Sonarr - [CLICK TO EXPAND]
+Sonarr - [Click to show/hide]
Settings => Download Clients
Make sure you check both boxes under Completed Download Handling at step 3.
Settings => Download Clients
Make sure you check both boxes under Completed Download Handling at step 3.
Settings => Download Clients
Make sure you check both boxes under Completed Download Handling at step 3,
When you make use of the unRaid cache drive for your /data/torrents share and the torrents in qBittorent are still seeding then the mover can't move files, because they are still in use.
Using the following instructions you will be able to move the files with the use of the qBittorrent API.
Workflow Rules - [CLICK TO EXPAND]
+Workflow Rules - [Click to show/hide]
After setup it's fully automated and will check every X minutes for updates to the Custom Formats or Sonarr Release Profile and will update it to your Radarr or Sonarr (Multiple Client Support).
Just enable the Custom Formats/Release Profiles you want.
Radarr Custom Formats Table
Radarr Custom Formats (Multiple Instances possible) @@ -2567,7 +2567,7 @@ Last update: - February 26, 2023 18:00:58 + July 26, 2023 16:06:01 diff --git a/Hardlinks/Examples/index.html b/Hardlinks/Examples/index.html index 856ab9c2f..d532b283a 100644 --- a/Hardlinks/Examples/index.html +++ b/Hardlinks/Examples/index.html @@ -2490,7 +2490,7 @@
Settings => Media Management => Importing
Settings => Media Management => Root Folders
Settings => Media Management => Importing
Settings => Media Management => Root Folders
SABnzbd config => Folders
SABnzbd config => Categories
Settings => PATHS
Settings => CATEGORIES
Options => Downloads
Preferences => Downloads
../config/rtorrent/config/rtorrent.rc (path to your appdata)
Settings => Downloads
A real move and not a copy file from download folder to media folder and then delete file from download folder.
Starr Apps? - [CLICK TO EXPAND]Starr Apps? - [Click to show/hide]Sonarr, Radarr, Lidarr, etc.
/config) will be stored on the host in the /docker/appdata/{appname}
version: "3.2"
services:
radarr:
@@ -2792,7 +2792,7 @@ sudo chmod -R
Docker-Compose Commands
-docker-compose commands - [CLICK TO EXPAND]
+docker-compose commands - [Click to show/hide]
sudo docker-compose up -d (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)sudo docker-compose pull (Pulls an image associated with a service defined in a docker-compose.yml)/mnt/ with the
- ruTorrent
-Sonarr Examples - [CLICK TO EXPAND]
+Sonarr Examples - [Click to show/hide]
Sonarr
Settings => Media Management => Importing
@@ -2638,7 +2638,7 @@ In this example the mounted drive will be mounted to /mnt/ with the
-Radarr Examples - [CLICK TO EXPAND]
+Radarr Examples - [Click to show/hide]
Radarr
Settings => Media Management => Importing
@@ -2649,7 +2649,7 @@ In this example the mounted drive will be mounted to /mnt/ with the
-SABnzbd Examples - [CLICK TO EXPAND]
+SABnzbd Examples - [Click to show/hide]
SABnzbd
SABnzbd config => Folders
@@ -2657,7 +2657,7 @@ In this example the mounted drive will be mounted to /mnt/ with the
-NZBGet Examples - [CLICK TO EXPAND]
+NZBGet Examples - [Click to show/hide]
NZBGet
Settings => PATHS
@@ -2665,19 +2665,19 @@ In this example the mounted drive will be mounted to /mnt/ with the
-qBittorrent Examples - [CLICK TO EXPAND]
+qBittorrent Examples - [Click to show/hide]
qBittorrent
Options => Downloads
-Deluge Example - [CLICK TO EXPAND]
+Deluge Example - [Click to show/hide]
Deluge
Preferences => Downloads
-ruTorrent Examples - [CLICK TO EXPAND]
+ruTorrent Examples - [Click to show/hide]
ruTorrent
../config/rtorrent/config/rtorrent.rc (path to your appdata)
@@ -2702,7 +2702,7 @@ In this example the mounted drive will be mounted to /mnt/ with the
Last update:
- April 15, 2023 10:24:13
+ July 26, 2023 16:06:01
diff --git a/Hardlinks/How-to-setup-for/Synology/index.html b/Hardlinks/How-to-setup-for/Synology/index.html
index 31ea0970d..d913f32c1 100644
--- a/Hardlinks/How-to-setup-for/Synology/index.html
+++ b/Hardlinks/How-to-setup-for/Synology/index.html
@@ -2923,7 +2923,7 @@
This page will provide you with guidance on how to install several Docker images to your Synology system. We highly recommend to read the full guide, that way you have a better understanding of what you do, in case you later decide to make changes.
Automated Script
-Automated script (
Use this script at your own risk) - [CLICK TO EXPAND]
+Automated script (Use this script at your own risk) - [Click to show/hide]
Warning
Though, we offer a short way out. This is intended as a quick way to do everything that is written on this page within one script. And is only for initial setup. After that, you need to manage it yourself. Rerunning the script will reset all personal changes made in the compose/env.
@@ -3154,7 +3154,7 @@ We're going to do this in Putty or a similar program.
Whats included and Whats not included
-What's included and What's not included - [CLICK TO EXPAND]
+What's included and What's not included - [Click to show/hide]
This docker-compose file will have the following docker containers included.
- Radarr
@@ -3247,7 +3247,7 @@ If you had previous installed apps, make a backup of their config folders.
Docker-Compose Commands
-docker-compose commands - [CLICK TO EXPAND]
+docker-compose commands - [Click to show/hide]
sudo docker-compose up -d (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)sudo docker-compose pull (Pulls an image associated with a service defined in a docker-compose.yml)Due to some iptables configuration in DSM, you can get an incorrect IP reported in Plex or other apps that need an read/report the IP. To fix this, you need to add two rules to your iptables. unfortunately, those rules can sometimes be deleted at reboot or after DSM update.
To fix this, you will need to add a Scheduled Task that executes at boot with root user, which will check if the rules exists, if not, re-add them.
-Task bash command - [CLICK TO EXPAND]
+Task bash command - [Click to show/hide]
#!/bin/bash
currentAttempt=0
totalAttempts=10
@@ -3312,7 +3312,7 @@ If you had previous installed apps, make a backup of their config folders.
Last update:
- July 6, 2023 20:29:52
+ July 26, 2023 16:06:01
diff --git a/Misc/How-to-setup-Torguard-for-port-forwarding/index.html b/Misc/How-to-setup-Torguard-for-port-forwarding/index.html
index 2800ef3a9..1bc81c182 100644
--- a/Misc/How-to-setup-Torguard-for-port-forwarding/index.html
+++ b/Misc/How-to-setup-Torguard-for-port-forwarding/index.html
@@ -2671,7 +2671,7 @@
Login to your Client area
Login to your Client Area.
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
Create a user account
@@ -2679,13 +2679,13 @@
This account will be used for authentication with your VPN Torrent client.
Services > My Services > Manage > Manage Credentials
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
Create a new username and choose a secure password or create a random username and password.
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
@@ -2693,7 +2693,7 @@ This account will be used for authentication with your VPN Torrent client.
Now it's time to get the IP of your VPN server you're going to use from the Global VPN Network, From your Client Area.
Servers > Global VPN Network
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
Global VPN Network
@@ -2715,7 +2715,7 @@ This account will be used for authentication with your VPN Torrent client.
You will then get the IP of the server.
Remember that for later use.
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
@@ -2729,7 +2729,7 @@ Remember that for later use.
Then click on Manage and select Port Forward Request.
Services > My Services > Manage > Port Forward Request
-Example - [CLICK TO EXPAND]
+Example - [Click to show/hide]
VPN Tunnel Type
@@ -2758,7 +2758,7 @@ Remember that for later use.
WireGuard Request Port Forward
-WireGuard Request Port Forward - [CLICK TO EXPAND]
+WireGuard Request Port Forward - [Click to show/hide]
- That's the
IP we found earlier.
@@ -2791,14 +2791,14 @@ Remember that for later use.
From your Client Area go to your Config Generator.
Tools > Config Generator
-Example Select Tools > Config Generator - [CLICK TO EXPAND]
+Example Select Tools > Config Generator - [Click to show/hide]
Config Generator
Choose your preferred VPN Tunnel type.
OVPN Config Generator
-OVPN Config Generator - [CLICK TO EXPAND]
+OVPN Config Generator - [Click to show/hide]
- Keep this on
Default.
@@ -2816,7 +2816,7 @@ Remember that for later use.
WireGuard Config Generator
-WireGuard Config Generator - [CLICK TO EXPAND]
+WireGuard Config Generator - [Click to show/hide]
- Choose
WireGuard.
@@ -2847,7 +2847,7 @@ Remember that for later use.
Last update:
- July 15, 2023 11:31:41
+ July 26, 2023 16:06:01
diff --git a/Plex/Tips/Plex-media-server/index.html b/Plex/Tips/Plex-media-server/index.html
index 969695f46..16f446d41 100644
--- a/Plex/Tips/Plex-media-server/index.html
+++ b/Plex/Tips/Plex-media-server/index.html
@@ -3005,7 +3005,7 @@
Suggested: Enabled
-TIP - Autoscan - [CLICK TO EXPAND]
+TIP - Autoscan - [Click to show/hide]
If for some reason ex. your operating systems don’t provide this trigger or your storage is mounted on a network (SMB/NFS/Cloud Storage) or your library just doesn't automatically scan, or is just plain impractical, You might want to consider using autoscan. IBRACORP (A Youtube channel I collaborate with) has a video explaining it in further detail.
Please don't forget to check out his other Unraid Video's HERE
@@ -3204,7 +3204,7 @@
Libraries
Here you will find your libraries you've added to your Plex Media Server.
-Examples - [CLICK TO EXPAND]
+Examples - [Click to show/hide]
- Movies
(/data/media/movies)
- Movies-4K/Movies-UHD
(/data/media/movies4k)/(/data/media/movies-uhd)
@@ -3373,7 +3373,7 @@ If you want you could disable it, the choice is yours.
Last update:
- January 12, 2023 21:51:13
+ July 26, 2023 16:06:01
diff --git a/Radarr/Radarr-Quality-Settings-File-Size/index.html b/Radarr/Radarr-Quality-Settings-File-Size/index.html
index 389bddd6c..729863f2c 100644
--- a/Radarr/Radarr-Quality-Settings-File-Size/index.html
+++ b/Radarr/Radarr-Quality-Settings-File-Size/index.html
@@ -2420,7 +2420,7 @@ Well, it's actually personal preference so I will show you my recommendations.
These Quality Settings have been created and tested with info I got from others, and release comparisons from different sources.
-FAQ - [CLICK TO EXPAND]
+FAQ - [Click to show/hide]
FAQ
Q: Why do you only show starting from HDTV720p?
A: With the big screens these days anything lower doesn't look watchable
@@ -2545,7 +2545,7 @@ Well, it's actually personal preference so I will show you my recommendations.
Last update:
- January 12, 2023 21:51:13
+ July 26, 2023 16:06:01
diff --git a/Radarr/Radarr-collection-of-custom-formats/index.html b/Radarr/Radarr-collection-of-custom-formats/index.html
index 1df399cb7..d5d07e92d 100644
--- a/Radarr/Radarr-collection-of-custom-formats/index.html
+++ b/Radarr/Radarr-collection-of-custom-formats/index.html
@@ -5246,12 +5246,12 @@ Special thanks to rg9400, TrueHD ATMOS
-TrueHD ATMOS - [CLICK TO EXPAND]
+TrueHD ATMOS - [Click to show/hide]
From Wikipedia, the free encyclopedia
Dolby Atmos is a surround sound technology developed by Dolby Laboratories. It expands on existing surround sound systems by adding height channels, allowing sounds to be interpreted as three-dimensional objects.
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "496f355514737f7d83bf7aa4d24f8169",
"trash_score": "5000",
@@ -5329,11 +5329,11 @@ Special thanks to rg9400, DTS X
-DTS X - [CLICK TO EXPAND]
+DTS X - [Click to show/hide]
DTS:X is an object-based audio codec, which aims to create a multi-dimensional sound that “moves around you like it would in real life”
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "2f22d89048b01681dde8afe203bf2e95",
"trash_score": "4500",
@@ -5419,7 +5419,7 @@ Special thanks to rg9400, ATMOS (undefined)
-ATMOS (undefined) - [CLICK TO EXPAND]
+ATMOS (undefined) - [Click to show/hide]
Handles cases where only Atmos is specified in title but not DD+ or TrueHD (Where it is not specified if it is Lossy or Lossless)
Note
@@ -5427,7 +5427,7 @@ Special thanks to rg9400,
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "417804f7f2c4308c1f4c5d380d4c4475",
"trash_score": "3000",
@@ -5523,11 +5523,11 @@ Special thanks to rg9400, DDPlus ATMOS
-DD+ ATMOS - [CLICK TO EXPAND]
+DD+ ATMOS - [Click to show/hide]
Atmos via UHD Blu-ray will be lossless, or lossy via streaming services so in this case it will be lossy + Atmos
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "1af239278386be2919e1bcee0bde047e",
"trash_score": "3000",
@@ -5614,12 +5614,12 @@ Special thanks to rg9400, TrueHD
-TrueHD - [CLICK TO EXPAND]
+TrueHD - [Click to show/hide]
From Wikipedia, the free encyclopedia
Dolby TrueHD is a lossless, multi-channel audio codec developed by Dolby Laboratories for home video, used principally in Blu-ray Disc and compatible hardware.
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "3cafb66171b47f226146a0770576870f",
"trash_score": "2750",
@@ -5697,12 +5697,12 @@ Special thanks to rg9400, DTS-HD MA
-DTS-HD MA - [CLICK TO EXPAND]
+DTS-HD MA - [Click to show/hide]
From Wikipedia, the free encyclopedia
DTS-HD Master Audio is a multi-channel, lossless audio codec developed by DTS as an extension of the lossy DTS Coherent Acoustics codec (DTS CA; usually itself referred to as just DTS). Rather than being an entirely new coding mechanism, DTS-HD MA encodes an audio master in lossy DTS first, then stores a concurrent stream of supplementary data representing whatever the DTS encoder discarded. This gives DTS-HD MA a lossy "core" able to be played back by devices that cannot decode the more complex lossless audio. DTS-HD MA's primary application is audio storage and playback for Blu-ray Disc media.
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "dcf3ec6938fa32445f590a4da84256cd",
"trash_score": "2500",
@@ -5798,11 +5798,11 @@ Special thanks to rg9400, FLAC
-FLAC - [CLICK TO EXPAND]
+FLAC - [Click to show/hide]
FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless, meaning that audio is compressed in FLAC without any loss in quality. This is similar to how Zip works, except with FLAC you will get much better compression because it is designed specifically for audio
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "a570d4a0e56a2874b64e5bfa55202a1b",
"trash_score": "2250",
@@ -5879,11 +5879,11 @@ Special thanks to rg9400, PCM
-PCM - [CLICK TO EXPAND]
+PCM - [Click to show/hide]
PCM is the method of encoding typically used for uncompressed digital audio
-JSON - [CLICK TO EXPAND]
+JSON - [Click to show/hide]
{
"trash_id": "e7c2fcae07cbada050a0af3357491d7b",
"trash_score": "2250",
@@ -5960,7 +5960,7 @@ Special thanks to rg9400, DTS-HD HRA
-DTS-HD HRA - [CLICK TO EXPAND]
+DTS-HD HRA - [Click to show/hide]
