import array import os import struct import sys from ._exceptions import * from ._utils import validate_utf8 from threading import Lock """ _abnf.py websocket - WebSocket client library for Python Copyright 2022 engn33r Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. """ try: # If wsaccel is available, use compiled routines to mask data. # wsaccel only provides around a 10% speed boost compared # to the websocket-client _mask() implementation. # Note that wsaccel is unmaintained. from wsaccel.xormask import XorMaskerSimple def _mask(_m, _d): return XorMaskerSimple(_m).process(_d) except ImportError: # wsaccel is not available, use websocket-client _mask() native_byteorder = sys.byteorder def _mask(mask_value, data_value): datalen = len(data_value) data_value = int.from_bytes(data_value, native_byteorder) mask_value = int.from_bytes(mask_value * (datalen // 4) + mask_value[: datalen % 4], native_byteorder) return (data_value ^ mask_value).to_bytes(datalen, native_byteorder) __all__ = [ 'ABNF', 'continuous_frame', 'frame_buffer', 'STATUS_NORMAL', 'STATUS_GOING_AWAY', 'STATUS_PROTOCOL_ERROR', 'STATUS_UNSUPPORTED_DATA_TYPE', 'STATUS_STATUS_NOT_AVAILABLE', 'STATUS_ABNORMAL_CLOSED', 'STATUS_INVALID_PAYLOAD', 'STATUS_POLICY_VIOLATION', 'STATUS_MESSAGE_TOO_BIG', 'STATUS_INVALID_EXTENSION', 'STATUS_UNEXPECTED_CONDITION', 'STATUS_BAD_GATEWAY', 'STATUS_TLS_HANDSHAKE_ERROR', ] # closing frame status codes. STATUS_NORMAL = 1000 STATUS_GOING_AWAY = 1001 STATUS_PROTOCOL_ERROR = 1002 STATUS_UNSUPPORTED_DATA_TYPE = 1003 STATUS_STATUS_NOT_AVAILABLE = 1005 STATUS_ABNORMAL_CLOSED = 1006 STATUS_INVALID_PAYLOAD = 1007 STATUS_POLICY_VIOLATION = 1008 STATUS_MESSAGE_TOO_BIG = 1009 STATUS_INVALID_EXTENSION = 1010 STATUS_UNEXPECTED_CONDITION = 1011 STATUS_SERVICE_RESTART = 1012 STATUS_TRY_AGAIN_LATER = 1013 STATUS_BAD_GATEWAY = 1014 STATUS_TLS_HANDSHAKE_ERROR = 1015 VALID_CLOSE_STATUS = ( STATUS_NORMAL, STATUS_GOING_AWAY, STATUS_PROTOCOL_ERROR, STATUS_UNSUPPORTED_DATA_TYPE, STATUS_INVALID_PAYLOAD, STATUS_POLICY_VIOLATION, STATUS_MESSAGE_TOO_BIG, STATUS_INVALID_EXTENSION, STATUS_UNEXPECTED_CONDITION, STATUS_SERVICE_RESTART, STATUS_TRY_AGAIN_LATER, STATUS_BAD_GATEWAY, ) class ABNF: """ ABNF frame class. See http://tools.ietf.org/html/rfc5234 and http://tools.ietf.org/html/rfc6455#section-5.2 """ # operation code values. OPCODE_CONT = 0x0 OPCODE_TEXT = 0x1 OPCODE_BINARY = 0x2 OPCODE_CLOSE = 0x8 OPCODE_PING = 0x9 OPCODE_PONG = 0xa # available operation code value tuple OPCODES = (OPCODE_CONT, OPCODE_TEXT, OPCODE_BINARY, OPCODE_CLOSE, OPCODE_PING, OPCODE_PONG) # opcode human readable string OPCODE_MAP = { OPCODE_CONT: "cont", OPCODE_TEXT: "text", OPCODE_BINARY: "binary", OPCODE_CLOSE: "close", OPCODE_PING: "ping", OPCODE_PONG: "pong" } # data length threshold. LENGTH_7 = 0x7e LENGTH_16 = 1 << 16 LENGTH_63 = 1 << 63 def __init__(self, fin=0, rsv1=0, rsv2=0, rsv3=0, opcode=OPCODE_TEXT, mask=1, data=""): """ Constructor for ABNF. Please check RFC for arguments. """ self.fin = fin self.rsv1 = rsv1 self.rsv2 = rsv2 self.rsv3 = rsv3 self.opcode = opcode self.mask = mask if data is None: data = "" self.data = data self.get_mask_key = os.urandom def validate(self, skip_utf8_validation=False) -> None: """ Validate the ABNF frame. Parameters ---------- skip_utf8_validation: skip utf8 validation. """ if self.rsv1 or self.rsv2 or self.rsv3: raise WebSocketProtocolException("rsv is not implemented, yet") if self.opcode not in ABNF.OPCODES: raise WebSocketProtocolException("Invalid opcode %r", self.opcode) if self.opcode == ABNF.OPCODE_PING and not self.fin: raise WebSocketProtocolException("Invalid ping frame.") if self.opcode == ABNF.OPCODE_CLOSE: l = len(self.data) if not l: return if l == 1 or l >= 126: raise WebSocketProtocolException("Invalid close frame.") if l > 2 and not skip_utf8_validation and not validate_utf8(self.data[2:]): raise WebSocketProtocolException("Invalid close frame.") code = 256 * self.data[0] + self.data[1] if not self._is_valid_close_status(code): raise WebSocketProtocolException("Invalid close opcode %r", code) @staticmethod def _is_valid_close_status(code: int) -> bool: return code in VALID_CLOSE_STATUS or (3000 <= code < 5000) def __str__(self) -> str: return "fin=" + str(self.fin) \ + " opcode=" + str(self.opcode) \ + " data=" + str(self.data) @staticmethod def create_frame(data, opcode, fin=1): """ Create frame to send text, binary and other data. Parameters ---------- data: data to send. This is string value(byte array). If opcode is OPCODE_TEXT and this value is unicode, data value is converted into unicode string, automatically. opcode: operation code. please see OPCODE_XXX. fin: fin flag. if set to 0, create continue fragmentation. """ if opcode == ABNF.OPCODE_TEXT and isinstance(data, str): data = data.encode("utf-8") # mask must be set if send data from client return ABNF(fin, 0, 0, 0, opcode, 1, data) def format(self) -> bytes: """ Format this object to string(byte array) to send data to server. """ if any(x not in (0, 1) for x in [self.fin, self.rsv1, self.rsv2, self.rsv3]): raise ValueError("not 0 or 1") if self.opcode not in ABNF.OPCODES: raise ValueError("Invalid OPCODE") length = len(self.data) if length >= ABNF.LENGTH_63: raise ValueError("data is too long") frame_header = chr(self.fin << 7 | self.rsv1 << 6 | self.rsv2 << 5 | self.rsv3 << 4 | self.opcode).encode('latin-1') if length < ABNF.LENGTH_7: frame_header += chr(self.mask << 7 | length).encode('latin-1') elif length < ABNF.LENGTH_16: frame_header += chr(self.mask << 7 | 0x7e).encode('latin-1') frame_header += struct.pack("!H", length) else: frame_header += chr(self.mask << 7 | 0x7f).encode('latin-1') frame_header += struct.pack("!Q", length) if not self.mask: return frame_header + self.data else: mask_key = self.get_mask_key(4) return frame_header + self._get_masked(mask_key) def _get_masked(self, mask_key): s = ABNF.mask(mask_key, self.data) if isinstance(mask_key, str): mask_key = mask_key.encode('utf-8') return mask_key + s @staticmethod def mask(mask_key, data): """ Mask or unmask data. Just do xor for each byte Parameters ---------- mask_key: bytes or str 4 byte mask. data: bytes or str data to mask/unmask. """ if data is None: data = "" if isinstance(mask_key, str): mask_key = mask_key.encode('latin-1') if isinstance(data, str): data = data.encode('latin-1') return _mask(array.array("B", mask_key), array.array("B", data)) class frame_buffer: _HEADER_MASK_INDEX = 5 _HEADER_LENGTH_INDEX = 6 def __init__(self, recv_fn, skip_utf8_validation): self.recv = recv_fn self.skip_utf8_validation = skip_utf8_validation # Buffers over the packets from the layer beneath until desired amount # bytes of bytes are received. self.recv_buffer = [] self.clear() self.lock = Lock() def clear(self): self.header = None self.length = None self.mask = None def has_received_header(self) -> bool: return self.header is None def recv_header(self): header = self.recv_strict(2) b1 = header[0] fin = b1 >> 7 & 1 rsv1 = b1 >> 6 & 1 rsv2 = b1 >> 5 & 1 rsv3 = b1 >> 4 & 1 opcode = b1 & 0xf b2 = header[1] has_mask = b2 >> 7 & 1 length_bits = b2 & 0x7f self.header = (fin, rsv1, rsv2, rsv3, opcode, has_mask, length_bits) def has_mask(self): if not self.header: return False return self.header[frame_buffer._HEADER_MASK_INDEX] def has_received_length(self) -> bool: return self.length is None def recv_length(self): bits = self.header[frame_buffer._HEADER_LENGTH_INDEX] length_bits = bits & 0x7f if length_bits == 0x7e: v = self.recv_strict(2) self.length = struct.unpack("!H", v)[0] elif length_bits == 0x7f: v = self.recv_strict(8) self.length = struct.unpack("!Q", v)[0] else: self.length = length_bits def has_received_mask(self) -> bool: return self.mask is None def recv_mask(self): self.mask = self.recv_strict(4) if self.has_mask() else "" def recv_frame(self): with self.lock: # Header if self.has_received_header(): self.recv_header() (fin, rsv1, rsv2, rsv3, opcode, has_mask, _) = self.header # Frame length if self.has_received_length(): self.recv_length() length = self.length # Mask if self.has_received_mask(): self.recv_mask() mask = self.mask # Payload payload = self.recv_strict(length) if has_mask: payload = ABNF.mask(mask, payload) # Reset for next frame self.clear() frame = ABNF(fin, rsv1, rsv2, rsv3, opcode, has_mask, payload) frame.validate(self.skip_utf8_validation) return frame def recv_strict(self, bufsize: int) -> bytes: shortage = bufsize - sum(map(len, self.recv_buffer)) while shortage > 0: # Limit buffer size that we pass to socket.recv() to avoid # fragmenting the heap -- the number of bytes recv() actually # reads is limited by socket buffer and is relatively small, # yet passing large numbers repeatedly causes lots of large # buffers allocated and then shrunk, which results in # fragmentation. bytes_ = self.recv(min(16384, shortage)) self.recv_buffer.append(bytes_) shortage -= len(bytes_) unified = b"".join(self.recv_buffer) if shortage == 0: self.recv_buffer = [] return unified else: self.recv_buffer = [unified[bufsize:]] return unified[:bufsize] class continuous_frame: def __init__(self, fire_cont_frame, skip_utf8_validation): self.fire_cont_frame = fire_cont_frame self.skip_utf8_validation = skip_utf8_validation self.cont_data = None self.recving_frames = None def validate(self, frame): if not self.recving_frames and frame.opcode == ABNF.OPCODE_CONT: raise WebSocketProtocolException("Illegal frame") if self.recving_frames and \ frame.opcode in (ABNF.OPCODE_TEXT, ABNF.OPCODE_BINARY): raise WebSocketProtocolException("Illegal frame") def add(self, frame): if self.cont_data: self.cont_data[1] += frame.data else: if frame.opcode in (ABNF.OPCODE_TEXT, ABNF.OPCODE_BINARY): self.recving_frames = frame.opcode self.cont_data = [frame.opcode, frame.data] if frame.fin: self.recving_frames = None def is_fire(self, frame): return frame.fin or self.fire_cont_frame def extract(self, frame): data = self.cont_data self.cont_data = None frame.data = data[1] if not self.fire_cont_frame and data[0] == ABNF.OPCODE_TEXT and not self.skip_utf8_validation and not validate_utf8(frame.data): raise WebSocketPayloadException( "cannot decode: " + repr(frame.data)) return [data[0], frame]