This basic example is based on the use of docker images
!!! note ""
Keep in mind I've setup my paths so it works with hardlinks and you get instant moves.
!!! attention ""
The default path setup recommended by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move.
But you're able to change this, by not using the pre-defined/recommended paths like:
This basic example is based on the use of docker images
!!! tip ""
Keep in mind the path are setup so it works with hardlinks and instant moves.
More info [HERE](/Hardlinks/Hardlinks-and-Instant-Moves/){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
The default path setup recommended by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move.
But you're able to change this, by not using the pre-defined/recommended paths like:
This basic example is based on the use of docker images
!!! tip ""
Keep in mind the path are setup so it works with hardlinks and instant moves.
More info [HERE](/Hardlinks/Hardlinks-and-Instant-Moves/){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
The default path setup recommended by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move.
But you're able to change this, by not using the pre-defined/recommended paths like:
This basic example is based on the use of docker images
!!! tip ""
Keep in mind the path are setup so it works with hardlinks and instant moves.
More info [HERE](/Hardlinks/Hardlinks-and-Instant-Moves/){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
The default path setup recommended by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move.
But you're able to change this, by not using the pre-defined/recommended paths like:
This basic example is based on the use of docker images
!!! note ""
Keep in mind I've setup my paths so it works with hardlinks and you get instant moves.
!!! attention ""
The default path setup recommended by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move.
But you're able to change this, by not using the pre-defined/recommended paths like:
For example `/<path_to_data>/data`, or even `/data`.
## Folder Structure
!!! attention
It doesn't really matter which path you use for your media and appdata,
the only thing you should avoid is `/home`.
Because user folders in `/home` are expected to have some restrictive permissions.
It just could end up creating a permissions mess, so it's better to just avoid entirely.
For this example we're going to make use of a share called `data`.
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
*In this examples I'm using lower case on all folder on purpose, being Linux is case sensitive.*
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
### Breakdown of the Folder Structure
!!! info
The paths you use on the inside matter. Because of how Docker’s volumes work, passing in two or three volumes such as the commonly suggested `/tv`, `/movies` and `/downloads` makes them look like two or three file systems, even if they aren’t. This means hard links won’t work and instead of an instant move, a slower and more I/O intensive copy + delete is used.
#### Torrent clients
qBittorrent, Deluge, ruTorrent
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
#### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
#### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
**Don't forget to look at the [Examples](/Hardlinks/Examples/) how to setup the paths inside your applications.**
It doesn't really matter which path you use for your media,
the only thing you should avoid is `/home`.
Because user folders in `/home` are expected to have some restrictive permissions.
It just could end up creating a permissions mess, so it's better to just avoid entirely.
For this example we're going to make use of a share called `data`.
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
*I'm using lower case on all folder on purpose, being Linux is case sensitive.*
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
## Breakdown of the Folder Structure
### Torrent clients
qBittorrent, Deluge, ruTorrent
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
### Usenet clients
NZBGet or SABnzbd
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
------
## Permissions
Recursively chown user and group and Recursively chmod to 775/664
```bash
sudo chown -R $USER:$USER /data
sudo chmod -R a=,a+rX,u+w,g+w /data
```
**Don't forget to look at the [Examples](/Hardlinks/How-to-setup-for/) how to setup the paths inside the applications.**
The paths you use on the inside matter. Because of how Docker’s volumes work, passing in two or three volumes such as the commonly suggested `/tv`, `/movies` and `/downloads` makes them look like two or three file systems, even if they aren’t. This means hard links won’t work and instead of an instant move, a slower and more I/O intensive copy + delete is used.
### Torrent clients
qBittorrent, Deluge, ruTorrent
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
### Usenet clients
NZBGet or SABnzbd
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
make sure you deleted/removed all your existing dockers from the GUI and also remove your native installs of these applications !!!
@ -266,9 +198,4 @@ You will notice that all the images will be downloaded, and after that the conta
Just don't use the GUI !!!
??? hint "docker-compose commands - [CLICK TO EXPAND]"
- `sudo docker-compose up -d` (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)
- `sudo docker-compose pull` (Pulls an image associated with a service defined in a docker-compose.yml)
- `sudo docker-compose down` (The Docker-compose down command also stops Docker containers like the stop command does. But it goes the extra mile. Docker-compose down, doesn’t just stop the containers, it also removes them.)
- `sudo docker system prune -a --volumes --force` (Remove all unused containers, networks, images (both dangling and unreferenced), and optionally, volumes.)
@ -14,8 +14,8 @@ Here you will find Guides mainly for Sonarr/Radarr/Bazarr and everything related
## How this all started
When I started using Sonarr/Radarr, I noticed that it didn't grab the releases that I actually wanted, as I'm a bit picky about which releases and what quality I prefer.
So I decided to fine tune it to try to get the releases & quality I preferred. On discord I also noticed that others run in to the same issue so I explained them how I managed to get it solved. Being I had to explain it often I decided to write it down and make it public so I could easily link it to someone when they needed it.
After a while I also decided to create guides for often asked questions on discord, and started to collect all kind of information gathered from different sources.
So I decided to fine tune it to try to get the releases & quality I preferred. On Discord, I also noticed that others run in to the same issue so I explained them how I managed to get it solved. Being that I had to explain it often, I decided to write it down and make it public so I could easily link it to someone when they needed it.
After a while I also decided to create guides for frequently asked questions, and started to collect all kind of information gathered from various sources.
The guides I make I try to make them as easy as possible for everyone to understand, in my opinion pictures explain often more then just some text.
This basic example is based on the use of docker images
!!! tip ""
Keep in mind the path are setup so it works with hardlinks and instant moves.
More info [HERE](/Hardlinks/Hardlinks-and-Instant-Moves/){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
The default path setup suggested by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal because it makes them look like two or three file systems, even if they aren’t. It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move, resulting in a slower and more I/O intensive copy + delete is used.
But you're able to change this, by not using the pre-defined/recommended paths like:
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
#### Usenet clients
NZBGet or SABnzbd
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
#### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
#### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
------
**Don't forget to look at the [Examples](/Hardlinks/Examples/) how to setup the paths inside the applications.**
??? hint "docker-compose commands - [CLICK TO EXPAND]"
- `sudo docker-compose up -d` (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)
- `sudo docker-compose pull` (Pulls an image associated with a service defined in a docker-compose.yml)
- `sudo docker-compose down` (The Docker-compose down command also stops Docker containers like the stop command does. But it goes the extra mile. Docker-compose down, doesn’t just stop the containers, it also removes them.)
- `sudo docker system prune -a --volumes --force` (Remove all unused containers, networks, images (both dangling and unreferenced), and optionally, volumes.)
It doesn't really matter which path you use for your media and appdata,
the only thing you should avoid is `/home`.
Because user folders in `/home` are expected to have some restrictive permissions.
It just could end up creating a permissions mess, so it's better to just avoid entirely.
For this example we're going to make use of a share called `data`.
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
*In this examples I'm using lower case on all folder on purpose, being Linux is case sensitive.*
TRaSH
3 years ago
committed by
GitHub