK TO EXPAND]"
??? question "DTS-HD MA - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/DTS-HD_Master_Audio){:target="_blank" rel="noopener noreferrer"}
@ -210,7 +210,7 @@ I also made 3 guides related to this one.
### FLAC
??? faq "FLAC - [CLICK TO EXPAND]"
??? question "FLAC - [CLICK TO EXPAND]"
FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless, meaning that audio is compressed in FLAC without any loss in quality. This is similar to how Zip works, except with FLAC you will get much better compression because it is designed specifically for audio
@ -226,7 +226,7 @@ I also made 3 guides related to this one.
### PCM
??? faq "PCM - [CLICK TO EXPAND]"
??? question "PCM - [CLICK TO EXPAND]"
PCM is the method of encoding typically used for uncompressed digital audio
@ -242,7 +242,7 @@ I also made 3 guides related to this one.
### DTS-HD HRA
??? faq "DTS-HD HRA - [CLICK TO EXPAND]"
??? question "DTS-HD HRA - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -259,7 +259,7 @@ I also made 3 guides related to this one.
<sub>Dolby Digital Plus = DD+ = DDPlus</sub>
??? faq "DD+ - [CLICK TO EXPAND]"
??? question "DD+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Digital_Plus){:target="_blank" rel="noopener noreferrer"}
@ -277,7 +277,7 @@ I also made 3 guides related to this one.
### DTS-ES
??? faq "DTS-ES - [CLICK TO EXPAND]"
??? question "DTS-ES - [CLICK TO EXPAND]"
DTS-ES (DTS Extended Surround) includes two variants, DTS-ES Discrete 6.1, and DTS-ES Matrix 5.1, depending on how the sound was originally mastered and stored.
@ -295,7 +295,7 @@ I also made 3 guides related to this one.
<sub>DTS = Basic DTS</sub>
??? faq "DTS - [CLICK TO EXPAND]"
??? question "DTS - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -310,7 +310,7 @@ I also made 3 guides related to this one.
### AAC
??? faq "AAC - [CLICK TO EXPAND]"
??? question "AAC - [CLICK TO EXPAND]"
Advanced Audio Coding
@ -331,7 +331,7 @@ I also made 3 guides related to this one.
<sub>(Basic) Dolby Digital = DD</sub>
??? faq "DD - [CLICK TO EXPAND]"
??? question "DD - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Digital){:target="_blank" rel="noopener noreferrer"}
@ -349,7 +349,7 @@ I also made 3 guides related to this one.
### MP3
??? faq "MP3 - [CLICK TO EXPAND]"
??? question "MP3 - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -364,7 +364,7 @@ I also made 3 guides related to this one.
### Opus
??? faq "Opus - [CLICK TO EXPAND]"
??? question "Opus - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Opus_(audio_format)){:target="_blank" rel="noopener noreferrer"}
@ -488,7 +488,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV HDR10 - [CLICK TO EXPAND]"
??? question "DV HDR10 - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -508,7 +508,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV - [CLICK TO EXPAND]"
??? question "DV - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -528,7 +528,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV HLG - [CLICK TO EXPAND]"
??? question "DV HLG - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -548,7 +548,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV SDR - [CLICK TO EXPAND]"
??? question "DV SDR - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -568,7 +568,7 @@ I also made 3 guides related to this one.
<sub>HDR10Plus = HDR10+</sub>
??? faq "HDR10+ - [CLICK TO EXPAND]"
??? question "HDR10+ - [CLICK TO EXPAND]"
**HDR10+ enhances upon a pre-existing HDR10 base layer allowing backwards compatibility with HDR10 devices. It adds dynamic metadata for the devices that support it.**
@ -590,7 +590,7 @@ I also made 3 guides related to this one.
<sub>HDR10</sub>
??? faq "HDR10 - [CLICK TO EXPAND]"
??? question "HDR10 - [CLICK TO EXPAND]"
**HDR10 is the most basic HDR format used in consumer media and is supported by all HDR-supported devices. It adds static metadata upon the PQ10 format.**
@ -614,7 +614,7 @@ I also made 3 guides related to this one.
<sub>HDR</sub>
??? faq "HDR - [CLICK TO EXPAND]"
??? question "HDR - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.m.wikipedia.org/wiki/High-dynamic-range_video){:target="_blank" rel="noopener noreferrer"}
@ -632,7 +632,7 @@ I also made 3 guides related to this one.
### HDR (undefined)
??? faq "HDR (undefined) - [CLICK TO EXPAND]"
??? question "HDR (undefined) - [CLICK TO EXPAND]"
Some groups don't add HDR to their 4K release name so I suggest to add this Custom Format at the same score as you add one of your HDR Custom Formats.
@ -652,7 +652,7 @@ I also made 3 guides related to this one.
<sub>PQ = PQ10</sub>
??? faq "PQ - [CLICK TO EXPAND]"
??? question "PQ - [CLICK TO EXPAND]"
**PQ10 is the most basic HDR format which all other common formats are based upon. It is the barebones SMPTE 2084 specification and has no metadata.**
@ -674,7 +674,7 @@ I also made 3 guides related to this one.
<sub>HLG = HLG10</sub>
??? faq "HLG - [CLICK TO EXPAND]"
??? question "HLG - [CLICK TO EXPAND]"
**HLG does not use dynamic metadata and is backwards compatible with SDR devices. It is mostly used in broadcasting.**
@ -698,7 +698,7 @@ I also made 3 guides related to this one.
### Hybrid
??? faq "Hybrid - [CLICK TO EXPAND]"
??? question "Hybrid - [CLICK TO EXPAND]"
A hybrid release means any combination of sources (video + audio) and not a direct encode of a single source. Generally you can be sure that any hybrid that has been put together is the best quality release of a particular title.
@ -714,7 +714,7 @@ I also made 3 guides related to this one.
### Remaster
??? faq "Remaster - [CLICK TO EXPAND]"
??? question "Remaster - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Remaster){:target="_blank" rel="noopener noreferrer"}
@ -737,7 +737,7 @@ I also made 3 guides related to this one.
### BR-DISK
??? faq "BR-DISK - [CLICK TO EXPAND]"
??? question "BR-DISK - [CLICK TO EXPAND]"
This is a custom format to help Sonarr recognize & ignore BR-DISK (ISO's and Blu-ray folder structure) in addition to the standard BR-DISK quality.
@ -767,7 +767,7 @@ I also made 3 guides related to this one.
<sub>Low Quality Releases = LQ</sub>
??? faq "LQ - [CLICK TO EXPAND]"
??? question "LQ - [CLICK TO EXPAND]"
A collection of known Low Quality groups that are often banned from the the top trackers because their lack of quality.
@ -785,13 +785,13 @@ I also made 3 guides related to this one.
<sub>720/1080p no x265 = x265 (720/1080p) = x265 (HD)</sub>
??? faq "x265 (HD) - [CLICK TO EXPAND]"
??? question "x265 (HD) - [CLICK TO EXPAND]"
This blocks/ignores 720/1080p(HD) releases that are encoded in x265
In your quality profile use the following score for this Custom Format: `{{ sonarr['cf']['x265-hd']['trash_score'] }}`
!!! fail ""
!!! failure ""
--8<--"includes/docker/x265.md"
!!! Danger "Don't use this together with [{{ sonarr['cf']['x265-no-hdrdv']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#x265-no-hdrdv), Only ever include one of them :warning:"
@ -848,7 +848,7 @@ I also made 3 guides related to this one.
### x264
??? faq "x264 - [CLICK TO EXPAND]"
??? question "x264 - [CLICK TO EXPAND]"
x264 is a *free software library* and *application* for encoding video streams into the [H.264/MPEG-4 AVC](https://en.wikipedia.org/wiki/H.264){:target="_blank" rel="noopener noreferrer"} compression format, and is released under the terms of the [GNU GPL](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html){:target="_blank" rel="noopener noreferrer"}.
@ -866,11 +866,11 @@ I also made 3 guides related to this one.
### x265
??? faq "x265 - [CLICK TO EXPAND]"
??? question "x265 - [CLICK TO EXPAND]"
x265 is a *free software library* and *application* for encoding video streams into the [H.265/MPEG-H HEVC](http://en.wikipedia.org/wiki/H.265){:target="_blank" rel="noopener noreferrer"} compression format, and is released under the terms of the [GNU GPL](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html){:target="_blank" rel="noopener noreferrer"}.
!!! fail ""
!!! failure ""
Please don't forget to read the following [Microsized & Wrong Source](#microsized-wrong-source)
??? example "JSON - [CLICK TO EXPAND]"
@ -913,7 +913,7 @@ I also made 3 guides related to this one.
### Bad Dual Groups
??? faq "Bad dual groups - [CLICK TO EXPAND]"
??? question "Bad dual groups - [CLICK TO EXPAND]"
These groups take the original release, then they add their own preferred language (ex. Portuguese) as the main audio track (AAC 2.0), What results after renaming and FFprobe that the media file will be recognized as Portuguese AAC audio. It's a common rule that you add the best audio as first.
Also they often even rename the release name in to Portuguese.
@ -931,7 +931,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV (WEBDL) - [CLICK TO EXPAND]"
??? question "DV (WEBDL) - [CLICK TO EXPAND]"
This is a special Custom Format that block WEBDLs **with** Dolby Vision but **without** HDR10 fallback.
You will need to add the following to your new Custom Format when created in your Quality Profile (`Setting` => `Profiles`) and then set the score to `-1000` or even `-10000`
@ -954,7 +954,7 @@ I also made 3 guides related to this one.
### HDR10Plus Boost
??? faq "HDR10+ Boost - [CLICK TO EXPAND]"
??? question "HDR10+ Boost - [CLICK TO EXPAND]"
Optional (use this one only if you have a (Samsung) TV that supports HDR10+ and you don't have a Setup that supports DV or you prefer HDR10+.
@ -970,7 +970,7 @@ I also made 3 guides related to this one.
### No-RlsGroup
??? faq "No-RlsGroup - [CLICK TO EXPAND]"
??? question "No-RlsGroup - [CLICK TO EXPAND]"
Some indexers strip out the release group which could result in LQ groups getting a higher score.
For example a lot of EVO releases end up stripping the group name, so they appear as "upgrades", and they end up getting a decent score if other things match
@ -991,7 +991,7 @@ I also made 3 guides related to this one.
### Obfuscated
??? faq "Obfuscated - [CLICK TO EXPAND]"
??? question "Obfuscated - [CLICK TO EXPAND]"
Optional (use these only if you dislike renamed releases)
@ -1007,7 +1007,7 @@ I also made 3 guides related to this one.
### Retags
??? faq "Retags - [CLICK TO EXPAND]"
??? question "Retags - [CLICK TO EXPAND]"
Optional (use these only if you dislike retagged releases)
@ -1023,7 +1023,7 @@ I also made 3 guides related to this one.
### Scene
??? faq "Scene - [CLICK TO EXPAND]"
??? question "Scene - [CLICK TO EXPAND]"
This Custom Format will try to recognize so called Scene releases, depending on your preferences you can give it a negative score `-10000` or a positive score or just don't add it all.
@ -1039,7 +1039,7 @@ I also made 3 guides related to this one.
### Season Pack
??? faq "Season Pack - [CLICK TO EXPAND]"
??? question "Season Pack - [CLICK TO EXPAND]"
This Custom Format can be used depending if you prefer or not prefer a season pack
@ -1064,7 +1064,7 @@ I also made 3 guides related to this one.
### x265 (no HDR/DV)
??? faq "x265 (no HDR/DV) - [CLICK TO EXPAND]"
??? question "x265 (no HDR/DV) - [CLICK TO EXPAND]"
This blocks/ignores 720/1080p (HD) releases that are encoded in x265.
@ -1088,7 +1088,7 @@ I also made 3 guides related to this one.
### AV1
??? faq "AV1 - [CLICK TO EXPAND]"
??? question "AV1 - [CLICK TO EXPAND]"
- This is a new codec and you need modern devices that support it.
- We also had reports of playback/transcoding issues.
@ -1107,7 +1107,7 @@ I also made 3 guides related to this one.
### SDR
??? faq "SDR - [CLICK TO EXPAND]"
??? question "SDR - [CLICK TO EXPAND]"
- This will help to prevent to grab UHD/4k releases without HDR Formats.
@ -1123,7 +1123,7 @@ I also made 3 guides related to this one.
### DV FEL
??? faq "DV (FEL) - [CLICK TO EXPAND]"
??? question "DV (FEL) - [CLICK TO EXPAND]"
- This will boost the score for Dolby Vision Releases using the original full quality Dolby Vision layer from the disc release to replace the old WEBDL HYBRID release.
@ -1143,7 +1143,7 @@ I also made 3 guides related to this one.
### Remux Tier 01
??? faq "Remux Tier 01 - [CLICK TO EXPAND]"
??? question "Remux Tier 01 - [CLICK TO EXPAND]"
- Groups doing remuxes with multiple sources(discs) mixing what's best.
@ -1159,7 +1159,7 @@ I also made 3 guides related to this one.
### Remux Tier 02
??? faq "Remux Tier 02 - [CLICK TO EXPAND]"
??? question "Remux Tier 02 - [CLICK TO EXPAND]"
- Groups that only use one source.(So called one disc wonders.)
- Groups that use an automated way.
@ -1177,7 +1177,7 @@ I also made 3 guides related to this one.
### HD Bluray Tier 01
??? faq "HD Bluray Tier 01 - [CLICK TO EXPAND]"
??? question "HD Bluray Tier 01 - [CLICK TO EXPAND]"
- Groups that created encodes from the remuxes without micro-sizing them.
@ -1193,7 +1193,7 @@ I also made 3 guides related to this one.
### HD Bluray Tier 02
??? faq "HD Bluray Tier 02 - [CLICK TO EXPAND]"
??? question "HD Bluray Tier 02 - [CLICK TO EXPAND]"
- Groups that created encodes from the remuxes without micro-sizing them.
@ -1207,7 +1207,7 @@ I also made 3 guides related to this one.
### WEB Tier 01
??? faq "WEB Tier 01 - [CLICK TO EXPAND]"
??? question "WEB Tier 01 - [CLICK TO EXPAND]"
- Groups that are on a certain list and active
- Groups that are on a certain list and did a minimum of x releases
@ -1226,7 +1226,7 @@ I also made 3 guides related to this one.
### WEB Tier 02
??? faq "WEB Tier 02 - [CLICK TO EXPAND]"
??? question "WEB Tier 02 - [CLICK TO EXPAND]"
- Groups that are on a certain list and are less or not active anymore
- Groups that only did a few releases
@ -1244,7 +1244,7 @@ I also made 3 guides related to this one.
### WEB Tier 03
??? faq "WEB Tier 03 - [CLICK TO EXPAND]"
??? question "WEB Tier 03 - [CLICK TO EXPAND]"
- Groups that are on a certain list and are less or not active anymore
- Groups that hardly done any releases
@ -1262,7 +1262,7 @@ I also made 3 guides related to this one.
### WEB Scene
??? faq "WEB Scene - [CLICK TO EXPAND]"
??? question "WEB Scene - [CLICK TO EXPAND]"
One of the few scene groups that released quality releases.
@ -1284,7 +1284,7 @@ I also made 3 guides related to this one.
<sub>Amazon</sub>
??? faq "Amazon - [CLICK TO EXPAND]"
??? question "Amazon - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Amazon_Prime_Video){:target="_blank" rel="noopener noreferrer"}
@ -1302,7 +1302,7 @@ I also made 3 guides related to this one.
<sub>Apple TV+</sub>
??? faq "Apple TV+ - [CLICK TO EXPAND]"
??? question "Apple TV+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Apple_TV%2B){:target="_blank" rel="noopener noreferrer"}
@ -1320,7 +1320,7 @@ I also made 3 guides related to this one.
<sub>DC Universe</sub>
??? faq "DC Universe - [CLICK TO EXPAND]"
??? question "DC Universe - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/DC_Universe_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1338,7 +1338,7 @@ I also made 3 guides related to this one.
<sub>Disney+</sub>
??? faq "Disney+ - [CLICK TO EXPAND]"
??? question "Disney+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Disney%2B){:target="_blank" rel="noopener noreferrer"}
@ -1356,7 +1356,7 @@ I also made 3 guides related to this one.
<sub>HBO Max</sub>
??? faq "HBO Max - [CLICK TO EXPAND]"
??? question "HBO Max - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/HBO_Max){:target="_blank" rel="noopener noreferrer"}
@ -1374,7 +1374,7 @@ I also made 3 guides related to this one.
<sub>HBO</sub>
??? faq "HBO - [CLICK TO EXPAND]"
??? question "HBO - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/HBO){:target="_blank" rel="noopener noreferrer"}
@ -1392,7 +1392,7 @@ I also made 3 guides related to this one.
<sub>Hulu</sub>
??? faq "Hulu - [CLICK TO EXPAND]"
??? question "Hulu - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Hulu){:target="_blank" rel="noopener noreferrer"}
@ -1410,7 +1410,7 @@ I also made 3 guides related to this one.
<sub>NLZiet</sub>
??? faq "NLZiet - [CLICK TO EXPAND]"
??? question "NLZiet - [CLICK TO EXPAND]"
NLZIET is the online service of Dutch broadcasters that provides non-stop tv, commercial-free. The streaming service brings the best of all channels straight to your preferred device and lets you see your favorite tv content in high quality on all available platforms; anytime and anywhere.
@ -1428,7 +1428,7 @@ I also made 3 guides related to this one.
<sub>Netflix</sub>
??? faq "Netflix - [CLICK TO EXPAND]"
??? question "Netflix - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Netflix){:target="_blank" rel="noopener noreferrer"}
@ -1446,7 +1446,7 @@ I also made 3 guides related to this one.
<sub>Paramount+</sub>
??? faq "Paramount+ - [CLICK TO EXPAND]"
??? question "Paramount+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Paramount%2B){:target="_blank" rel="noopener noreferrer"}
@ -1464,7 +1464,7 @@ I also made 3 guides related to this one.
<sub>Peacock TV</sub>
??? faq "Peacock TV - [CLICK TO EXPAND]"
??? question "Peacock TV - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Peacock_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1482,7 +1482,7 @@ I also made 3 guides related to this one.
<sub>Quibi</sub>
??? faq "Quibi - [CLICK TO EXPAND]"
??? question "Quibi - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Quibi){:target="_blank" rel="noopener noreferrer"}
@ -1500,7 +1500,7 @@ I also made 3 guides related to this one.
<sub>SHOWTIME</sub>
??? faq "SHOWTIME - [CLICK TO EXPAND]"
??? question "SHOWTIME - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Showtime_(TV_network)){:target="_blank" rel="noopener noreferrer"}
@ -1518,7 +1518,7 @@ I also made 3 guides related to this one.
<sub>Videoland</sub>
??? faq "Videoland - [CLICK TO EXPAND]"
??? question "Videoland - [CLICK TO EXPAND]"
Videoland is a Dutch OTT online service provider owned by RTL Nederland. Originally it was a retail chain of video rental stores. Its main competitor is Netflix.
@ -1536,7 +1536,7 @@ I also made 3 guides related to this one.
<sub>RED = Youtube Red = Youtube Premium</sub>
??? faq "Youtube Red - [CLICK TO EXPAND]"
??? question "Youtube Red - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/YouTube_Premium){:target="_blank" rel="noopener noreferrer"}
@ -1554,7 +1554,7 @@ I also made 3 guides related to this one.
<sub>iT = iTunes</sub>
??? faq "iTunes - [CLICK TO EXPAND]"
??? question "iTunes - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/ITunes){:target="_blank" rel="noopener noreferrer"}
@ -1572,7 +1572,7 @@ I also made 3 guides related to this one.
<sub>CANAL = CANAL+/MyCANAL</sub>
??? faq "Canal+ - [CLICK TO EXPAND]"
??? question "Canal+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Canal%2B){:target="_blank" rel="noopener noreferrer"}
@ -1590,7 +1590,7 @@ I also made 3 guides related to this one.
<sub>SALTO = SⱯLTO</sub>
??? faq "SⱯLTO - [CLICK TO EXPAND]"
??? question "SⱯLTO - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Salto_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1608,7 +1608,7 @@ I also made 3 guides related to this one.
<sub>RTBF = Radio-télévision belge de la Communauté française (Radio Télévision Belge Francophone)</sub>
??? faq "RTBF - [CLICK TO EXPAND]"
??? question "RTBF - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/RTBF){:target="_blank" rel="noopener noreferrer"}
@ -1628,7 +1628,7 @@ I also made 3 guides related to this one.
@ -1748,7 +1748,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 01 (Muxers)
??? faq "Anime Web Tier 01 (Muxers) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 01 (Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1763,7 +1763,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 02 (Top FanSubs)
??? faq "Anime Web Tier 02 (Top FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 02 (Top FanSubs) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1778,7 +1778,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 03 (Official Subs)
??? faq "Anime Web Tier 03 (Official Subs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 03 (Official Subs) - [CLICK TO EXPAND]"
Official sub groups that tend to be more consistent and release fast
??? example "JSON - [CLICK TO EXPAND]"
@ -1793,7 +1793,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 04 (Official Subs)
??? faq "Anime Web Tier 04 (Official Subs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 04 (Official Subs) - [CLICK TO EXPAND]"
Official sub groups
??? example "JSON - [CLICK TO EXPAND]"
@ -1808,7 +1808,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 05 (FanSubs)
??? faq "Anime Web Tier 05 (FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 05 (FanSubs) - [CLICK TO EXPAND]"
FanSub groups that are consistent
??? example "JSON - [CLICK TO EXPAND]"
@ -1823,7 +1823,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 06 (FanSubs)
??? faq "Anime Web Tier 06 (FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 06 (FanSubs) - [CLICK TO EXPAND]"
FanSub groups that are consistent
??? example "JSON - [CLICK TO EXPAND]"
@ -1838,7 +1838,7 @@ I also made 3 guides related to this one.
### Anime Raws
??? faq "Anime Raws - [CLICK TO EXPAND]"
??? question "Anime Raws - [CLICK TO EXPAND]"
A collection of know groups that release raws
??? example "JSON - [CLICK TO EXPAND]"
@ -1853,7 +1853,7 @@ I also made 3 guides related to this one.
### Anime LQ Groups
??? faq "Anime LQ Groups - [CLICK TO EXPAND]"
??? question "Anime LQ Groups - [CLICK TO EXPAND]"
A collection of known Low Quality groups.
??? example "JSON - [CLICK TO EXPAND]"
@ -1868,7 +1868,7 @@ I also made 3 guides related to this one.
### Uncensored
??? faq "Uncensored - [CLICK TO EXPAND]"
??? question "Uncensored - [CLICK TO EXPAND]"
This CF covers releases that are uncensored
??? example "JSON - [CLICK TO EXPAND]"
@ -1883,7 +1883,7 @@ I also made 3 guides related to this one.
### v0
??? faq "v0 - [CLICK TO EXPAND]"
??? question "v0 - [CLICK TO EXPAND]"
CF to cover releases named with v0 which we don't want
??? example "JSON - [CLICK TO EXPAND]"
@ -1898,7 +1898,7 @@ I also made 3 guides related to this one.
### v1
??? faq "v1 - [CLICK TO EXPAND]"
??? question "v1 - [CLICK TO EXPAND]"
CF to cover v1 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1913,7 +1913,7 @@ I also made 3 guides related to this one.
### v2
??? faq "v2 - [CLICK TO EXPAND]"
??? question "v2 - [CLICK TO EXPAND]"
CF to cover v2 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1928,7 +1928,7 @@ I also made 3 guides related to this one.
### v3
??? faq "v3 - [CLICK TO EXPAND]"
??? question "v3 - [CLICK TO EXPAND]"
CF to cover v3 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1943,7 +1943,7 @@ I also made 3 guides related to this one.
### v4
??? faq "v4 - [CLICK TO EXPAND]"
??? question "v4 - [CLICK TO EXPAND]"
CF to cover v4 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1958,7 +1958,7 @@ I also made 3 guides related to this one.
### VRV
??? faq "VRV - [CLICK TO EXPAND]"
??? question "VRV - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://www.wikiwand.com/en/VRV_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
??? example "JSON - [CLICK TO EXPAND]"
@ -1973,7 +1973,7 @@ I also made 3 guides related to this one.
### 10bit
??? faq "10bit - [CLICK TO EXPAND]"
??? question "10bit - [CLICK TO EXPAND]"
This CF covers releases that are 10bit
??? example "JSON - [CLICK TO EXPAND]"
@ -1988,7 +1988,7 @@ I also made 3 guides related to this one.
### Anime Dual Audio
??? faq "Anime Dual Audio - [CLICK TO EXPAND]"
??? question "Anime Dual Audio - [CLICK TO EXPAND]"
This CF covers releases that have Dual Audio
??? example "JSON - [CLICK TO EXPAND]"
@ -2003,7 +2003,7 @@ I also made 3 guides related to this one.
### Dubs Only
??? faq "Dubs Only - [CLICK TO EXPAND]"
??? question "Dubs Only - [CLICK TO EXPAND]"
This CF covers releases that only have Dubs
??? example "JSON - [CLICK TO EXPAND]"
@ -2022,7 +2022,7 @@ I also made 3 guides related to this one.
### Multi-French
??? faq "Multi-French - [CLICK TO EXPAND]"
??? question "Multi-French - [CLICK TO EXPAND]"
Recognize movies that include the original and the french audio. Work only after import as it need the result from FFprobe to get which audio are present. Will rename the release to keep the recognition of 'Multi' by the [Multi-Audio](#multi-audio) custom format.
@ -2038,7 +2038,7 @@ I also made 3 guides related to this one.
### Multi-Audio
??? faq "Multi-Audio - [CLICK TO EXPAND]"
??? question "Multi-Audio - [CLICK TO EXPAND]"
A slightly modified [Multi](#multi) Custom Formats that recognize VF and VO inside the name.
@ -2054,7 +2054,7 @@ I also made 3 guides related to this one.
### French Audio
??? faq "French Audio - [CLICK TO EXPAND]"
??? question "French Audio - [CLICK TO EXPAND]"
This will recognize every kind of French Audio.
@ -2070,7 +2070,7 @@ I also made 3 guides related to this one.
### VFF
??? faq "VFF - [CLICK TO EXPAND]"
??? question "VFF - [CLICK TO EXPAND]"
Full French version (dubbing done in France) and French version (normally equivalent to VFQ).
@ -2086,7 +2086,7 @@ I also made 3 guides related to this one.
### VOF
??? faq "VOF - [CLICK TO EXPAND]"
??? question "VOF - [CLICK TO EXPAND]"
Original French Version.
@ -2102,7 +2102,7 @@ I also made 3 guides related to this one.
### VFI
??? faq "VFI - [CLICK TO EXPAND]"
??? question "VFI - [CLICK TO EXPAND]"
International French Version. VF[1-9] or FR[1-9] indicates the number of dubs present (normally VF2 being VFF and VFQ) and is considered as an International French release.
@ -2118,7 +2118,7 @@ I also made 3 guides related to this one.
### VFQ
??? faq "VFQ - [CLICK TO EXPAND]"
??? question "VFQ - [CLICK TO EXPAND]"
Canadian French Version.
@ -2134,7 +2134,7 @@ I also made 3 guides related to this one.
### VQ
??? faq "VQ - [CLICK TO EXPAND]"
??? question "VQ - [CLICK TO EXPAND]"
Quebec Version (strong Quebec accent, ex: The Simpsons movie).
@ -2150,7 +2150,7 @@ I also made 3 guides related to this one.
### VFB
??? faq "VFB - [CLICK TO EXPAND]"
??? question "VFB - [CLICK TO EXPAND]"
Belgian French Version.
@ -2166,7 +2166,7 @@ I also made 3 guides related to this one.
### VOSTFR
??? faq "VOSTFR - [CLICK TO EXPAND]"
??? question "VOSTFR - [CLICK TO EXPAND]"
Indicates soundtrack in the original language, with French subtitles. It should be noted that SUBFRENCH is included inside this Custom Format. However, SUB often mean that the subtitle was embedded inside the picture (hardcoded). French releases tend to mix both, leading some VOSTFR being labelled as SUBFRENCH and SUBFRENCH as VOSTFR.
@ -2182,7 +2182,7 @@ I also made 3 guides related to this one.
### FanSUB
??? faq "FanSUB - [CLICK TO EXPAND]"
??? question "FanSUB - [CLICK TO EXPAND]"
Action of subtitling a video for personal and non-professional purposes. The quality of FanSUBs can vary enormously (accuracy of translation, mistakes, etc.) and could lead to so called FastSUBs.
@ -2198,7 +2198,7 @@ I also made 3 guides related to this one.
### FastSUB
??? faq "FastSUB - [CLICK TO EXPAND]"
??? question "FastSUB - [CLICK TO EXPAND]"
FanSUB, but made as quickly as possible, at the expense of quality.
@ -2218,7 +2218,7 @@ I also made 3 guides related to this one.
### FR Remux Tier 01
??? faq "Remux Tier 01 - [CLICK TO EXPAND]"
??? question "Remux Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups doing remuxes with multiple sources (discs) mixing what's best.
@ -2236,7 +2236,7 @@ I also made 3 guides related to this one.
### FR HD Bluray Tier 01
??? faq "FR HD Bluray Tier 01 - [CLICK TO EXPAND]"
??? question "FR HD Bluray Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that created encodes from the remuxes without micro-sizing them.
@ -2254,7 +2254,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 01
??? faq "FR WEB Tier 01 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that source directly from the streaming service.
@ -2271,7 +2271,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 02
??? faq "FR WEB Tier 02 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 02 - [CLICK TO EXPAND]"
- WIP
- Groups that source directly from the streaming service but are not so active.
@ -2289,7 +2289,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 03
??? faq "FR WEB Tier 03 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 03 - [CLICK TO EXPAND]"
- WIP
- Groups that haven't released much or are not well recognized. (yet)
@ -2307,7 +2307,7 @@ I also made 3 guides related to this one.
### FR Anime Tier 01
??? faq "FR Anime Tier 01 - [CLICK TO EXPAND]"
??? question "FR Anime Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that are know to be still active and doing only Anime.
@ -2324,7 +2324,7 @@ I also made 3 guides related to this one.
### FR Anime Tier 02
??? faq "FR Anime Tier 02 - [CLICK TO EXPAND]"
??? question "FR Anime Tier 02 - [CLICK TO EXPAND]"
- WIP
- Groups that are know to be still active and doing Anime and other type of release.
@ -2343,7 +2343,7 @@ I also made 3 guides related to this one.
### FR Anime FanSub
??? faq "FR Anime FanSub - [CLICK TO EXPAND]"
??? question "FR Anime FanSub - [CLICK TO EXPAND]"
Known good groups that are doing only FanSub.
@ -2359,7 +2359,7 @@ I also made 3 guides related to this one.
### FR Scene Groups
??? faq "FR Scene Groups - [CLICK TO EXPAND]"
??? question "FR Scene Groups - [CLICK TO EXPAND]"
Known French Scene groups.
@ -2377,7 +2377,7 @@ I also made 3 guides related to this one.
<sub>French Low Quality Releases = FR LQ</sub>
??? faq "FR LQ - [CLICK TO EXPAND]"
??? question "FR LQ - [CLICK TO EXPAND]"
A collection of known French Low Quality groups that are often banned from the the top trackers because their lack of quality.
@ -30,7 +30,7 @@ After selecting the `Import` button you will get a screen that has all the Custo
!!! attention "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
!!! warning "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -151,7 +151,7 @@ Utilisez les paramètres principaux suivants dans votre profil.
La raison pour laquelle le WEB 1080p est fusionné avec le 2160p est que certaines sorties NF ne seront pas publiées en 4k, mais possède tout de même du DV/HDR.
Si vous voulez faire la même chose, veillez à remplacer [x265 (HD)](/Sonarr/sonarr-collection-of-custom-formats/#x265-hd){:target="_blank" rel="noopener noreferrer"} par [x265 (no HDR/DV)](/Sonarr/sonarr-collection-of-custom-formats/#x265-no-hdrdv){:target="_blank" rel="noopener noreferrer"}.
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -64,7 +64,7 @@ At the bottom in your chosen profile you will see the added Custom Formats where
## Which Quality Profile should you choose
??? summary "Which Quality Profile should you choose - [CLICK TO EXPAND]"
??? abstract "Which Quality Profile should you choose - [CLICK TO EXPAND]"
- The downloaded media will be upgraded to any of the added Custom Formats until a score of 10000.
@ -190,13 +190,13 @@ Use the following main settings in your profile.
### Why only WEB-DL
??? faq "Why do you only have a release profile for WEB-DL - [CLICK TO EXPAND]"
??? question "Why do you only have a release profile for WEB-DL - [CLICK TO EXPAND]"
I only do WEB-DL my self for TV shows because in my opinion WEB-DL is the sweet spot between quality and size and you often don't see big differences anyway for TV shows. (Except for shows like GOT, Vikings, etc)
### Why prefer P2P groups
??? faq "Why do you prefer P2P groups over scene groups - [CLICK TO EXPAND]"
??? question "Why do you prefer P2P groups over scene groups - [CLICK TO EXPAND]"
Scene groups always release in a rush to bring it out as fast as possible.
@ -206,7 +206,7 @@ Use the following main settings in your profile.
### Why so many repacks/propers
??? faq "Why do I see so many repacks/propers of Amazon WEB-DLs lately - [CLICK TO EXPAND]"
??? question "Why do I see so many repacks/propers of Amazon WEB-DLs lately - [CLICK TO EXPAND]"
A large portion of Amazon WEB-DLs in the last week have only had 192Kbps DD+5.1, because that's all Amazon made available initially. The proper 640Kbps DD+5.1 audio might appear a few hours later or a few months, but when they get updated, the episodes will be REPACKED.
@ -224,7 +224,7 @@ Use the following main settings in your profile.
### Custom Formats to avoid certain releases
??? FAQ "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
??? question "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
For Custom Formats you really want to avoid, set it to something really low like `-10000` and not something like `-10`.
Being when you add a Custom Format what you prefer and you set it to something like `+10` it could happen that for example the `BR-DISK` will be downloaded (-10)+(+10)=0 and if your `Minimum Custom Format Score` is set at `0`.
@ -237,7 +237,7 @@ This is a must have for every Quality Profile you use in my opinion. All these C
### Custom Formats with a score of 0
??? FAQ "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
??? question "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
All Custom Formats with a score of 0 are pure informational and don't do anything.
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}
??? summary "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
{ data-title="Follow the flowchart, continue till you hit finished." data-description="- The yellow boxes match the Quality Profile on the right side of the Guide.<br>- If the Guide says <b>ALL</b> it means <b>ALL</b>. (<u>Even if you have a TV/Hardware Media Player that can't handle for example DV or HDR10+</u>, else you will limit yourself what you're able to get or get download loops, this also counts for the audio formats).<br><br><b>All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.</b>" }
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}
All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.
From experience most of the time when people change scores or leave out certain CF that work together they end up with undesired results.
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}
??? summary "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
{ data-title="Follow the flowchart, continue till you hit finished." data-description="- The yellow boxes match the Quality Profile on the right side of the Guide.<br>- If the Guide says <b>ALL</b> it means <b>ALL</b>. (<u>Even if you have a TV/Hardware Media Player that can't handle for example DV or HDR10+</u>, else you will limit yourself what you're able to get or get download loops, this also counts for the audio formats).<br><br><b>All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.</b>" }
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Some Indexers in Prowlarr can rename `MULTi` releases to `MULTi.TRUEFRENCH` or `MULTi.FRENCH`. I do not recommend using such a feature along with those Custom Formats as it can lead to false positives from the VFF or VFQ Custom Formats.
??? summary "French Audio Versions - [CLICK TO EXPAND]"
??? abstract "French Audio Versions - [CLICK TO EXPAND]"
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Certains indexeurs dans Prowlarr peuvent renommer les versions `MULTi` en `MULTi.TRUEFRENCH` ou `MULTi.FRENCH`. Je ne recommande pas l'utilisation d'une telle fonction car elle peut entraîner des faux positifs avec les formats personnalisés VFF ou VFQ.
??? summary "Versions françaises - [CLIQUEZ POUR AFFICHER]"
??? abstract "Versions françaises - [CLIQUEZ POUR AFFICHER]"
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Some Indexers in Prowlarr can rename `MULTi` releases to `MULTi.TRUEFRENCH` or `MULTi.FRENCH`. I do not recommend using such a feature along with those Custom Formats as it can lead to false positives from the VFF or VFQ Custom Formats.
??? summary "French Audio Versions - [CLICK TO EXPAND]"
??? abstract "French Audio Versions - [CLICK TO EXPAND]"
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Certains indexeurs dans Prowlarr peuvent renommer les versions `MULTi` en `MULTi.TRUEFRENCH` ou `MULTi.FRENCH`. Je ne recommande pas l'utilisation d'une telle fonction car elle peut entraîner des faux positifs avec les formats personnalisés VFF ou VFQ.
??? summary "Versions françaises - [CLIQUEZ POUR AFFICHER]"
??? abstract "Versions françaises - [CLIQUEZ POUR AFFICHER]"
The default path setup suggested by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal and it makes them look like two or three file systems, even if they aren’t (*Because of how Docker’s volumes work*). It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move, resulting in a slower and more I/O intensive copy + delete is used.
??? hint "docker-compose commands - [CLICK TO EXPAND]"
??? tip "docker-compose commands - [CLICK TO EXPAND]"
- `sudo docker-compose up -d` (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)
- `sudo docker-compose pull` (Pulls an image associated with a service defined in a docker-compose.yml)
??? summary "Radarr current logic - [CLICK TO EXPAND]"
??? abstract "Radarr current logic - [CLICK TO EXPAND]"
As of 2021-11-06 the logic is as follows:
@ -17,7 +17,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/radarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use the [Repack/Proper Custom Format](/Radarr/Radarr-collection-of-custom-formats/#repackproper){:target="_blank" rel="noopener noreferrer"}
??? summary "Sonarr current logic - [CLICK TO EXPAND]"
??? abstract "Sonarr current logic - [CLICK TO EXPAND]"
As of 2021-11-06 the logic is as follows:
@ -19,7 +19,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/sonarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use a preferred word regex of `/\b(repack|proper)\b/i`
??? summary "Sonarr v4 current logic - [CLICK TO EXPAND]"
??? abstract "Sonarr v4 current logic - [CLICK TO EXPAND]"
As of v4 release the logic is as follows:
@ -18,7 +18,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/sonarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use a preferred word regex of `/\b(repack|proper)\b/i`
!!! danger "The CF with `0` you can choose to add with a score of `0` or just don't add them.<br>The reason why we score them this low is to prevent transcoding as much as possible<br>The reason why `DTS` has a score of `0` is to make sure you don't limit your self to much."
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
Some files were not shown because too many files have changed in this diff
Show More
TRaSH
2 years ago