diff --git a/run/root/iptable.sh b/run/root/iptable.sh
index d02bb5e..8992a16 100644
--- a/run/root/iptable.sh
+++ b/run/root/iptable.sh
@@ -42,22 +42,10 @@ if [[ $iptable_mangle_exit_code == 0 ]]; then
 
 	echo "[info] iptable_mangle support detected, adding fwmark for tables"
 
-	# setup route for rutorrent http using set-mark to route traffic for port 80 to eth0
-	echo "9080    rutorrent_http" >> /etc/iproute2/rt_tables
-	ip rule add fwmark 1 table rutorrent_http
-	ip route add default via $DEFAULT_GATEWAY table rutorrent_http
-
-	# setup route for rutorrent https using set-mark to route traffic for port 443 to eth0
-	echo "9443    rutorrent_https" >> /etc/iproute2/rt_tables
-	ip rule add fwmark 2 table rutorrent_https
-	ip route add default via $DEFAULT_GATEWAY table rutorrent_https
-
-	# setup route for flood using set-mark to route traffic for port 3000 to eth0
-	if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
-		echo "3000    flood" >> /etc/iproute2/rt_tables
-		ip rule add fwmark 3 table flood
-		ip route add default via $DEFAULT_GATEWAY table flood
-	fi
+	# setup route for qbittorrent http using set-mark to route traffic for port 8080 to eth0
+	echo "8080    qbittorrent_http" >> /etc/iproute2/rt_tables
+	ip rule add fwmark 1 table qbittorrent_http
+	ip route add default via $DEFAULT_GATEWAY table qbittorrent_http
 
 fi
 
@@ -101,19 +89,9 @@ iptables -A INPUT -s "${docker_network_cidr}" -d "${docker_network_cidr}" -j ACC
 # accept input to vpn gateway
 iptables -A INPUT -i eth0 -p $VPN_PROTOCOL --sport $VPN_PORT -j ACCEPT
 
-# accept input to rutorrent port 9080
-iptables -A INPUT -i eth0 -p tcp --dport 9080 -j ACCEPT
-iptables -A INPUT -i eth0 -p tcp --sport 9080 -j ACCEPT
-
-# accept input to rutorrent port 9443
-iptables -A INPUT -i eth0 -p tcp --dport 9443 -j ACCEPT
-iptables -A INPUT -i eth0 -p tcp --sport 9443 -j ACCEPT
-
-# accept input to flood port 3000 if enabled
-if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
-	iptables -A INPUT -i eth0 -p tcp --dport 3000 -j ACCEPT
-	iptables -A INPUT -i eth0 -p tcp --sport 3000 -j ACCEPT
-fi
+# accept input to qbittorrent port 8080
+iptables -A INPUT -i eth0 -p tcp --dport 8080 -j ACCEPT
+iptables -A INPUT -i eth0 -p tcp --sport 8080 -j ACCEPT
 
 # process lan networks in the list
 for lan_network_item in "${lan_network_list[@]}"; do
@@ -121,8 +99,8 @@ for lan_network_item in "${lan_network_list[@]}"; do
 	# strip whitespace from start and end of lan_network_item
 	lan_network_item=$(echo "${lan_network_item}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~')
 
-	# accept input to rtorrent scgi - used for lan access
-	iptables -A INPUT -i eth0 -s "${lan_network_item}" -p tcp --dport 5000 -j ACCEPT
+	# accept input to qbittorrent api - used for lan access
+	iptables -A INPUT -i eth0 -s "${lan_network_item}" -p tcp --dport 8080 -j ACCEPT
 
 	# accept input to privoxy if enabled
 	if [[ $ENABLE_PRIVOXY == "yes" ]]; then
@@ -158,35 +136,15 @@ iptables -A OUTPUT -o eth0 -p $VPN_PROTOCOL --dport $VPN_PORT -j ACCEPT
 # if iptable mangle is available (kernel module) then use mark
 if [[ $iptable_mangle_exit_code == 0 ]]; then
 
-	# accept output from rutorrent port 9080 - used for external access
-	iptables -t mangle -A OUTPUT -p tcp --dport 9080 -j MARK --set-mark 1
-	iptables -t mangle -A OUTPUT -p tcp --sport 9080 -j MARK --set-mark 1
-
-	# accept output from rutorrent port 9443 - used for external access
-	iptables -t mangle -A OUTPUT -p tcp --dport 9443 -j MARK --set-mark 2
-	iptables -t mangle -A OUTPUT -p tcp --sport 9443 -j MARK --set-mark 2
-
-	# accept output from flood port 3000 if enabled - used for external access
-	if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
-		iptables -t mangle -A OUTPUT -p tcp --dport 3000 -j MARK --set-mark 3
-		iptables -t mangle -A OUTPUT -p tcp --sport 3000 -j MARK --set-mark 3
-	fi
+	# accept output from qbittorrent port 8080 - used for external access
+	iptables -t mangle -A OUTPUT -p tcp --dport 8080 -j MARK --set-mark 1
+	iptables -t mangle -A OUTPUT -p tcp --sport 8080 -j MARK --set-mark 1
 
 fi
 
-# accept output from rutorrent port 9080 - used for lan access
-iptables -A OUTPUT -o eth0 -p tcp --dport 9080 -j ACCEPT
-iptables -A OUTPUT -o eth0 -p tcp --sport 9080 -j ACCEPT
-
-# accept output from rutorrent port 9443 - used for lan access
-iptables -A OUTPUT -o eth0 -p tcp --dport 9443 -j ACCEPT
-iptables -A OUTPUT -o eth0 -p tcp --sport 9443 -j ACCEPT
-
-# accept output from flood port 3000 if enabled - used for lan access
-if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
-	iptables -A OUTPUT -o eth0 -p tcp --dport 3000 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p tcp --sport 3000 -j ACCEPT
-fi
+# accept output from qbittorrent port 8080 - used for lan access
+iptables -A OUTPUT -o eth0 -p tcp --dport 8080 -j ACCEPT
+iptables -A OUTPUT -o eth0 -p tcp --sport 8080 -j ACCEPT
 
 # process lan networks in the list
 for lan_network_item in "${lan_network_list[@]}"; do
@@ -194,8 +152,8 @@ for lan_network_item in "${lan_network_list[@]}"; do
 	# strip whitespace from start and end of lan_network_item
 	lan_network_item=$(echo "${lan_network_item}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~')
 
-	# accept output to rtorrent scgi - used for lan access
-	iptables -A OUTPUT -o eth0 -d "${lan_network_item}" -p tcp --sport 5000 -j ACCEPT
+	# accept output to qbittorrent api - used for lan access
+	iptables -A OUTPUT -o eth0 -d "${lan_network_item}" -p tcp --sport 8080 -j ACCEPT
 
 	# accept output from privoxy if enabled - used for lan access
 	if [[ $ENABLE_PRIVOXY == "yes" ]]; then