You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
222 lines
7.5 KiB
222 lines
7.5 KiB
#!/bin/bash
|
|
|
|
# change openvpn config 'tcp-client' to compatible iptables 'tcp'
|
|
if [[ "${VPN_PROTOCOL}" == "tcp-client" ]]; then
|
|
export VPN_PROTOCOL="tcp"
|
|
fi
|
|
|
|
# ip route
|
|
###
|
|
|
|
# split comma seperated string into list from LAN_NETWORK env variable
|
|
IFS=',' read -ra lan_network_list <<< "${LAN_NETWORK}"
|
|
|
|
# process lan networks in the list
|
|
for lan_network_item in "${lan_network_list[@]}"; do
|
|
|
|
# strip whitespace from start and end of lan_network_item
|
|
lan_network_item=$(echo "${lan_network_item}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~')
|
|
|
|
echo "[info] Adding ${lan_network_item} as route via docker eth0"
|
|
ip route add "${lan_network_item}" via "${DEFAULT_GATEWAY}" dev eth0
|
|
|
|
done
|
|
|
|
echo "[info] ip route defined as follows..."
|
|
echo "--------------------"
|
|
ip route
|
|
echo "--------------------"
|
|
|
|
# setup iptables marks to allow routing of defined ports via eth0
|
|
###
|
|
|
|
if [[ "${DEBUG}" == "true" ]]; then
|
|
echo "[debug] Modules currently loaded for kernel" ; lsmod
|
|
fi
|
|
|
|
# check we have iptable_mangle, if so setup fwmark
|
|
lsmod | grep iptable_mangle
|
|
iptable_mangle_exit_code=$?
|
|
|
|
if [[ $iptable_mangle_exit_code == 0 ]]; then
|
|
|
|
echo "[info] iptable_mangle support detected, adding fwmark for tables"
|
|
|
|
# setup route for rutorrent http using set-mark to route traffic for port 80 to eth0
|
|
echo "9080 rutorrent_http" >> /etc/iproute2/rt_tables
|
|
ip rule add fwmark 1 table rutorrent_http
|
|
ip route add default via $DEFAULT_GATEWAY table rutorrent_http
|
|
|
|
# setup route for rutorrent https using set-mark to route traffic for port 443 to eth0
|
|
echo "9443 rutorrent_https" >> /etc/iproute2/rt_tables
|
|
ip rule add fwmark 2 table rutorrent_https
|
|
ip route add default via $DEFAULT_GATEWAY table rutorrent_https
|
|
|
|
# setup route for flood using set-mark to route traffic for port 3000 to eth0
|
|
if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
|
|
echo "3000 flood" >> /etc/iproute2/rt_tables
|
|
ip rule add fwmark 3 table flood
|
|
ip route add default via $DEFAULT_GATEWAY table flood
|
|
fi
|
|
|
|
fi
|
|
|
|
# identify docker bridge interface name (probably eth0)
|
|
docker_interface=$(netstat -ie | grep -vE "lo|tun|tap" | sed -n '1!p' | grep -P -o -m 1 '^[^:]+')
|
|
if [[ "${DEBUG}" == "true" ]]; then
|
|
echo "[debug] Docker interface defined as ${docker_interface}"
|
|
fi
|
|
|
|
# identify ip for docker bridge interface
|
|
docker_ip=$(ifconfig "${docker_interface}" | grep -P -o -m 1 '(?<=inet\s)[^\s]+')
|
|
if [[ "${DEBUG}" == "true" ]]; then
|
|
echo "[debug] Docker IP defined as ${docker_ip}"
|
|
fi
|
|
|
|
# identify netmask for docker bridge interface
|
|
docker_mask=$(ifconfig "${docker_interface}" | grep -P -o -m 1 '(?<=netmask\s)[^\s]+')
|
|
if [[ "${DEBUG}" == "true" ]]; then
|
|
echo "[debug] Docker netmask defined as ${docker_mask}"
|
|
fi
|
|
|
|
# convert netmask into cidr format
|
|
docker_network_cidr=$(ipcalc "${docker_ip}" "${docker_mask}" | grep -P -o -m 1 "(?<=Network:)\s+[^\s]+")
|
|
echo "[info] Docker network defined as ${docker_network_cidr}"
|
|
|
|
# input iptable rules
|
|
###
|
|
|
|
# set policy to drop ipv4 for input
|
|
iptables -P INPUT DROP
|
|
|
|
# set policy to drop ipv6 for input
|
|
ip6tables -P INPUT DROP 1>&- 2>&-
|
|
|
|
# accept input to tunnel adapter
|
|
iptables -A INPUT -i "${VPN_DEVICE_TYPE}" -j ACCEPT
|
|
|
|
# accept input to/from docker containers (172.x range is internal dhcp)
|
|
iptables -A INPUT -s "${docker_network_cidr}" -d "${docker_network_cidr}" -j ACCEPT
|
|
|
|
# accept input to vpn gateway
|
|
iptables -A INPUT -i eth0 -p $VPN_PROTOCOL --sport $VPN_PORT -j ACCEPT
|
|
|
|
# accept input to rutorrent port 9080
|
|
iptables -A INPUT -i eth0 -p tcp --dport 9080 -j ACCEPT
|
|
iptables -A INPUT -i eth0 -p tcp --sport 9080 -j ACCEPT
|
|
|
|
# accept input to rutorrent port 9443
|
|
iptables -A INPUT -i eth0 -p tcp --dport 9443 -j ACCEPT
|
|
iptables -A INPUT -i eth0 -p tcp --sport 9443 -j ACCEPT
|
|
|
|
# accept input to flood port 3000 if enabled
|
|
if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
|
|
iptables -A INPUT -i eth0 -p tcp --dport 3000 -j ACCEPT
|
|
iptables -A INPUT -i eth0 -p tcp --sport 3000 -j ACCEPT
|
|
fi
|
|
|
|
# process lan networks in the list
|
|
for lan_network_item in "${lan_network_list[@]}"; do
|
|
|
|
# strip whitespace from start and end of lan_network_item
|
|
lan_network_item=$(echo "${lan_network_item}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~')
|
|
|
|
# accept input to rtorrent scgi - used for lan access
|
|
iptables -A INPUT -i eth0 -s "${lan_network_item}" -p tcp --dport 5000 -j ACCEPT
|
|
|
|
# accept input to privoxy if enabled
|
|
if [[ $ENABLE_PRIVOXY == "yes" ]]; then
|
|
iptables -A INPUT -i eth0 -p tcp -s "${lan_network_item}" -d "${docker_network_cidr}" -j ACCEPT
|
|
fi
|
|
|
|
done
|
|
|
|
# accept input icmp (ping)
|
|
iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT
|
|
|
|
# accept input to local loopback
|
|
iptables -A INPUT -i lo -j ACCEPT
|
|
|
|
# output iptable rules
|
|
###
|
|
|
|
# set policy to drop ipv4 for output
|
|
iptables -P OUTPUT DROP
|
|
|
|
# set policy to drop ipv6 for output
|
|
ip6tables -P OUTPUT DROP 1>&- 2>&-
|
|
|
|
# accept output from tunnel adapter
|
|
iptables -A OUTPUT -o "${VPN_DEVICE_TYPE}" -j ACCEPT
|
|
|
|
# accept output to/from docker containers (172.x range is internal dhcp)
|
|
iptables -A OUTPUT -s "${docker_network_cidr}" -d "${docker_network_cidr}" -j ACCEPT
|
|
|
|
# accept output from vpn gateway
|
|
iptables -A OUTPUT -o eth0 -p $VPN_PROTOCOL --dport $VPN_PORT -j ACCEPT
|
|
|
|
# if iptable mangle is available (kernel module) then use mark
|
|
if [[ $iptable_mangle_exit_code == 0 ]]; then
|
|
|
|
# accept output from rutorrent port 9080 - used for external access
|
|
iptables -t mangle -A OUTPUT -p tcp --dport 9080 -j MARK --set-mark 1
|
|
iptables -t mangle -A OUTPUT -p tcp --sport 9080 -j MARK --set-mark 1
|
|
|
|
# accept output from rutorrent port 9443 - used for external access
|
|
iptables -t mangle -A OUTPUT -p tcp --dport 9443 -j MARK --set-mark 2
|
|
iptables -t mangle -A OUTPUT -p tcp --sport 9443 -j MARK --set-mark 2
|
|
|
|
# accept output from flood port 3000 if enabled - used for external access
|
|
if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
|
|
iptables -t mangle -A OUTPUT -p tcp --dport 3000 -j MARK --set-mark 3
|
|
iptables -t mangle -A OUTPUT -p tcp --sport 3000 -j MARK --set-mark 3
|
|
fi
|
|
|
|
fi
|
|
|
|
# accept output from rutorrent port 9080 - used for lan access
|
|
iptables -A OUTPUT -o eth0 -p tcp --dport 9080 -j ACCEPT
|
|
iptables -A OUTPUT -o eth0 -p tcp --sport 9080 -j ACCEPT
|
|
|
|
# accept output from rutorrent port 9443 - used for lan access
|
|
iptables -A OUTPUT -o eth0 -p tcp --dport 9443 -j ACCEPT
|
|
iptables -A OUTPUT -o eth0 -p tcp --sport 9443 -j ACCEPT
|
|
|
|
# accept output from flood port 3000 if enabled - used for lan access
|
|
if [[ $ENABLE_FLOOD == "yes" || $ENABLE_FLOOD == "both" ]]; then
|
|
iptables -A OUTPUT -o eth0 -p tcp --dport 3000 -j ACCEPT
|
|
iptables -A OUTPUT -o eth0 -p tcp --sport 3000 -j ACCEPT
|
|
fi
|
|
|
|
# process lan networks in the list
|
|
for lan_network_item in "${lan_network_list[@]}"; do
|
|
|
|
# strip whitespace from start and end of lan_network_item
|
|
lan_network_item=$(echo "${lan_network_item}" | sed -e 's~^[ \t]*~~;s~[ \t]*$~~')
|
|
|
|
# accept output to rtorrent scgi - used for lan access
|
|
iptables -A OUTPUT -o eth0 -d "${lan_network_item}" -p tcp --sport 5000 -j ACCEPT
|
|
|
|
# accept output from privoxy if enabled - used for lan access
|
|
if [[ $ENABLE_PRIVOXY == "yes" ]]; then
|
|
iptables -A OUTPUT -o eth0 -p tcp -s "${docker_network_cidr}" -d "${lan_network_item}" -j ACCEPT
|
|
fi
|
|
|
|
done
|
|
|
|
# accept output for icmp (ping)
|
|
iptables -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT
|
|
|
|
# accept output from local loopback adapter
|
|
iptables -A OUTPUT -o lo -j ACCEPT
|
|
|
|
echo "[info] iptables defined as follows..."
|
|
echo "--------------------"
|
|
iptables -S
|
|
echo "--------------------"
|
|
|
|
# change iptable 'tcp' to openvpn config compatible 'tcp-client' (this file is sourced)
|
|
if [[ "${VPN_PROTOCOL}" == "tcp" ]]; then
|
|
export VPN_PROTOCOL="tcp-client"
|
|
fi
|