You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
jellyfin/Jellyfin.Networking/Configuration/NetworkConfiguration.cs

231 lines
8.9 KiB

#pragma warning disable CA1819 // Properties should not return arrays
using System;
namespace Jellyfin.Networking.Configuration
{
/// <summary>
/// Defines the <see cref="NetworkConfiguration" />.
/// </summary>
public class NetworkConfiguration
{
/// <summary>
/// The default value for <see cref="HttpServerPortNumber"/>.
/// </summary>
public const int DefaultHttpPort = 8096;
/// <summary>
/// The default value for <see cref="PublicHttpsPort"/> and <see cref="HttpsPortNumber"/>.
/// </summary>
public const int DefaultHttpsPort = 8920;
private string _baseUrl = string.Empty;
/// <summary>
/// Gets or sets a value indicating whether the server should force connections over HTTPS.
/// </summary>
public bool RequireHttps { get; set; }
/// <summary>
/// Gets or sets the filesystem path of an X.509 certificate to use for SSL.
/// </summary>
public string CertificatePath { get; set; } = string.Empty;
/// <summary>
/// Gets or sets the password required to access the X.509 certificate data in the file specified by <see cref="CertificatePath"/>.
/// </summary>
public string CertificatePassword { get; set; } = string.Empty;
/// <summary>
/// Gets or sets a value used to specify the URL prefix that your Jellyfin instance can be accessed at.
/// </summary>
public string BaseUrl
{
get => _baseUrl;
set
{
// Normalize the start of the string
if (string.IsNullOrWhiteSpace(value))
{
// If baseUrl is empty, set an empty prefix string
_baseUrl = string.Empty;
return;
}
if (value[0] != '/')
{
// If baseUrl was not configured with a leading slash, append one for consistency
value = "/" + value;
}
// Normalize the end of the string
if (value[^1] == '/')
{
// If baseUrl was configured with a trailing slash, remove it for consistency
value = value.Remove(value.Length - 1);
}
_baseUrl = value;
}
}
/// <summary>
/// Gets or sets the public HTTPS port.
/// </summary>
/// <value>The public HTTPS port.</value>
public int PublicHttpsPort { get; set; } = DefaultHttpsPort;
/// <summary>
/// Gets or sets the HTTP server port number.
/// </summary>
/// <value>The HTTP server port number.</value>
public int HttpServerPortNumber { get; set; } = DefaultHttpPort;
/// <summary>
/// Gets or sets the HTTPS server port number.
/// </summary>
/// <value>The HTTPS server port number.</value>
public int HttpsPortNumber { get; set; } = DefaultHttpsPort;
/// <summary>
/// Gets or sets a value indicating whether to use HTTPS.
/// </summary>
/// <remarks>
/// In order for HTTPS to be used, in addition to setting this to true, valid values must also be
/// provided for <see cref="CertificatePath"/> and <see cref="CertificatePassword"/>.
/// </remarks>
public bool EnableHttps { get; set; }
/// <summary>
/// Gets or sets the public mapped port.
/// </summary>
/// <value>The public mapped port.</value>
public int PublicPort { get; set; } = DefaultHttpPort;
/// <summary>
/// Gets or sets a value indicating whether the http port should be mapped as part of UPnP automatic port forwarding.
/// </summary>
public bool UPnPCreateHttpPortMap { get; set; }
/// <summary>
/// Gets or sets the UDPPortRange.
/// </summary>
public string UDPPortRange { get; set; } = string.Empty;
/// <summary>
/// Gets or sets a value indicating whether gets or sets IPV6 capability.
/// </summary>
public bool EnableIPV6 { get; set; }
/// <summary>
/// Gets or sets a value indicating whether gets or sets IPV4 capability.
/// </summary>
public bool EnableIPV4 { get; set; } = true;
/// <summary>
/// Gets or sets a value indicating whether detailed SSDP logs are sent to the console/log.
/// "Emby.Dlna": "Debug" must be set in logging.default.json for this property to have any effect.
/// </summary>
public bool EnableSSDPTracing { get; set; }
/// <summary>
/// Gets or sets the SSDPTracingFilter
/// Gets or sets a value indicating whether an IP address is to be used to filter the detailed ssdp logs that are being sent to the console/log.
/// If the setting "Emby.Dlna": "Debug" msut be set in logging.default.json for this property to work.
/// </summary>
public string SSDPTracingFilter { get; set; } = string.Empty;
/// <summary>
/// Gets or sets the number of times SSDP UDP messages are sent.
/// </summary>
public int UDPSendCount { get; set; } = 2;
/// <summary>
/// Gets or sets the delay between each groups of SSDP messages (in ms).
/// </summary>
public int UDPSendDelay { get; set; } = 100;
/// <summary>
/// Gets or sets a value indicating whether address names that match <see cref="VirtualInterfaceNames"/> should be Ignore for the purposes of binding.
/// </summary>
public bool IgnoreVirtualInterfaces { get; set; } = true;
/// <summary>
/// Gets or sets a value indicating the interfaces that should be ignored. The list can be comma separated. <seealso cref="IgnoreVirtualInterfaces"/>.
/// </summary>
public string VirtualInterfaceNames { get; set; } = "vEthernet*";
/// <summary>
/// Gets or sets the time (in seconds) between the pings of SSDP gateway monitor.
/// </summary>
public int GatewayMonitorPeriod { get; set; } = 60;
/// <summary>
/// Gets a value indicating whether multi-socket binding is available.
/// </summary>
public bool EnableMultiSocketBinding { get; } = true;
/// <summary>
/// Gets or sets a value indicating whether all IPv6 interfaces should be treated as on the internal network.
/// Depending on the address range implemented ULA ranges might not be used.
/// </summary>
public bool TrustAllIP6Interfaces { get; set; }
/// <summary>
/// Gets or sets the ports that HDHomerun uses.
/// </summary>
public string HDHomerunPortRange { get; set; } = string.Empty;
/// <summary>
/// Gets or sets the PublishedServerUriBySubnet
/// Gets or sets PublishedServerUri to advertise for specific subnets.
/// </summary>
public string[] PublishedServerUriBySubnet { get; set; } = Array.Empty<string>();
/// <summary>
/// Gets or sets a value indicating whether Autodiscovery tracing is enabled.
/// </summary>
public bool AutoDiscoveryTracing { get; set; }
/// <summary>
/// Gets or sets a value indicating whether Autodiscovery is enabled.
/// </summary>
public bool AutoDiscovery { get; set; } = true;
/// <summary>
/// Gets or sets the filter for remote IP connectivity. Used in conjuntion with <seealso cref="IsRemoteIPFilterBlacklist"/>.
/// </summary>
public string[] RemoteIPFilter { get; set; } = Array.Empty<string>();
/// <summary>
/// Gets or sets a value indicating whether <seealso cref="RemoteIPFilter"/> contains a blacklist or a whitelist. Default is a whitelist.
/// </summary>
public bool IsRemoteIPFilterBlacklist { get; set; }
/// <summary>
/// Gets or sets a value indicating whether to enable automatic port forwarding.
/// </summary>
public bool EnableUPnP { get; set; }
/// <summary>
/// Gets or sets a value indicating whether access outside of the LAN is permitted.
/// </summary>
public bool EnableRemoteAccess { get; set; } = true;
/// <summary>
/// Gets or sets the subnets that are deemed to make up the LAN.
/// </summary>
public string[] LocalNetworkSubnets { get; set; } = Array.Empty<string>();
/// <summary>
/// Gets or sets the interface addresses which Jellyfin will bind to. If empty, all interfaces will be used.
/// </summary>
public string[] LocalNetworkAddresses { get; set; } = Array.Empty<string>();
/// <summary>
/// Gets or sets the known proxies. If the proxy is a network, it's added to the KnownNetworks.
/// </summary>
public string[] KnownProxies { get; set; } = Array.Empty<string>();
}
}