Merge pull request #1090 from TRaSH-/Guide-Fix-Deprecated-additional-admonition-qualifiers

[Guide] Fix Deprecated additional admonition qualifiers
pull/1078/head^2
TRaSH 2 years ago committed by GitHub
commit 8677d69616
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -3,7 +3,7 @@
After you've installed everything it's best to check all of your settings,
!!! attention
!!! warning
Bazarr only searches for subs for Episodes and Movies that are added after the install.
So you will need to set the preferred languages for your existing Shows and Movies.

@ -83,7 +83,7 @@ Click on `Add` and you will get an extra option
1. Here you enter the path that Sonarr uses to access your shows.
1. Here you enter the path that Bazarr uses to access your shows.
!!! attention
!!! warning
**IF YOU GOT THE SAME VALUES ON BOTH SIDES THEN YOU DON'T NEED IT!!!**
@ -171,7 +171,7 @@ Click on `Add` and you will get an extra option
1. Here you enter the path that Radarr uses to access your movies.
1. Here you enter the path that Bazarr uses to access your movies.
!!! attention
!!! warning
**IF YOU GOT THE SAME VALUES ON BOTH SIDES THEN YOU DON'T NEED IT!!!**
@ -326,7 +326,7 @@ Now wait until Bazarr gets all the info needed from Sonarr/Radarr.
## IMPORTANT
!!! important
!!! tip
**Don't forget [After Install Configuration](/Bazarr/After-install-configuration/)!!!**

@ -69,7 +69,7 @@ I will only explain the so called most important paths.
![!queue](images/queue.png)
!!! caution
!!! warning
`WriteBuffer`: If you're low on memory don't set this to high.
## LOGGING

@ -20,17 +20,17 @@
1. For consistency with other torrents I recommend leaving this on `Original`.
!!! check ""
!!! success ""
**Suggested: `Original`**
1. Delete the .torrent file after it has been added to qBittorrent.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
1. Pre-allocated disk space for the added torrents, this limits fragmentation and also makes sure if you use a cache drive or a feeder disk that the space is available.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
!!! warning
@ -43,27 +43,27 @@
1. Make sure this is set to `Automatic`. Your downloads will not go into the category folder otherwise.
!!! check ""
!!! success ""
**Suggested: `Automatic`**
1. This helps you to manage your file location based on categories.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Same as `Step 2`
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Your download root path (Download folder/location).
!!! check ""
!!! success ""
**Read the `ATTENTION` block below**
1. If you enable this, your incomplete downloads will be placed in this directory until completed. This could be useful if you want your downloads to use a separate SSD/Feeder disk[^1], but this also results in extra unnecessary moves or in worse cases a slower and more I/O intensive copy + delete.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
#### ATTENTION
@ -81,22 +81,22 @@
1. Set this to TCP for the best performance
!!! check ""
!!! success ""
**Suggested: `TCP`**
1. Your port used for incoming connections, this is the port you opened in your router/firewall or port forwarded at your VPN provider to make sure you're connectable.
!!! check ""
!!! success ""
**Suggested: `The port you opened in your router/firewall or port forwarded at your VPN provider`**
1. This should be disabled in your router for several security reasons.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Make sure this is disabled so you don't mess up the forwarded port.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
### Connections Limits
@ -105,7 +105,7 @@
The best settings for this depends on many factors so I won't be covering this.
!!! check ""
!!! success ""
**Suggested: `personal preference based on your setup and connection.`**
### Proxy Server
@ -114,7 +114,7 @@ The best settings for this depends on many factors so I won't be covering this.
This is where you would add for example your SOCKS5 settings from your VPN provider.
!!! check ""
!!! success ""
**Suggested: `I personally don't recommend this unsecure option being it's un-encrypted and only spoofs your IP.`**
------
@ -133,7 +133,7 @@ The best settings depends on many factors.
- Your hardware used.
- Bandwidth needed by other services in your home network.
!!! check ""
!!! success ""
**Suggested: `For a home connection that you use with others it's best practice to set the upload/download rate to about 70-80% of your maximum upload/download speed.`**
### Alternative Rate Limits
@ -147,7 +147,7 @@ Examples:
- Limit your upload/download rate during daytime when you make most use of it, and unlimited it during nighttime when no one is using the connection.
- If you have an internet connection that's limited during specific hours (unlimited bandwidth during the night, but limited during the day)
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
### Rate Limits Settings
@ -158,17 +158,17 @@ Not going to cover the technical part of what it does, but the following setting
1. Prevents you from being flooded if the uTP protocol is used for any reason.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
1. Apply rate limit to transport overhead
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Apply rate limit to peers on LAN
!!! check ""
!!! success ""
**Suggested: `Enabled`**
------
@ -181,17 +181,17 @@ Not going to cover the technical part of what it does, but the following setting
1. These settings are mainly used for public trackers (and should be enabled for them) and not for private trackers, decent private trackers use a private flag where they ignore these settings.
!!! check ""
!!! success ""
**Suggested: `Personal preference`**
1. Recommended setting `Allow encryption` rather than enforcing it allows more peers to connect and is recommended on underpowered systems as it will allow for lower overhead.
!!! check ""
!!! success ""
**Suggested: `Allow encryption`**
1. Anonymous mode hides clients (qBittorrent) fingerprint from the peer-ID, sets the User-Agent to Null and it doesnt share your IP-address directly with trackers (though peers will still see your IP address). If using private trackers, it's recommended to `disable` this. I also got reports from people who are using this that they had worse speeds.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
### Torrent Queueing
@ -200,7 +200,7 @@ Not going to cover the technical part of what it does, but the following setting
These options allow you to control the number of active torrents being downloaded and uploaded.
!!! check ""
!!! success ""
**Suggested: `personal preference based on your setup and connection.`**
### Seeding Limits
@ -209,17 +209,17 @@ These options allow you to control the number of active torrents being downloade
1. Your maximum seeding ratio preference. (When both ratio and seeding time are enabled it will trigger the action on whatever happens first.)
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. Your maximum seeding time preference (When both ratio and seeding time are enabled it will trigger the action on whatever happens first.)
!!! check ""
!!! success ""
**Suggested: `Disabled`**
1. What to do when ratio or seeding time is reached.
!!! check ""
!!! success ""
**Suggested: `Paused and Disabled`**
!!! tip
@ -229,7 +229,7 @@ These options allow you to control the number of active torrents being downloade
![!Automatically add these trackers to new downloads](images/qb-options-bittorrent-automatically-add-these-trackers.png)
!!! check ""
!!! success ""
**Recommendation: `Disabled`**
!!! WARNING
@ -253,7 +253,7 @@ These options allow you to control the number of active torrents being downloade
1. In some cases when this is enabled it could result in issues.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
{! include-markdown "../../../includes/support.md" !}

@ -37,7 +37,7 @@ You don't need to add the full path under `Save Path`, it will use the root down
## Downloads do not go into the category folder
!!! attention "Downloads do not go into the category folder"
!!! warning "Downloads do not go into the category folder"
When your downloads ends up in `/data/torrents/` and not in `/data/torrents/{tv|movies|music}` then you probably forgot to change `Default Torrent Management Mode:` to `Automatic`

@ -4,7 +4,7 @@ When you make use of the unRaid cache drive for your `/data/torrents` share and
Using the following instructions you will be able to move the files with the use of the qBittorrent API.
!!! summary "Workflow Rules - [CLICK TO EXPAND]"
!!! abstract "Workflow Rules - [CLICK TO EXPAND]"
1. Pause torrents older than last x days.
1. Run the mover.
@ -14,7 +14,7 @@ Using the following instructions you will be able to move the files with the use
!!! Danger "If you make use of the Seed Time/Ratio settings in your Indexers settings in the Starr apps[^1].<br> Make sure you're using `Post-Import Category` in your Starr apps Download clients settings.<br>Else it could happen when the torrents get paused that they get removed by the Starr apps before the seeding goal is reached."
!!! attention
!!! warning
The screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -133,7 +133,7 @@ qbt_pass = None
- `qbt_user` => Your used qBittorrent `User Name` if you have authentication enabled. Add `'` either side.
- `qbt_pass` => Your used qBittorrent `Password` if you have authentication enabled. Add `'` either side.
!!! attention ""
!!! warning ""
Depending on whether you use the unRaid `Mover Tuning` app, You might need to change **line 68**:
- If you do not use `Mover Tuning`, change **line 68** from `os.system('/usr/local/sbin/mover.old start')` to `os.system('/usr/local/sbin/mover start')`

@ -6,7 +6,7 @@ You can use 3 options to check if you got working hardlinks.
*All methods require you to login to your terminal with PuTTY or similar software.*
!!! attention
!!! warning
You can't create hard links for directories :bangbang:
You can't cross file systems :bangbang:

@ -27,7 +27,7 @@ Then Continue to [How to setup for](/Hardlinks/How-to-setup-for/) your installat
### What are Hardlinks
??? faq "**What are hardlinks?** - [CLICK TO EXPAND]"
??? question "**What are hardlinks?** - [CLICK TO EXPAND]"
- [**Short answer**] Having a file in multiple locations without using double your storage space.
- [**Long answer**] Hard links are a way for a copy operation to be instant and not consume space for those additional copies.
@ -48,19 +48,19 @@ Then Continue to [How to setup for](/Hardlinks/How-to-setup-for/) your installat
[More info from Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Hard_link){:target="_blank" rel="noopener noreferrer"}
!!! attention
!!! warning
You can't create hard links for directories :bangbang:
You can't cross file systems :bangbang:
### What are Instant Moves (Atomic Moves)
??? faq "**What are Instant Moves (Atomic Moves)?** - [CLICK TO EXPAND]"
??? question "**What are Instant Moves (Atomic Moves)?** - [CLICK TO EXPAND]"
A real move and not a copy file from download folder to media folder and then delete file from download folder.
### What are the Starr Apps
??? faq "**What are the `Starr Apps`?** - [CLICK TO EXPAND]"
??? question "**What are the `Starr Apps`?** - [CLICK TO EXPAND]"
Sonarr, Radarr, Lidarr, etc.

@ -51,7 +51,7 @@ You need to install Docker from the `Package Center`. This should also create a
## Create the main share
!!! attention
!!! warning
To get Hardlinks and Atomic-Moves working with your Synology you will need to make use of **ONE** share with subfolders.
@ -130,7 +130,7 @@ Which in this screenshot is `1035` for the docker user
and the GID (aka PGID) which is `100` for the users group.
Remember these values for later use.
!!! attention
!!! warning
It is not recommended to use (anymore) your admin/main user account. That is why we just created a new user.
@ -264,7 +264,7 @@ Download this [.env](https://raw.githubusercontent.com/TRaSH-/Guides-Synology-Te
wget https://raw.githubusercontent.com/TRaSH-/Guides-Synology-Templates/main/docker-compose/.env -P /volume1/docker/appdata/
```
!!! attention
!!! warning
:bangbang: MAKE SURE THE FILE KEEPS THE ORIGINAL NAME `.env` WITH THE DOT BEFORE IT :bangbang:
------
@ -343,7 +343,7 @@ sudo chmod -R a=,a+rX,u+w,g+w /volume1/data /volume1/docker
## Run the Docker Compose
!!! important
!!! tip
make sure you delete/remove all your existing dockers from the Docker GUI and also remove your native installs (in Package Center) of these applications !!!
If you had previous installed apps, make a backup of their config folders.
@ -363,7 +363,7 @@ You will notice that all the images will be downloaded, after that the container
**Don't forget to look at the [Examples](/Hardlinks/Examples/) how to setup the paths inside your applications.**
!!! attention
!!! warning
If you need to do any changes, only edit the `docker-compose.yml` file. To activate the changes, run the command `sudo docker-compose up -d` again, from within the `/volume1/docker/appdata` folder.

@ -12,7 +12,7 @@
## Create the main share
!!! attention
!!! warning
To get Hardlinks and Atomic-Moves working with Unraid you will need to make use of <u>**ONE**</u> share with subfolders.

@ -26,7 +26,7 @@
Login to your [Client Area](https://torguard.net/clientarea.php){:target="_blank" rel="noopener noreferrer"}.
??? check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!Client Area Login](images/torguard/client-area-login.png)
### Create a user account
@ -36,14 +36,14 @@ This account will be used for authentication with your VPN Torrent client.
`Services` > `My Services` > `Manage` > `Manage Credentials`
??? Check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!Services > My Services](images/torguard/services-my-services.png)
![!Client Area Manage Credentials](images/torguard/client-area-manage-credentials.png)
Create a new username and choose a secure password or create a random username and password.
??? Check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!Create User Account](images/torguard/create_user_account.png)
------
@ -54,7 +54,7 @@ Now it's time to get the IP of your VPN server you're going to use from the [Glo
`Servers` > `Global VPN Network`
??? Check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!Servers > Global VPN Network](images/torguard/servers-globalvpnnetwork.png)
### Global VPN Network
@ -70,7 +70,7 @@ Let's use for this example: `USA Miami` and copy/paste the Hostname `us-fl.secur
![!Torguard Global VPN Network](images/torguard/globalvpnnetwork-list.png)
!!! important
!!! tip
Also check if your chosen server supports OpenVPN or Wireguard depending what you want to use.
### Get your VPN IP
@ -84,7 +84,7 @@ Open a cmd window or something equal and type:
You will then get the IP of the server.
Remember that for later use.
??? Check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!ping](images/torguard/cmd-ping.png)
------
@ -102,7 +102,7 @@ Then click on `Manage` and select `Port Forward Request`.
`Services` > `My Services` > `Manage` > `Port Forward Request`
??? Check "Example - [CLICK TO EXPAND]"
??? success "Example - [CLICK TO EXPAND]"
![!Port Forward Request](images/torguard/req_port_fwd.png)
### VPN Tunnel Type
@ -111,7 +111,7 @@ Choose your preferred VPN Tunnel type.
#### OVPN Request Port Forward
??? summary "OVPN Request Port Forward"
??? abstract "OVPN Request Port Forward"
![!Request New Port Forward OVPN](images/torguard/request-new-pfw-ovpn.png)
@ -135,7 +135,7 @@ Choose your preferred VPN Tunnel type.
#### WireGuard Request Port Forward
??? summary "WireGuard Request Port Forward - [CLICK TO EXPAND]"
??? abstract "WireGuard Request Port Forward - [CLICK TO EXPAND]"
![!Request New Port Forward WireGuard](images/torguard/request-new-pfw-wireguard.png)
@ -171,7 +171,7 @@ From your Client Area go to your [Config Generator](https://torguard.net/tgconf.
`Tools` > `Config Generator`
??? Check "Example Select Tools > Config Generator - [CLICK TO EXPAND]"
??? success "Example Select Tools > Config Generator - [CLICK TO EXPAND]"
![!Tools - Config Generator](images/torguard/tools-config-generator.png)
### Config Generator
@ -180,7 +180,7 @@ Choose your preferred VPN Tunnel type.
#### OVPN Config Generator
??? summary "OVPN Config Generator - [CLICK TO EXPAND]"
??? abstract "OVPN Config Generator - [CLICK TO EXPAND]"
![!OVPN Config Generator](images/torguard/config-generator-ovpn.png)
@ -200,7 +200,7 @@ Choose your preferred VPN Tunnel type.
#### WireGuard Config Generator
??? summary "WireGuard Config Generator - [CLICK TO EXPAND]"
??? abstract "WireGuard Config Generator - [CLICK TO EXPAND]"
![!WireGuard Config Generator](images/torguard/config-generator-wireguard.png)

@ -20,7 +20,7 @@ After setup it's fully automated and will check every X minutes for updates to t
Just enable the Custom Formats/Release Profiles you want.
??? check "Examples - [CLICK TO EXPAND]"
??? success "Examples - [CLICK TO EXPAND]"
Radarr Custom Formats Table
![!Notifiarr Custom Format Table](images/sync/notifiarr-cf-table.png)

@ -7,7 +7,7 @@ This is something that can't really be answered because it depends on the use ca
!!! danger ""
Here I will provide some suggestions and try to explain why I recommend these settings. Adjust it to your own liking and keep in mind that it is only a suggestion. I'm not a Plex Pro in anyway :bangbang:
!!! attention
!!! warning
Some settings are only visible for Plex Pass holders.
All changes need to be done on your Plex Media Server.
@ -53,7 +53,7 @@ The new agent settings are now managed “per library”.
When a change is detected in the source location for a librarys content, the appropriate library will be scanned. This function relies on the computers operating system providing the “something changed” trigger. Some operating systems dont provide this trigger and content mounted via a network will also typically not work. If your library doesnt automatically scan, you may have to set a periodical scan or do it manually.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
??? tip "TIP - Autoscan - [CLICK TO EXPAND]"
@ -70,7 +70,7 @@ When a change is detected in the source location for a librarys content, the
When changes to library folders are detected, only scan the folder which changed rather than scanning the entire content location. This works together with the normal Update my library automatically setting (and requires that setting to be enabled).
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Include music libraries in automatic updates
@ -85,7 +85,7 @@ I don't do music, so this choice is up to you, and I won't be covering it.
Turning this on will cause your Plex Media Server to run scans on your libraries using the designated interval.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Do you need a extra scan for your library to recognize new media?*
@ -96,7 +96,7 @@ Turning this on will cause your Plex Media Server to run scans on your libraries
With this option enabled, when an items file is deleted from the drive, it will be removed from the Plex library on the next scan. Disabling this option keeps the item in the library with an overlay over the items poster when the item is removed.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Allow media deletion
@ -105,7 +105,7 @@ With this option enabled, when an items file is deleted from the drive, it wi
The owner of the server will be allowed to delete media files from disk.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*In my opinion Plex shouldn't touch your media files. Use Sonarr/Radarr to manage your media library. (For extra security I've setup Plex with Read Only access to the media library)*
@ -116,7 +116,7 @@ The owner of the server will be allowed to delete media files from disk.
On low-powered systems (e.g. ARM-based NAS devices), it can be beneficial to run scanner tasks at a lower priority than other tasks. This can help ensure they do not interfere with regular streaming.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*Makes sure it uses less resources and ensure they do not interfere with regular streaming.*
@ -127,7 +127,7 @@ On low-powered systems (e.g. ARM-based NAS devices), it can be beneficial to run
This option creates a series of preview thumbnails from a media item when it is analyzed. These images are used by some Plex apps when you move back and forward in an app with the timeline scrubber. Theyll also be displayed in Now Playing when someone is streaming from you so that you can see where they are in the video.
!!! check ""
!!! success ""
**Suggested: `Never`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -147,7 +147,7 @@ This option creates a series of preview thumbnails from a media item when it is
You can choose to have TV episodes analyzed to try and detect when the “intro” occurs during playback. When detected, apps will then offer a `Skip Intro` button, allowing you to quickly jump over the intro.
!!! check ""
!!! success ""
**Suggested: `as a scheduled task`**
*or*
@ -160,7 +160,7 @@ You can choose to have TV episodes analyzed to try and detect when the “intro
Chapter thumbnails provide images in the chapter view on supported apps. They can take a little time to generate and consume very minor additional disk space.
!!! check ""
!!! success ""
**Suggested: `as a scheduled task`**
*or*
@ -177,7 +177,7 @@ Chapter thumbnails provide images in the chapter view on supported apps. They ca
Enable IPv6 support.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If you're not sure your network 100% works with ip6 <u>don't Enable it</u>.*
@ -188,7 +188,7 @@ Enable IPv6 support.
Choose how your Plex Media Server handles secure connections.
!!! check ""
!!! success ""
**Suggested: `Preferred`**
*Accept and prefer secure connections when theyre available for a Plex app, but allow regular HTTP connections if the app doesnt support secure connections or if one cant be established*
@ -199,10 +199,10 @@ Choose how your Plex Media Server handles secure connections.
For users with multiple network cards or systems such as NAS or Docker where there is always another network interface which Plex client applications may try to use to connect to the Plex Media Server, with this option you can ensure that your local Plex clients would only try that interface.
!!! attention
!!! warning
If you have enabled Remote Access enabled and are having Plex automatically map the port (as opposed to specifying a port manually), then Plex Media Server has no control over which network interface is used for an automatically-mapped port. Thus, its possible that Remote Access connections could come through an interface other than the one specified here.
!!! check ""
!!! success ""
**Suggested: `Whatever suits your setup`**
#### Strict TLS configuration
@ -211,7 +211,7 @@ For users with multiple network cards or systems such as NAS or Docker where the
If this setting is enabled, it prevents Plex Media Server from using or accepting the deprecated TLSv1.0 and v1.1 protocols, as well as legacy weak ciphers. May prevent older clients from connecting. The vast majority of users will have no reason to enable this option (and receive no benefit from doing so).
!!! check ""
!!! success ""
**Suggested: `Disabled`**
#### Enable local network discovery (GDM)
@ -220,7 +220,7 @@ If this setting is enabled, it prevents Plex Media Server from using or acceptin
Enable “GDay Mate” discovery. This is used to allows Plex apps and servers to find each other automatically on a local network.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Remote streams allowed per user
@ -229,7 +229,7 @@ Enable “GDay Mate” discovery. This is used to allows Plex apps and server
You can set the maximum number of simultaneous streams each remote user is allowed to have.
!!! check ""
!!! success ""
**Suggested: `Whatever suits your setup`**
#### LAN Networks
@ -238,7 +238,7 @@ You can set the maximum number of simultaneous streams each remote user is allow
It lets you specify which IP addresses or networks will be considered to be “local” to you.
!!! check ""
!!! success ""
**Suggested: `Your local IP/netmasks`**
*If your local devices are seen as remote devices, then this could solve your issue. (Do not include spaces or tabs.)*
@ -249,7 +249,7 @@ It lets you specify which IP addresses or networks will be considered to be “l
Allows incoming requests from this networks WAN IP address to be treated as LAN requests in terms of bandwidth. This often occurs when DNS rebinding protection is in place and clients on the LAN cannot contact the server directly but instead have to go through the WAN IP address.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Enable Relay
@ -258,7 +258,7 @@ Allows incoming requests from this networks WAN IP address to be treated as L
The Relay allows connections to the server through a proxy relay when the server is not accessible otherwise. Relay connections are bandwidth limited.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*I've seen several reports where people that had this Enabled had playback issues because it seems to be limited at 2 Mbps.*
@ -269,7 +269,7 @@ The Relay allows connections to the server through a proxy relay when the server
A comma-separated list of URLs (either HTTP or HTTPS), which will be published to plex.tv for server discovery. This can be very useful in a few cases: if youre using a reverse proxy in front of the media server, or if your networking configuration is otherwise unique. For instance, if you have your own custom domain with subdomain.
!!! check ""
!!! success ""
**Suggested: `Depending on your setup`**
*Example: `https://plex.mycustomdomain.com:32400`*
@ -290,7 +290,7 @@ This feature can be enabled to allow your server to send events to external serv
This will influence the quality used when transcoding media.
!!! check ""
!!! success ""
**Suggested: `Automatic`**
*Most users should leave it set to Automatic. Hardware-Accelerated Streaming is not affected by this setting.*
@ -301,7 +301,7 @@ This will influence the quality used when transcoding media.
Directory to use when transcoding temporary files for streaming.
!!! check ""
!!! success ""
**Suggested: `Depending on your setup, if possible, your RAM (disk)`**
*Speeds up transcoding and less I/O, transcode data is temporary and doesn't need to be writing to a disk.*
@ -319,7 +319,7 @@ Directory to use when transcoding temporary files for streaming.
This feature allows Plex Media Server to maintain high visual fidelity of content, by applying tone mapping to convert it to SDR when transcoding HDR content.
!!! check ""
!!! success ""
**Suggested: `Depending on your setup`**
*Most HDR content will be in 4K resolution. If your platform has to use software transcoding to perform the tone mapping, then it may well struggle convert 4K content in real-time, unless youre running on a very powerful system.*
@ -333,7 +333,7 @@ This feature allows Plex Media Server to maintain high visual fidelity of conten
To use Hardware-Accelerated Streaming in Plex Media Server.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
#### Use hardware-accelerated video encoding
@ -342,7 +342,7 @@ To use Hardware-Accelerated Streaming in Plex Media Server.
To use Hardware-Accelerated Encoding in Plex Media Server.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
------
@ -376,7 +376,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. The new version of the Plex Movie agent/scanner
!!! check ""
!!! success ""
**Suggested: `Plex Movie`**
*Besides being much faster at scanning and getting metadata, one of the benefits of the new agent is that all agent settings are set at the library level, so that different libraries using the same agent can have different agent settings.*
@ -385,7 +385,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, use local posters and artwork if present. (Local subtitles files will be used whether this is enabled or not)
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*I had this enabled because I thought it was needed for local subtitles (.srt), but after research it seems it isn't needed.
@ -393,7 +393,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, prefer embedded tags and local files if present.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If enabled you could end up with weird movie naming you don't want, happens especially from releases from `RARBG`*
@ -402,7 +402,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. Automatically create collections when there are more than the selected number of items for an available collection.
!!! check ""
!!! success ""
**Suggested: `2`**
*Only show collections when you have more than one item in your library*
@ -414,7 +414,7 @@ Here you will find your libraries you've added to your Plex Media Server.
!!! danger "ATTENTION"
Creating these images can <u>take a considerable amount of time</u>, <u>CPU resources</u>, and <u>increase the storage space used</u>. The images are stored in your Plex database so <u>be careful you dont fill the drive :bangbang:</u>
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -422,7 +422,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. This deletes the preview thumbnails it generated before you disabled this option
1. If you want to show your Collection in your library
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*When Disabled your movies will show up normally when you use library view, This doesn't mean it will disable the collection view.*
@ -433,7 +433,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. The new version of the Plex Movie agent/scanner
!!! check ""
!!! success ""
**Suggested: `Plex TV Series`**
*Besides being much faster at scanning and getting metadata, one of the benefits of the new agent is that all agent settings are set at the library level, so that different libraries using the same agent can have different agent settings.*
@ -444,7 +444,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. Use season titles when available.
1. When scanning this library, use local posters and artwork if present. (Local subtitles files will be used whether this is enabled or not)
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*I had this enabled because I thought it was needed for local subtitles (.srt), but after research it seems it isn't needed.
@ -454,7 +454,7 @@ Here you will find your libraries you've added to your Plex Media Server.
1. When scanning this library, prefer embedded tags and local files if present.
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*If enabled you could end up with weird movie naming you don't want, happens especially from releases from `RARBG`*
@ -466,7 +466,7 @@ Here you will find your libraries you've added to your Plex Media Server.
!!! danger "ATTENTION"
Creating these images can <u>take a considerable amount of time</u>, <u>CPU resources</u>, and <u>increase the storage space used</u>. The images are stored in your Plex database so <u>be careful you dont fill the drive :bangbang:</u>
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*Besides that, it uses a lot of disk space and high I/O, No one in my family uses FastForward/Rewind but they use the skip forward/backward.*
@ -474,14 +474,14 @@ Here you will find your libraries you've added to your Plex Media Server.
1. This deletes the preview thumbnails it generated before you disabled this option
1. If you want to show your Collection in your library
!!! check ""
!!! success ""
**Suggested: `Disabled`**
*When Disabled your tv show will show up normally when you use library view, This doesn't mean it will disable the collection view.*
1. Generate intro detection for items in this library when enabled in server settings.
!!! check ""
!!! success ""
**Suggested: `Enabled`**
*Ever watch a TV show and it starts playing that same minute and a half credits intro that you've already watched multiple times? Well, you can have your Plex Media Server analyze the TV shows to try and detect those introductions and then let you skip through them with a single click!*

@ -5,7 +5,7 @@ Well, it's actually personal preference so I will show you my recommendations.
But before you continue to read, as with all my guides:
!!! error ""
!!! danger ""
**If you don't care about quality then stop reading and see if the other tutorials are helpful for you.**
These Quality Settings have been created and tested with info I got from others, and release comparisons from different sources.

File diff suppressed because it is too large Load Diff

@ -30,7 +30,7 @@ After selecting the `Import` button you will get a screen that has all the Custo
![cf-import-done](images/cf-import-done.png)
!!! attention "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
!!! warning "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
### TRaSH Sync

@ -17,7 +17,7 @@ The Tokens not available in the release won't be used/shown.
This naming scheme is made to be compatible with the [New Plex Agent](https://forums.plex.tv/t/new-plex-media-server-movie-scanner-and-agent-preview/593269/517) that now supports IMDb and TMDb IDs in filenames, if you don't need it or want it just remove `{imdb-{ImdbId}}`
!!! caution "Starting from v4.2.2.6489, Radarr now supports Plex Multiple Edition tags in naming."
!!! warning "Starting from v4.2.2.6489, Radarr now supports Plex Multiple Edition tags in naming."
If you're using a lower version or don't need it replace:
@ -27,7 +27,7 @@ This naming scheme is made to be compatible with the [New Plex Agent](https://fo
{{ radarr['naming']['radarr-naming']['file']['default'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
`The Movie Title (2010) {imdb-tt0066921} {edition-Ultimate Extended Edition} [IMAX HYBRID][Bluray-1080p Proper][3D][DV HDR10][DTS 5.1][x264]-EVOLVE`
@ -37,7 +37,7 @@ For Jellyfin/Emby:
{{ radarr['naming']['radarr-naming']['file']['emby'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
`The Movie Title (2010) [imdbid-tt0066921] {edition-Ultimate Extended Edition} [IMAX HYBRID][Bluray-1080p Proper][3D][DV HDR10][DTS 5.1][x264]-EVOLVE`
@ -47,7 +47,7 @@ If you do Anime
{{ radarr['naming']['radarr-naming']['file']['anime'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
`The Movie Title (2010) {imdb-tt0066921} {edition-Ultimate Extended Edition} [Surround Sound x264][Bluray-1080p Proper][3D][DTS 5.1][DE][10bit][AVC]-EVOLVE`
@ -57,7 +57,7 @@ For Jellyfin/Emby:
{{ radarr['naming']['radarr-naming']['file']['anime-emby'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
`The Movie Title (2010) [imdbid-tt0066921] {edition-Ultimate Extended Edition} [Surround Sound x264][Bluray-1080p Proper][3D][DTS 5.1][DE][10bit][AVC]-EVOLVE`

@ -149,7 +149,7 @@ Add the following json to your Radarr/Sonarr with a score of `10`.
### What's reverse scoring
??? FAQ "What's reverse scoring? - [CLICK TO EXPAND]"
??? question "What's reverse scoring? - [CLICK TO EXPAND]"
With reverse scoring you add a Custom Format with a score of `-10000` and your preferred condition you negate.
@ -157,7 +157,7 @@ Add the following json to your Radarr/Sonarr with a score of `10`.
### Prefer language X over language Y
??? FAQ "Prefer language X over language Y - [CLICK TO EXPAND]"
??? question "Prefer language X over language Y - [CLICK TO EXPAND]"
If you want to prefer Prefer language X over language Y,
@ -167,13 +167,13 @@ Add the following json to your Radarr/Sonarr with a score of `10`.
### What's Original Language
??? FAQ "What's Original Language? - [CLICK TO EXPAND]"
??? question "What's Original Language? - [CLICK TO EXPAND]"
Original Language is the language in which a Movie/TV Show was originally made.
### Where does Radarr get the Original Language from
??? FAQ "Where does Radarr get the Original Language from? - [CLICK TO EXPAND]"
??? question "Where does Radarr get the Original Language from? - [CLICK TO EXPAND]"
Radarr makes use of [The Movie Database (TMDB)](https://www.themoviedb.org/){:target="_blank" rel="noopener noreferrer"}.
@ -181,7 +181,7 @@ Add the following json to your Radarr/Sonarr with a score of `10`.
### Where does Sonarr get the Original Language from
??? FAQ "Where does Sonarr get the Original Language from? - [CLICK TO EXPAND]"
??? question "Where does Sonarr get the Original Language from? - [CLICK TO EXPAND]"
Sonarr makes use of [TheTVDB](https://thetvdb.com/){:target="_blank" rel="noopener noreferrer"}.

@ -7,7 +7,7 @@ I'm going to show two different options on how you can setup your sync with two
- Option 1: This option is best used if you want a 1:1 copy of your Radarr/Sonarr instances as it'll sync everything
- Option 2: This option is best used if you only want to have a subset of your library Movies/TV Shows as 4K/2160p (UHD) as it filters by quality profile
!!! error ""
!!! bug ""
I'm not going to explain how to set up two Radarr/Sonarr instances for your system, being it depends on how you have it installed/running. [Radarr Multiple Instance Information](https://wiki.servarr.com/radarr/installation#multiple-instances) and [Sonarr Multiple Instance Information](https://wiki.servarr.com/sonarr/installation#multiple-instances)
## Preparation
@ -18,7 +18,7 @@ For this you need to have prepared the following:
- One download client (*Two if you prefer Usenet and Torrents*).
- Your download client has two separate categories (movies-hd, movies-uhd, tv-hd, tv-uhd, etc)
!!! attention
!!! warning
:bangbang:You can't use the same root (media library) folder for both Radarr's/Sonarr's:bangbang:
@ -78,7 +78,7 @@ Select your preferred download client.
The only thing you need to change/create is a separate `Category` that you're going to use for `Radarr 2`
!!! attention
!!! warning
This can't and shouldn't be the same category you use for `Radarr 1` but a separate `Category`.
@ -149,7 +149,7 @@ Select your preferred download client.
Only thing you need to change/create is a separate `Category` that you're going to use for `Sonarr 2`
!!! important
!!! tip
This can't and shouldn't be the same category you use for `Sonarr 1` but a separate `Category`.

@ -31,7 +31,7 @@ It is quite important that you follow and understand what is envisioned by Trash
The only change that is needed and **mandatory** for French Custom Formats to work is to set the preferred language profile for your releases to `Any`.
??? check "Screenshot example - [CLICK TO EXPAND]"
??? success "Screenshot example - [CLICK TO EXPAND]"
![!cf-quality-profile-cf](images/french-cf-profile-language.png)
!!! info
@ -124,13 +124,13 @@ Use the following main settings in your profile.
![HD Bluray + WEB](images/french-qp-bluray-webdl.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
The reason why WEB-DL 720p is not selected is because you will hardly find any releases that aren't done as 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-1080p is released it will download the WEB-1080p. (streaming services)
- When the Bluray-1080p is released it will upgrade to the Bluray-1080p.
@ -164,11 +164,11 @@ Use the following main settings in your profile.
![UHD Bluray + WEB](images/french-qp-uhd-bluray-webdl.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
**Depending what's released first and available the following Workflow Logic will be used:**
@ -202,13 +202,13 @@ Use the following main settings in your profile.
![Remux + WEB 1080p](images/french-qp-remux-webdl-1080p.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
The reason why I didn't select the WEB-DL 720p is because you will hardly find any releases that aren't done as 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-1080p is released it will download the WEB-1080p. (streaming services)
- When the REMUX-1080p is released it will upgrade to the REMUX-1080p.
@ -242,11 +242,11 @@ Use the following main settings in your profile.
![Remux + WEB 2160p](images/french-qp-remux-webdl-2160p.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-2160p is released it will download the WEB-2160p. (streaming services)
- When the REMUX-2160p is released it will upgrade to the REMUX-2160p.

@ -27,7 +27,7 @@ Il est impératif que vous respectiez et compreniez ce qui est proposé par le g
La seule modification nécessaire et **indispensable** pour que les formats personnalisés français fonctionnent est de définir le profil de langue sur `Any`.
??? check "Exemple - [CLIQUEZ POUR AFFICHER]"
??? success "Exemple - [CLIQUEZ POUR AFFICHER]"
![!cf-quality-profile-cf](images/french-cf-profile-language.png)
!!! info
@ -119,13 +119,13 @@ Utilisez les paramètres suivants dans votre profil.
![HD Bluray + WEB](images/french-qp-bluray-webdl.png)
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
La raison pour laquelle le WEB-DL 720p n'est pas sélectionné est que vous ne trouverez pratiquement aucune release qui ne soit pas faite en 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -161,11 +161,11 @@ Utilisez les paramètres suivants dans votre profil.
![UHD Bluray + WEB](images/french-qp-uhd-bluray-webdl.png)
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -199,13 +199,13 @@ Utilisez les paramètres suivants dans votre profil.
![Remux + WEB 1080p](images/french-qp-remux-webdl-1080p.png)
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
La raison pour laquelle le WEB-DL 720p n'est pas sélectionné est que vous ne trouverez pratiquement aucune release qui ne soit pas faite en 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -241,11 +241,11 @@ Utilisez les paramètres suivants dans votre profil.
![Remux + WEB 2160p](images/french-qp-remux-webdl-2160p.png)
!!! attention "Assurez-vous de ne pas cocher le BR-DISK."
!!! warning "Assurez-vous de ne pas cocher le BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
- Lorsque le WEB-2160p deviendra disponible, le média sera télécharger en WEB-2160p. (services de streaming)
- Lorsque le REMUX-2160p sortira, il sera mis à niveau vers le REMUX-2160p.

@ -38,10 +38,10 @@ Select the profile that you want to use/prefer.
At the bottom in your chosen profile you will see the added Custom Formats where you can start setting up the scores.
??? check "Screenshot example - [CLICK TO EXPAND]"
??? success "Screenshot example - [CLICK TO EXPAND]"
![!cf-quality-profile-cf](images/cf-quality-profile-cf.png)
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -65,7 +65,7 @@ At the bottom in your chosen profile you will see the added Custom Formats where
## Which Quality Profile should you choose
??? summary "Which Quality Profile should you choose - [CLICK TO EXPAND]"
??? abstract "Which Quality Profile should you choose - [CLICK TO EXPAND]"
<p align="center">*Click on the image below to see how to make use of the flowchart.*
@ -105,13 +105,13 @@ Use the following main settings in your profile.
![HD Bluray + WEB](images/qp-bluray-webdl.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
The reason why I didn't select the WEB-DL 720p is because you will hardly find any releases that aren't done as 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-1080p is released it will download the WEB-1080p. (streaming services)
- When the Bluray-1080p is released it will upgrade to the Bluray-1080p.
@ -151,11 +151,11 @@ Use the following main settings in your profile.
![UHD Bluray + WEB](images/qp-uhd-bluray-webdl.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
**Depending what's released first and available the following Workflow Logic will be used:**
@ -193,13 +193,13 @@ Use the following main settings in your profile.
![Remux + WEB 1080p](images/qp-remux-webdl-1080p.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
The reason why I didn't select the WEB-DL 720p is because you will hardly find any releases that aren't done as 1080p WEB-DL.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-1080p is released it will download the WEB-1080p. (streaming services)
- When the REMUX-1080p is released it will upgrade to the REMUX-1080p.
@ -239,11 +239,11 @@ Use the following main settings in your profile.
![Remux + WEB 2160p](images/qp-remux-webdl-2160p.png)
!!! attention "Make sure you don't check the BR-DISK."
!!! warning "Make sure you don't check the BR-DISK."
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- When the WEB-2160p is released it will download the WEB-2160p. (streaming services)
- When the REMUX-2160p is released it will upgrade to the REMUX-2160p.
@ -319,7 +319,7 @@ Use the following main settings in your profile.
### Custom Formats to avoid certain releases
??? FAQ "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
??? question "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
For Custom Formats you really want to avoid, set it to something really low like `-10000` and not something like `-10`.
Being when you add a Custom Format what you prefer and you set it to something like `+10` it could happen that for example the `BR-DISK` will be downloaded (-10)+(+10)=0 and if your `Minimum Custom Format Score` is set at `0`.
@ -332,7 +332,7 @@ This is a must have for every Quality Profile you use in my opinion. All these C
### Custom Formats with a score of 0
??? FAQ "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
??? question "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
All Custom Formats with a score of 0 are pure informational and don't do anything.

@ -2,7 +2,7 @@
The Special Quality Profiles are Custom made and tested Quality Profile for specific needs or preferences.
!!! attention
!!! warning
- Anything here is for private use only and not for public use. :bangbang:
- I expect from the users that got the link to this page to honour it. :bangbang:
@ -24,13 +24,13 @@ The Special Quality Profiles are Custom made and tested Quality Profile for spec
**CF** = Custom Formats
??? FAQ "Why don't you add this to the public guide? - [CLICK TO EXPAND]"
??? question "Why don't you add this to the public guide? - [CLICK TO EXPAND]"
These SQPs are advanced Quality Profiles tested and created for a specific need, and only interesting for people that are interested in a specific Quality Profile.
??? FAQ "I see CFs that aren't in the main guide - [CLICK TO EXPAND]"
??? question "I see CFs that aren't in the main guide - [CLICK TO EXPAND]"
Some SQPs have/need specific CFs to work.
??? FAQ "Some CFs in your instructions have a score of 0. Should I follow the scores from the main guide? - [CLICK TO EXPAND]"
??? question "Some CFs in your instructions have a score of 0. Should I follow the scores from the main guide? - [CLICK TO EXPAND]"
No, you should always follow the scores of the SQP.
!!! TIP

@ -5,7 +5,7 @@ Well, it's actually personal preference so I will show you my recommendations.
But before you continue to read, as with all my guides:
!!! error ""
!!! danger ""
**If you don't care about quality then stop reading and see if the other tutorials are helpful for you.**
These Quality Settings have been created and tested with info I got from others, and release comparisons from different sources.

@ -72,7 +72,7 @@ Has all necessary information and a little extra if you needed to rebuild.
{Series TitleYear} - S{season:00}E{episode:00} - {absolute:000} - {Episode CleanTitle} [{Preferred Words }{Quality Full}]{[MediaInfo VideoDynamicRange]}[{MediaInfo VideoBitDepth}bit]{[MediaInfo VideoCodec]}[{Mediainfo AudioCodec} { Mediainfo AudioChannels}]{MediaInfo AudioLanguages}{-Release Group}
```
??? summary "RESULTS:"
??? abstract "RESULTS:"
Single Episode:
@ -159,7 +159,7 @@ We need to add the Anime Categories to our indexers otherwise this all won't wor
### First Release Profile
<!-- [trash_id: 31f4dd7b08bc8a43099eed604fd8acf6] -->
!!! important
!!! tip
**DO** Check mark `Include Preferred when Renaming` on this release profile.
![!rpa-release-sources-1](images/rpa-release-sources-1.png)
@ -207,7 +207,7 @@ If you would like it to be priority then set to **100**. If you do not want unce
The reason most of these are added is due to their shitty quality or just in general are not as good as other stuff that is out there. This can be tweaked as needed. Let me know if you run into any issues here. You should be able to just copy paste these in one go. If there is a reason something shouldn't be here let me know and your logic and I will be open to adjusting.
!!! important
!!! tip
If you would like `dub` releases then remove the last 2 lines and do not add them.
@ -250,7 +250,7 @@ Add this to your Preferred with a score of **[501]**
---
!!! important
!!! tip
These next few are optional, but they are here to move releases up over lower tiers of `1080/720p` or `WEB-DL/Blu-Ray`. Will add another note like this to end the optional section.
---
@ -288,7 +288,7 @@ Add this to your Preferred with a score of **[5]**
/\b(?:(1080p|1920x1080|1440p|FHD|1080i|4kto1080p))\b/i
```
!!! important
!!! tip
This is the end of the optional section.
Add this to your Preferred with a score of **[4000]**

@ -5,7 +5,7 @@ With this option you can fine tune your preference.
The Release profile that we're going to use for this example is mainly to prefer P2P releases over Scene releases. (Scene releases are still being downloaded, but replaced once an upgrade is found.)
!!! error ""
!!! danger ""
**If you don't care about quality then stop reading and see if the other tutorials are helpful for you.**
??? question "FAQ - [CLICK TO EXPAND]"
@ -100,13 +100,13 @@ You will get a popup screen that will look like this:
------
!!! summary
!!! abstract
The Number between the **[**brackets**]** in the following release profiles are the scores the release name will get during an automatic and manual search and with the use of the scores some releases will be preferred over others and even upgraded.
The Number between **(**brackets**)** in the following release profiles are referring to the location where you should add this regex in the release profile corresponding the screenshot above.
!!! important
!!! tip
We're going to make use of four separate release profiles.
------
@ -203,7 +203,7 @@ Add this to your `Preferred (3)` with a score of [75]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -271,7 +271,7 @@ Add this to your `Preferred (3)` with a score of [10]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -303,7 +303,7 @@ Add this to your `Preferred (3)` with a score of [-100]
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).
@ -331,7 +331,7 @@ Add this to your `Preferred (3)` with a score of [-100]
### Golden rule
!!! attention ""
!!! warning ""
:bangbang: This one is actually a must even that it's added in the optional section :bangbang:
??? question "Why the Must Not Contain entry - [CLICK TO EXPAND]"
@ -580,7 +580,7 @@ When you've done it correctly it will look something like this.
??? success "example - [CLICK TO EXPAND]"
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide (with the copy paste/option at the end).

@ -25,7 +25,7 @@ it gets imported correctly and isn't incorrectly matched as HDTV or WEB-DL etc.
{{ sonarr['naming']['sonarr-naming']['episodes']['standard']['default:4'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
Single Episode:
@ -49,7 +49,7 @@ it gets imported correctly and isn't incorrectly matched as HDTV or WEB-DL etc.
{{ sonarr['naming']['sonarr-naming']['episodes']['daily']['default:4'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
`The Series Title! (2010) - 2013-10-30 - Episode Title 1 [AMZN WEBDL-1080p Proper][DV HDR10][DTS 5.1][x264]-RlsGrp`
@ -67,7 +67,7 @@ it gets imported correctly and isn't incorrectly matched as HDTV or WEB-DL etc.
{{ sonarr['naming']['sonarr-naming']['episodes']['anime']['default:4'] }}
```
??? summary "RESULTS: - [CLICK TO EXPAND]"
??? abstract "RESULTS: - [CLICK TO EXPAND]"
Single Episode:

@ -103,7 +103,7 @@ I also made 3 guides related to this one.
### TrueHD ATMOS
??? faq "TrueHD ATMOS - [CLICK TO EXPAND]"
??? question "TrueHD ATMOS - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Atmos){:target="_blank" rel="noopener noreferrer"}
@ -121,7 +121,7 @@ I also made 3 guides related to this one.
### DTS X
??? faq "DTS X - [CLICK TO EXPAND]"
??? question "DTS X - [CLICK TO EXPAND]"
DTS:X is an object-based audio codec, which aims to create a multi-dimensional sound that “moves around you like it would in real life”
@ -137,7 +137,7 @@ I also made 3 guides related to this one.
### ATMOS (undefined)
??? faq "ATMOS (undefined) - [CLICK TO EXPAND]"
??? question "ATMOS (undefined) - [CLICK TO EXPAND]"
Handles cases where only Atmos is specified in title but not DD+ or TrueHD (Where it is not specified if it is Lossy or Lossless)
@ -158,7 +158,7 @@ I also made 3 guides related to this one.
<sub>DDPlus = DD+</sub>
??? faq "DD+ ATMOS - [CLICK TO EXPAND]"
??? question "DD+ ATMOS - [CLICK TO EXPAND]"
Atmos via UHD Blu-ray will be lossless, or lossy via streaming services so in this case it will be lossy + Atmos
@ -174,7 +174,7 @@ I also made 3 guides related to this one.
### TrueHD
??? faq "TrueHD - [CLICK TO EXPAND]"
??? question "TrueHD - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_TrueHD){:target="_blank" rel="noopener noreferrer"}
@ -192,7 +192,7 @@ I also made 3 guides related to this one.
### DTS-HD MA
??? faq "DTS-HD MA - [CLICK TO EXPAND]"
??? question "DTS-HD MA - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/DTS-HD_Master_Audio){:target="_blank" rel="noopener noreferrer"}
@ -210,7 +210,7 @@ I also made 3 guides related to this one.
### FLAC
??? faq "FLAC - [CLICK TO EXPAND]"
??? question "FLAC - [CLICK TO EXPAND]"
FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless, meaning that audio is compressed in FLAC without any loss in quality. This is similar to how Zip works, except with FLAC you will get much better compression because it is designed specifically for audio
@ -226,7 +226,7 @@ I also made 3 guides related to this one.
### PCM
??? faq "PCM - [CLICK TO EXPAND]"
??? question "PCM - [CLICK TO EXPAND]"
PCM is the method of encoding typically used for uncompressed digital audio
@ -242,7 +242,7 @@ I also made 3 guides related to this one.
### DTS-HD HRA
??? faq "DTS-HD HRA - [CLICK TO EXPAND]"
??? question "DTS-HD HRA - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -259,7 +259,7 @@ I also made 3 guides related to this one.
<sub>Dolby Digital Plus = DD+ = DDPlus</sub>
??? faq "DD+ - [CLICK TO EXPAND]"
??? question "DD+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Digital_Plus){:target="_blank" rel="noopener noreferrer"}
@ -277,7 +277,7 @@ I also made 3 guides related to this one.
### DTS-ES
??? faq "DTS-ES - [CLICK TO EXPAND]"
??? question "DTS-ES - [CLICK TO EXPAND]"
DTS-ES (DTS Extended Surround) includes two variants, DTS-ES Discrete 6.1, and DTS-ES Matrix 5.1, depending on how the sound was originally mastered and stored.
@ -295,7 +295,7 @@ I also made 3 guides related to this one.
<sub>DTS = Basic DTS</sub>
??? faq "DTS - [CLICK TO EXPAND]"
??? question "DTS - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -310,7 +310,7 @@ I also made 3 guides related to this one.
### AAC
??? faq "AAC - [CLICK TO EXPAND]"
??? question "AAC - [CLICK TO EXPAND]"
Advanced Audio Coding
@ -331,7 +331,7 @@ I also made 3 guides related to this one.
<sub>(Basic) Dolby Digital = DD</sub>
??? faq "DD - [CLICK TO EXPAND]"
??? question "DD - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Dolby_Digital){:target="_blank" rel="noopener noreferrer"}
@ -349,7 +349,7 @@ I also made 3 guides related to this one.
### MP3
??? faq "MP3 - [CLICK TO EXPAND]"
??? question "MP3 - [CLICK TO EXPAND]"
Description placeholder
??? example "JSON - [CLICK TO EXPAND]"
@ -364,7 +364,7 @@ I also made 3 guides related to this one.
### Opus
??? faq "Opus - [CLICK TO EXPAND]"
??? question "Opus - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Opus_(audio_format)){:target="_blank" rel="noopener noreferrer"}
@ -488,7 +488,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV HDR10 - [CLICK TO EXPAND]"
??? question "DV HDR10 - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -508,7 +508,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV - [CLICK TO EXPAND]"
??? question "DV - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -528,7 +528,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV HLG - [CLICK TO EXPAND]"
??? question "DV HLG - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -548,7 +548,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV SDR - [CLICK TO EXPAND]"
??? question "DV SDR - [CLICK TO EXPAND]"
Dolby Vision is a content mastering and delivery format similar to the HDR10 media profile.
@ -568,7 +568,7 @@ I also made 3 guides related to this one.
<sub>HDR10Plus = HDR10+</sub>
??? faq "HDR10+ - [CLICK TO EXPAND]"
??? question "HDR10+ - [CLICK TO EXPAND]"
**HDR10+ enhances upon a pre-existing HDR10 base layer allowing backwards compatibility with HDR10 devices. It adds dynamic metadata for the devices that support it.**
@ -590,7 +590,7 @@ I also made 3 guides related to this one.
<sub>HDR10</sub>
??? faq "HDR10 - [CLICK TO EXPAND]"
??? question "HDR10 - [CLICK TO EXPAND]"
**HDR10 is the most basic HDR format used in consumer media and is supported by all HDR-supported devices. It adds static metadata upon the PQ10 format.**
@ -614,7 +614,7 @@ I also made 3 guides related to this one.
<sub>HDR</sub>
??? faq "HDR - [CLICK TO EXPAND]"
??? question "HDR - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.m.wikipedia.org/wiki/High-dynamic-range_video){:target="_blank" rel="noopener noreferrer"}
@ -632,7 +632,7 @@ I also made 3 guides related to this one.
### HDR (undefined)
??? faq "HDR (undefined) - [CLICK TO EXPAND]"
??? question "HDR (undefined) - [CLICK TO EXPAND]"
Some groups don't add HDR to their 4K release name so I suggest to add this Custom Format at the same score as you add one of your HDR Custom Formats.
@ -652,7 +652,7 @@ I also made 3 guides related to this one.
<sub>PQ = PQ10</sub>
??? faq "PQ - [CLICK TO EXPAND]"
??? question "PQ - [CLICK TO EXPAND]"
**PQ10 is the most basic HDR format which all other common formats are based upon. It is the barebones SMPTE 2084 specification and has no metadata.**
@ -674,7 +674,7 @@ I also made 3 guides related to this one.
<sub>HLG = HLG10</sub>
??? faq "HLG - [CLICK TO EXPAND]"
??? question "HLG - [CLICK TO EXPAND]"
**HLG does not use dynamic metadata and is backwards compatible with SDR devices. It is mostly used in broadcasting.**
@ -698,7 +698,7 @@ I also made 3 guides related to this one.
### Hybrid
??? faq "Hybrid - [CLICK TO EXPAND]"
??? question "Hybrid - [CLICK TO EXPAND]"
A hybrid release means any combination of sources (video + audio) and not a direct encode of a single source. Generally you can be sure that any hybrid that has been put together is the best quality release of a particular title.
@ -714,7 +714,7 @@ I also made 3 guides related to this one.
### Remaster
??? faq "Remaster - [CLICK TO EXPAND]"
??? question "Remaster - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Remaster){:target="_blank" rel="noopener noreferrer"}
@ -737,7 +737,7 @@ I also made 3 guides related to this one.
### BR-DISK
??? faq "BR-DISK - [CLICK TO EXPAND]"
??? question "BR-DISK - [CLICK TO EXPAND]"
This is a custom format to help Sonarr recognize & ignore BR-DISK (ISO's and Blu-ray folder structure) in addition to the standard BR-DISK quality.
@ -767,7 +767,7 @@ I also made 3 guides related to this one.
<sub>Low Quality Releases = LQ</sub>
??? faq "LQ - [CLICK TO EXPAND]"
??? question "LQ - [CLICK TO EXPAND]"
A collection of known Low Quality groups that are often banned from the the top trackers because their lack of quality.
@ -785,13 +785,13 @@ I also made 3 guides related to this one.
<sub>720/1080p no x265 = x265 (720/1080p) = x265 (HD)</sub>
??? faq "x265 (HD) - [CLICK TO EXPAND]"
??? question "x265 (HD) - [CLICK TO EXPAND]"
This blocks/ignores 720/1080p(HD) releases that are encoded in x265
In your quality profile use the following score for this Custom Format: `{{ sonarr['cf']['x265-hd']['trash_score'] }}`
!!! fail ""
!!! failure ""
--8<-- "includes/docker/x265.md"
!!! Danger "Don't use this together with [{{ sonarr['cf']['x265-no-hdrdv']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#x265-no-hdrdv), Only ever include one of them :warning:"
@ -848,7 +848,7 @@ I also made 3 guides related to this one.
### x264
??? faq "x264 - [CLICK TO EXPAND]"
??? question "x264 - [CLICK TO EXPAND]"
x264 is a *free software library* and *application* for encoding video streams into the [H.264/MPEG-4 AVC](https://en.wikipedia.org/wiki/H.264){:target="_blank" rel="noopener noreferrer"} compression format, and is released under the terms of the [GNU GPL](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html){:target="_blank" rel="noopener noreferrer"}.
@ -866,11 +866,11 @@ I also made 3 guides related to this one.
### x265
??? faq "x265 - [CLICK TO EXPAND]"
??? question "x265 - [CLICK TO EXPAND]"
x265 is a *free software library* and *application* for encoding video streams into the [H.265/MPEG-H HEVC](http://en.wikipedia.org/wiki/H.265){:target="_blank" rel="noopener noreferrer"} compression format, and is released under the terms of the [GNU GPL](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html){:target="_blank" rel="noopener noreferrer"}.
!!! fail ""
!!! failure ""
Please don't forget to read the following [Microsized & Wrong Source](#microsized-wrong-source)
??? example "JSON - [CLICK TO EXPAND]"
@ -913,7 +913,7 @@ I also made 3 guides related to this one.
### Bad Dual Groups
??? faq "Bad dual groups - [CLICK TO EXPAND]"
??? question "Bad dual groups - [CLICK TO EXPAND]"
These groups take the original release, then they add their own preferred language (ex. Portuguese) as the main audio track (AAC 2.0), What results after renaming and FFprobe that the media file will be recognized as Portuguese AAC audio. It's a common rule that you add the best audio as first.
Also they often even rename the release name in to Portuguese.
@ -931,7 +931,7 @@ I also made 3 guides related to this one.
<sub>Dolby Vision = DoVi = DV</sub>
??? faq "DV (WEBDL) - [CLICK TO EXPAND]"
??? question "DV (WEBDL) - [CLICK TO EXPAND]"
This is a special Custom Format that block WEBDLs **with** Dolby Vision but **without** HDR10 fallback.
You will need to add the following to your new Custom Format when created in your Quality Profile (`Setting` => `Profiles`) and then set the score to `-1000` or even `-10000`
@ -954,7 +954,7 @@ I also made 3 guides related to this one.
### HDR10Plus Boost
??? faq "HDR10+ Boost - [CLICK TO EXPAND]"
??? question "HDR10+ Boost - [CLICK TO EXPAND]"
Optional (use this one only if you have a (Samsung) TV that supports HDR10+ and you don't have a Setup that supports DV or you prefer HDR10+.
@ -970,7 +970,7 @@ I also made 3 guides related to this one.
### No-RlsGroup
??? faq "No-RlsGroup - [CLICK TO EXPAND]"
??? question "No-RlsGroup - [CLICK TO EXPAND]"
Some indexers strip out the release group which could result in LQ groups getting a higher score.
For example a lot of EVO releases end up stripping the group name, so they appear as "upgrades", and they end up getting a decent score if other things match
@ -991,7 +991,7 @@ I also made 3 guides related to this one.
### Obfuscated
??? faq "Obfuscated - [CLICK TO EXPAND]"
??? question "Obfuscated - [CLICK TO EXPAND]"
Optional (use these only if you dislike renamed releases)
@ -1007,7 +1007,7 @@ I also made 3 guides related to this one.
### Retags
??? faq "Retags - [CLICK TO EXPAND]"
??? question "Retags - [CLICK TO EXPAND]"
Optional (use these only if you dislike retagged releases)
@ -1023,7 +1023,7 @@ I also made 3 guides related to this one.
### Scene
??? faq "Scene - [CLICK TO EXPAND]"
??? question "Scene - [CLICK TO EXPAND]"
This Custom Format will try to recognize so called Scene releases, depending on your preferences you can give it a negative score `-10000` or a positive score or just don't add it all.
@ -1039,7 +1039,7 @@ I also made 3 guides related to this one.
### Season Pack
??? faq "Season Pack - [CLICK TO EXPAND]"
??? question "Season Pack - [CLICK TO EXPAND]"
This Custom Format can be used depending if you prefer or not prefer a season pack
@ -1064,7 +1064,7 @@ I also made 3 guides related to this one.
### x265 (no HDR/DV)
??? faq "x265 (no HDR/DV) - [CLICK TO EXPAND]"
??? question "x265 (no HDR/DV) - [CLICK TO EXPAND]"
This blocks/ignores 720/1080p (HD) releases that are encoded in x265.
@ -1088,7 +1088,7 @@ I also made 3 guides related to this one.
### AV1
??? faq "AV1 - [CLICK TO EXPAND]"
??? question "AV1 - [CLICK TO EXPAND]"
- This is a new codec and you need modern devices that support it.
- We also had reports of playback/transcoding issues.
@ -1107,7 +1107,7 @@ I also made 3 guides related to this one.
### SDR
??? faq "SDR - [CLICK TO EXPAND]"
??? question "SDR - [CLICK TO EXPAND]"
- This will help to prevent to grab UHD/4k releases without HDR Formats.
@ -1123,7 +1123,7 @@ I also made 3 guides related to this one.
### DV FEL
??? faq "DV (FEL) - [CLICK TO EXPAND]"
??? question "DV (FEL) - [CLICK TO EXPAND]"
- This will boost the score for Dolby Vision Releases using the original full quality Dolby Vision layer from the disc release to replace the old WEBDL HYBRID release.
@ -1143,7 +1143,7 @@ I also made 3 guides related to this one.
### Remux Tier 01
??? faq "Remux Tier 01 - [CLICK TO EXPAND]"
??? question "Remux Tier 01 - [CLICK TO EXPAND]"
- Groups doing remuxes with multiple sources(discs) mixing what's best.
@ -1159,7 +1159,7 @@ I also made 3 guides related to this one.
### Remux Tier 02
??? faq "Remux Tier 02 - [CLICK TO EXPAND]"
??? question "Remux Tier 02 - [CLICK TO EXPAND]"
- Groups that only use one source.(So called one disc wonders.)
- Groups that use an automated way.
@ -1177,7 +1177,7 @@ I also made 3 guides related to this one.
### HD Bluray Tier 01
??? faq "HD Bluray Tier 01 - [CLICK TO EXPAND]"
??? question "HD Bluray Tier 01 - [CLICK TO EXPAND]"
- Groups that created encodes from the remuxes without micro-sizing them.
@ -1193,7 +1193,7 @@ I also made 3 guides related to this one.
### HD Bluray Tier 02
??? faq "HD Bluray Tier 02 - [CLICK TO EXPAND]"
??? question "HD Bluray Tier 02 - [CLICK TO EXPAND]"
- Groups that created encodes from the remuxes without micro-sizing them.
@ -1207,7 +1207,7 @@ I also made 3 guides related to this one.
### WEB Tier 01
??? faq "WEB Tier 01 - [CLICK TO EXPAND]"
??? question "WEB Tier 01 - [CLICK TO EXPAND]"
- Groups that are on a certain list and active
- Groups that are on a certain list and did a minimum of x releases
@ -1226,7 +1226,7 @@ I also made 3 guides related to this one.
### WEB Tier 02
??? faq "WEB Tier 02 - [CLICK TO EXPAND]"
??? question "WEB Tier 02 - [CLICK TO EXPAND]"
- Groups that are on a certain list and are less or not active anymore
- Groups that only did a few releases
@ -1244,7 +1244,7 @@ I also made 3 guides related to this one.
### WEB Tier 03
??? faq "WEB Tier 03 - [CLICK TO EXPAND]"
??? question "WEB Tier 03 - [CLICK TO EXPAND]"
- Groups that are on a certain list and are less or not active anymore
- Groups that hardly done any releases
@ -1262,7 +1262,7 @@ I also made 3 guides related to this one.
### WEB Scene
??? faq "WEB Scene - [CLICK TO EXPAND]"
??? question "WEB Scene - [CLICK TO EXPAND]"
One of the few scene groups that released quality releases.
@ -1284,7 +1284,7 @@ I also made 3 guides related to this one.
<sub>Amazon</sub>
??? faq "Amazon - [CLICK TO EXPAND]"
??? question "Amazon - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Amazon_Prime_Video){:target="_blank" rel="noopener noreferrer"}
@ -1302,7 +1302,7 @@ I also made 3 guides related to this one.
<sub>Apple TV+</sub>
??? faq "Apple TV+ - [CLICK TO EXPAND]"
??? question "Apple TV+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Apple_TV%2B){:target="_blank" rel="noopener noreferrer"}
@ -1320,7 +1320,7 @@ I also made 3 guides related to this one.
<sub>DC Universe</sub>
??? faq "DC Universe - [CLICK TO EXPAND]"
??? question "DC Universe - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/DC_Universe_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1338,7 +1338,7 @@ I also made 3 guides related to this one.
<sub>Disney+</sub>
??? faq "Disney+ - [CLICK TO EXPAND]"
??? question "Disney+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Disney%2B){:target="_blank" rel="noopener noreferrer"}
@ -1356,7 +1356,7 @@ I also made 3 guides related to this one.
<sub>HBO Max</sub>
??? faq "HBO Max - [CLICK TO EXPAND]"
??? question "HBO Max - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/HBO_Max){:target="_blank" rel="noopener noreferrer"}
@ -1374,7 +1374,7 @@ I also made 3 guides related to this one.
<sub>HBO</sub>
??? faq "HBO - [CLICK TO EXPAND]"
??? question "HBO - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/HBO){:target="_blank" rel="noopener noreferrer"}
@ -1392,7 +1392,7 @@ I also made 3 guides related to this one.
<sub>Hulu</sub>
??? faq "Hulu - [CLICK TO EXPAND]"
??? question "Hulu - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Hulu){:target="_blank" rel="noopener noreferrer"}
@ -1410,7 +1410,7 @@ I also made 3 guides related to this one.
<sub>NLZiet</sub>
??? faq "NLZiet - [CLICK TO EXPAND]"
??? question "NLZiet - [CLICK TO EXPAND]"
NLZIET is the online service of Dutch broadcasters that provides non-stop tv, commercial-free. The streaming service brings the best of all channels straight to your preferred device and lets you see your favorite tv content in high quality on all available platforms; anytime and anywhere.
@ -1428,7 +1428,7 @@ I also made 3 guides related to this one.
<sub>Netflix</sub>
??? faq "Netflix - [CLICK TO EXPAND]"
??? question "Netflix - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Netflix){:target="_blank" rel="noopener noreferrer"}
@ -1446,7 +1446,7 @@ I also made 3 guides related to this one.
<sub>Paramount+</sub>
??? faq "Paramount+ - [CLICK TO EXPAND]"
??? question "Paramount+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Paramount%2B){:target="_blank" rel="noopener noreferrer"}
@ -1464,7 +1464,7 @@ I also made 3 guides related to this one.
<sub>Peacock TV</sub>
??? faq "Peacock TV - [CLICK TO EXPAND]"
??? question "Peacock TV - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Peacock_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1482,7 +1482,7 @@ I also made 3 guides related to this one.
<sub>Quibi</sub>
??? faq "Quibi - [CLICK TO EXPAND]"
??? question "Quibi - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Quibi){:target="_blank" rel="noopener noreferrer"}
@ -1500,7 +1500,7 @@ I also made 3 guides related to this one.
<sub>SHOWTIME</sub>
??? faq "SHOWTIME - [CLICK TO EXPAND]"
??? question "SHOWTIME - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Showtime_(TV_network)){:target="_blank" rel="noopener noreferrer"}
@ -1518,7 +1518,7 @@ I also made 3 guides related to this one.
<sub>Videoland</sub>
??? faq "Videoland - [CLICK TO EXPAND]"
??? question "Videoland - [CLICK TO EXPAND]"
Videoland is a Dutch OTT online service provider owned by RTL Nederland. Originally it was a retail chain of video rental stores. Its main competitor is Netflix.
@ -1536,7 +1536,7 @@ I also made 3 guides related to this one.
<sub>RED = Youtube Red = Youtube Premium</sub>
??? faq "Youtube Red - [CLICK TO EXPAND]"
??? question "Youtube Red - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/YouTube_Premium){:target="_blank" rel="noopener noreferrer"}
@ -1554,7 +1554,7 @@ I also made 3 guides related to this one.
<sub>iT = iTunes</sub>
??? faq "iTunes - [CLICK TO EXPAND]"
??? question "iTunes - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/ITunes){:target="_blank" rel="noopener noreferrer"}
@ -1572,7 +1572,7 @@ I also made 3 guides related to this one.
<sub>CANAL = CANAL+/MyCANAL</sub>
??? faq "Canal+ - [CLICK TO EXPAND]"
??? question "Canal+ - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Canal%2B){:target="_blank" rel="noopener noreferrer"}
@ -1590,7 +1590,7 @@ I also made 3 guides related to this one.
<sub>SALTO = SⱯLTO</sub>
??? faq "SⱯLTO - [CLICK TO EXPAND]"
??? question "SⱯLTO - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/Salto_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
@ -1608,7 +1608,7 @@ I also made 3 guides related to this one.
<sub>RTBF = Radio-télévision belge de la Communauté française (Radio Télévision Belge Francophone)</sub>
??? faq "RTBF - [CLICK TO EXPAND]"
??? question "RTBF - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://en.wikipedia.org/wiki/RTBF){:target="_blank" rel="noopener noreferrer"}
@ -1628,7 +1628,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 01 (Top SeaDex Muxers)
??? faq "Anime BD Tier 01 (Top SeaDex Muxers) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 01 (Top SeaDex Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1643,7 +1643,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 02 (SeaDex Muxers)
??? faq "Anime BD Tier 02 (SeaDex Muxers) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 02 (SeaDex Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1658,7 +1658,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 03 (SeaDex Muxers)
??? faq "Anime BD Tier 03 (SeaDex Muxers) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 03 (SeaDex Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1673,7 +1673,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 04 (SeaDex Muxers)
??? faq "Anime BD Tier 04 (SeaDex Muxers) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 04 (SeaDex Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1688,7 +1688,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 05 (Remuxes)
??? faq "Anime BD Tier 05 (Remuxes) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 05 (Remuxes) - [CLICK TO EXPAND]"
Groups that are consistent and do Remuxes
??? example "JSON - [CLICK TO EXPAND]"
@ -1703,7 +1703,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 06 (FanSubs)
??? faq "Anime BD Tier 06 (FanSubs) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 06 (FanSubs) - [CLICK TO EXPAND]"
FanSub groups that are consistent
??? example "JSON - [CLICK TO EXPAND]"
@ -1718,7 +1718,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 07 (P2P/Scene)
??? faq "Anime BD Tier 07 (P2P/Scene) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 07 (P2P/Scene) - [CLICK TO EXPAND]"
Known P2P and Scene Anime groups
??? example "JSON - [CLICK TO EXPAND]"
@ -1733,7 +1733,7 @@ I also made 3 guides related to this one.
### Anime BD Tier 08 (Mini Encodes)
??? faq "Anime BD Tier 08 (Mini Encodes) - [CLICK TO EXPAND]"
??? question "Anime BD Tier 08 (Mini Encodes) - [CLICK TO EXPAND]"
Know groups that do mini encodes
??? example "JSON - [CLICK TO EXPAND]"
@ -1748,7 +1748,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 01 (Muxers)
??? faq "Anime Web Tier 01 (Muxers) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 01 (Muxers) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1763,7 +1763,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 02 (Top FanSubs)
??? faq "Anime Web Tier 02 (Top FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 02 (Top FanSubs) - [CLICK TO EXPAND]"
Groups that do the best releases as per SeaDex. They are more consistent and trump others
??? example "JSON - [CLICK TO EXPAND]"
@ -1778,7 +1778,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 03 (Official Subs)
??? faq "Anime Web Tier 03 (Official Subs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 03 (Official Subs) - [CLICK TO EXPAND]"
Official sub groups that tend to be more consistent and release fast
??? example "JSON - [CLICK TO EXPAND]"
@ -1793,7 +1793,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 04 (Official Subs)
??? faq "Anime Web Tier 04 (Official Subs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 04 (Official Subs) - [CLICK TO EXPAND]"
Official sub groups
??? example "JSON - [CLICK TO EXPAND]"
@ -1808,7 +1808,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 05 (FanSubs)
??? faq "Anime Web Tier 05 (FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 05 (FanSubs) - [CLICK TO EXPAND]"
FanSub groups that are consistent
??? example "JSON - [CLICK TO EXPAND]"
@ -1823,7 +1823,7 @@ I also made 3 guides related to this one.
### Anime Web Tier 06 (FanSubs)
??? faq "Anime Web Tier 06 (FanSubs) - [CLICK TO EXPAND]"
??? question "Anime Web Tier 06 (FanSubs) - [CLICK TO EXPAND]"
FanSub groups that are consistent
??? example "JSON - [CLICK TO EXPAND]"
@ -1838,7 +1838,7 @@ I also made 3 guides related to this one.
### Anime Raws
??? faq "Anime Raws - [CLICK TO EXPAND]"
??? question "Anime Raws - [CLICK TO EXPAND]"
A collection of know groups that release raws
??? example "JSON - [CLICK TO EXPAND]"
@ -1853,7 +1853,7 @@ I also made 3 guides related to this one.
### Anime LQ Groups
??? faq "Anime LQ Groups - [CLICK TO EXPAND]"
??? question "Anime LQ Groups - [CLICK TO EXPAND]"
A collection of known Low Quality groups.
??? example "JSON - [CLICK TO EXPAND]"
@ -1868,7 +1868,7 @@ I also made 3 guides related to this one.
### Uncensored
??? faq "Uncensored - [CLICK TO EXPAND]"
??? question "Uncensored - [CLICK TO EXPAND]"
This CF covers releases that are uncensored
??? example "JSON - [CLICK TO EXPAND]"
@ -1883,7 +1883,7 @@ I also made 3 guides related to this one.
### v0
??? faq "v0 - [CLICK TO EXPAND]"
??? question "v0 - [CLICK TO EXPAND]"
CF to cover releases named with v0 which we don't want
??? example "JSON - [CLICK TO EXPAND]"
@ -1898,7 +1898,7 @@ I also made 3 guides related to this one.
### v1
??? faq "v1 - [CLICK TO EXPAND]"
??? question "v1 - [CLICK TO EXPAND]"
CF to cover v1 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1913,7 +1913,7 @@ I also made 3 guides related to this one.
### v2
??? faq "v2 - [CLICK TO EXPAND]"
??? question "v2 - [CLICK TO EXPAND]"
CF to cover v2 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1928,7 +1928,7 @@ I also made 3 guides related to this one.
### v3
??? faq "v3 - [CLICK TO EXPAND]"
??? question "v3 - [CLICK TO EXPAND]"
CF to cover v3 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1943,7 +1943,7 @@ I also made 3 guides related to this one.
### v4
??? faq "v4 - [CLICK TO EXPAND]"
??? question "v4 - [CLICK TO EXPAND]"
CF to cover v4 releases
??? example "JSON - [CLICK TO EXPAND]"
@ -1958,7 +1958,7 @@ I also made 3 guides related to this one.
### VRV
??? faq "VRV - [CLICK TO EXPAND]"
??? question "VRV - [CLICK TO EXPAND]"
[From Wikipedia, the free encyclopedia](https://www.wikiwand.com/en/VRV_(streaming_service)){:target="_blank" rel="noopener noreferrer"}
??? example "JSON - [CLICK TO EXPAND]"
@ -1973,7 +1973,7 @@ I also made 3 guides related to this one.
### 10bit
??? faq "10bit - [CLICK TO EXPAND]"
??? question "10bit - [CLICK TO EXPAND]"
This CF covers releases that are 10bit
??? example "JSON - [CLICK TO EXPAND]"
@ -1988,7 +1988,7 @@ I also made 3 guides related to this one.
### Anime Dual Audio
??? faq "Anime Dual Audio - [CLICK TO EXPAND]"
??? question "Anime Dual Audio - [CLICK TO EXPAND]"
This CF covers releases that have Dual Audio
??? example "JSON - [CLICK TO EXPAND]"
@ -2003,7 +2003,7 @@ I also made 3 guides related to this one.
### Dubs Only
??? faq "Dubs Only - [CLICK TO EXPAND]"
??? question "Dubs Only - [CLICK TO EXPAND]"
This CF covers releases that only have Dubs
??? example "JSON - [CLICK TO EXPAND]"
@ -2022,7 +2022,7 @@ I also made 3 guides related to this one.
### Multi-French
??? faq "Multi-French - [CLICK TO EXPAND]"
??? question "Multi-French - [CLICK TO EXPAND]"
Recognize movies that include the original and the french audio. Work only after import as it need the result from FFprobe to get which audio are present. Will rename the release to keep the recognition of 'Multi' by the [Multi-Audio](#multi-audio) custom format.
@ -2038,7 +2038,7 @@ I also made 3 guides related to this one.
### Multi-Audio
??? faq "Multi-Audio - [CLICK TO EXPAND]"
??? question "Multi-Audio - [CLICK TO EXPAND]"
A slightly modified [Multi](#multi) Custom Formats that recognize VF and VO inside the name.
@ -2054,7 +2054,7 @@ I also made 3 guides related to this one.
### French Audio
??? faq "French Audio - [CLICK TO EXPAND]"
??? question "French Audio - [CLICK TO EXPAND]"
This will recognize every kind of French Audio.
@ -2070,7 +2070,7 @@ I also made 3 guides related to this one.
### VFF
??? faq "VFF - [CLICK TO EXPAND]"
??? question "VFF - [CLICK TO EXPAND]"
Full French version (dubbing done in France) and French version (normally equivalent to VFQ).
@ -2086,7 +2086,7 @@ I also made 3 guides related to this one.
### VOF
??? faq "VOF - [CLICK TO EXPAND]"
??? question "VOF - [CLICK TO EXPAND]"
Original French Version.
@ -2102,7 +2102,7 @@ I also made 3 guides related to this one.
### VFI
??? faq "VFI - [CLICK TO EXPAND]"
??? question "VFI - [CLICK TO EXPAND]"
International French Version. VF[1-9] or FR[1-9] indicates the number of dubs present (normally VF2 being VFF and VFQ) and is considered as an International French release.
@ -2118,7 +2118,7 @@ I also made 3 guides related to this one.
### VFQ
??? faq "VFQ - [CLICK TO EXPAND]"
??? question "VFQ - [CLICK TO EXPAND]"
Canadian French Version.
@ -2134,7 +2134,7 @@ I also made 3 guides related to this one.
### VQ
??? faq "VQ - [CLICK TO EXPAND]"
??? question "VQ - [CLICK TO EXPAND]"
Quebec Version (strong Quebec accent, ex: The Simpsons movie).
@ -2150,7 +2150,7 @@ I also made 3 guides related to this one.
### VFB
??? faq "VFB - [CLICK TO EXPAND]"
??? question "VFB - [CLICK TO EXPAND]"
Belgian French Version.
@ -2166,7 +2166,7 @@ I also made 3 guides related to this one.
### VOSTFR
??? faq "VOSTFR - [CLICK TO EXPAND]"
??? question "VOSTFR - [CLICK TO EXPAND]"
Indicates soundtrack in the original language, with French subtitles. It should be noted that SUBFRENCH is included inside this Custom Format. However, SUB often mean that the subtitle was embedded inside the picture (hardcoded). French releases tend to mix both, leading some VOSTFR being labelled as SUBFRENCH and SUBFRENCH as VOSTFR.
@ -2182,7 +2182,7 @@ I also made 3 guides related to this one.
### FanSUB
??? faq "FanSUB - [CLICK TO EXPAND]"
??? question "FanSUB - [CLICK TO EXPAND]"
Action of subtitling a video for personal and non-professional purposes. The quality of FanSUBs can vary enormously (accuracy of translation, mistakes, etc.) and could lead to so called FastSUBs.
@ -2198,7 +2198,7 @@ I also made 3 guides related to this one.
### FastSUB
??? faq "FastSUB - [CLICK TO EXPAND]"
??? question "FastSUB - [CLICK TO EXPAND]"
FanSUB, but made as quickly as possible, at the expense of quality.
@ -2218,7 +2218,7 @@ I also made 3 guides related to this one.
### FR Remux Tier 01
??? faq "Remux Tier 01 - [CLICK TO EXPAND]"
??? question "Remux Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups doing remuxes with multiple sources (discs) mixing what's best.
@ -2236,7 +2236,7 @@ I also made 3 guides related to this one.
### FR HD Bluray Tier 01
??? faq "FR HD Bluray Tier 01 - [CLICK TO EXPAND]"
??? question "FR HD Bluray Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that created encodes from the remuxes without micro-sizing them.
@ -2254,7 +2254,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 01
??? faq "FR WEB Tier 01 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that source directly from the streaming service.
@ -2271,7 +2271,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 02
??? faq "FR WEB Tier 02 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 02 - [CLICK TO EXPAND]"
- WIP
- Groups that source directly from the streaming service but are not so active.
@ -2289,7 +2289,7 @@ I also made 3 guides related to this one.
### FR WEB Tier 03
??? faq "FR WEB Tier 03 - [CLICK TO EXPAND]"
??? question "FR WEB Tier 03 - [CLICK TO EXPAND]"
- WIP
- Groups that haven't released much or are not well recognized. (yet)
@ -2307,7 +2307,7 @@ I also made 3 guides related to this one.
### FR Anime Tier 01
??? faq "FR Anime Tier 01 - [CLICK TO EXPAND]"
??? question "FR Anime Tier 01 - [CLICK TO EXPAND]"
- WIP
- Groups that are know to be still active and doing only Anime.
@ -2324,7 +2324,7 @@ I also made 3 guides related to this one.
### FR Anime Tier 02
??? faq "FR Anime Tier 02 - [CLICK TO EXPAND]"
??? question "FR Anime Tier 02 - [CLICK TO EXPAND]"
- WIP
- Groups that are know to be still active and doing Anime and other type of release.
@ -2343,7 +2343,7 @@ I also made 3 guides related to this one.
### FR Anime FanSub
??? faq "FR Anime FanSub - [CLICK TO EXPAND]"
??? question "FR Anime FanSub - [CLICK TO EXPAND]"
Known good groups that are doing only FanSub.
@ -2359,7 +2359,7 @@ I also made 3 guides related to this one.
### FR Scene Groups
??? faq "FR Scene Groups - [CLICK TO EXPAND]"
??? question "FR Scene Groups - [CLICK TO EXPAND]"
Known French Scene groups.
@ -2377,7 +2377,7 @@ I also made 3 guides related to this one.
<sub>French Low Quality Releases = FR LQ</sub>
??? faq "FR LQ - [CLICK TO EXPAND]"
??? question "FR LQ - [CLICK TO EXPAND]"
A collection of known French Low Quality groups that are often banned from the the top trackers because their lack of quality.

@ -30,7 +30,7 @@ After selecting the `Import` button you will get a screen that has all the Custo
![cf-import-done](images/cf-import-done.png)
!!! attention "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
!!! warning "The Import to update existing Custom Formats replaces the existing Custom Format, so all manual changes you did to it will be lost :warning:"
### TRaSH Sync

@ -2,7 +2,7 @@
*aka How to setup Custom Formats (Anime)*<br><br>
!!! attention
!!! warning
You must be running Sonarr V4 to be able to use this setup.
![V4](https://img.shields.io/badge/dynamic/json?query=%24.version&url=https://raw.githubusercontent.com/hotio/sonarr/v4/VERSION.json&label=Current%20V4%20Version&style=for-the-badge&color=4051B5){ .off-glb }
@ -26,7 +26,7 @@ The vast majority of releases can be found on [Nyaa](https://nyaa.si/){:target="
When adding a new series make sure you set the series type to Anime
??? check "example - [Click to Expand]"
??? success "example - [Click to Expand]"
![!cfa-seriestype](images/cfa-seriestype.png)
### Recommended naming scheme
@ -35,7 +35,7 @@ When adding a new series make sure you set the series type to Anime
{{ sonarr['naming']['sonarr-naming']['episodes']['anime']['default:4'] }}
```
??? summary "Results: - [Click to Expand]"
??? abstract "Results: - [Click to Expand]"
Single Episode:

@ -113,7 +113,7 @@ Utilisez les paramètres principaux suivants dans votre profil.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**
@ -151,7 +151,7 @@ Utilisez les paramètres principaux suivants dans votre profil.
La raison pour laquelle le WEB 1080p est fusionné avec le 2160p est que certaines sorties NF ne seront pas publiées en 4k, mais possède tout de même du DV/HDR.
Si vous voulez faire la même chose, veillez à remplacer [x265 (HD)](/Sonarr/sonarr-collection-of-custom-formats/#x265-hd){:target="_blank" rel="noopener noreferrer"} par [x265 (no HDR/DV)](/Sonarr/sonarr-collection-of-custom-formats/#x265-no-hdrdv){:target="_blank" rel="noopener noreferrer"}.
??? summary "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
??? abstract "Logique et fonctionnement - [CLIQUEZ POUR AFFICHER]"
**En fonction de ce qui est disponible en premier, la logique sera la suivante :**

@ -37,10 +37,10 @@ Select the profile that you want to use/prefer.
At the bottom in your chosen profile you will see the added Custom Formats where you can start setting up the scores.
??? check "Screenshot example - [CLICK TO EXPAND]"
??? success "Screenshot example - [CLICK TO EXPAND]"
![!cf-quality-profile-cf](images/cf-quality-profile-cf.png)
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.
@ -64,7 +64,7 @@ At the bottom in your chosen profile you will see the added Custom Formats where
## Which Quality Profile should you choose
??? summary "Which Quality Profile should you choose - [CLICK TO EXPAND]"
??? abstract "Which Quality Profile should you choose - [CLICK TO EXPAND]"
![Flowchart](/Sonarr/images/flowchart-custom-format-sonarr.png)
@ -102,7 +102,7 @@ Use the following main settings in your profile.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- It will download WEB-DL 1080p. (If you also enabled `WEB 720p` and/or `HDTV 1080p` it will upgrade till `Upgrade Until`)
- The downloaded media will be upgraded to any of the added Custom Formats until a score of 10000.
@ -141,7 +141,7 @@ Use the following main settings in your profile.
{! include-markdown "../../includes/starr/move-quality-to-top.md" !}
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
- It will download WEB-2160p with HDR/DV.
- The downloaded media will be upgraded to any of the added Custom Formats until a score of 10000.
@ -190,13 +190,13 @@ Use the following main settings in your profile.
### Why only WEB-DL
??? faq "Why do you only have a release profile for WEB-DL - [CLICK TO EXPAND]"
??? question "Why do you only have a release profile for WEB-DL - [CLICK TO EXPAND]"
I only do WEB-DL my self for TV shows because in my opinion WEB-DL is the sweet spot between quality and size and you often don't see big differences anyway for TV shows. (Except for shows like GOT, Vikings, etc)
### Why prefer P2P groups
??? faq "Why do you prefer P2P groups over scene groups - [CLICK TO EXPAND]"
??? question "Why do you prefer P2P groups over scene groups - [CLICK TO EXPAND]"
Scene groups always release in a rush to bring it out as fast as possible.
@ -206,7 +206,7 @@ Use the following main settings in your profile.
### Why so many repacks/propers
??? faq "Why do I see so many repacks/propers of Amazon WEB-DLs lately - [CLICK TO EXPAND]"
??? question "Why do I see so many repacks/propers of Amazon WEB-DLs lately - [CLICK TO EXPAND]"
A large portion of Amazon WEB-DLs in the last week have only had 192Kbps DD+5.1, because that's all Amazon made available initially. The proper 640Kbps DD+5.1 audio might appear a few hours later or a few months, but when they get updated, the episodes will be REPACKED.
@ -224,7 +224,7 @@ Use the following main settings in your profile.
### Custom Formats to avoid certain releases
??? FAQ "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
??? question "How to use a Custom Format to avoid certain releases? - [CLICK TO EXPAND]"
For Custom Formats you really want to avoid, set it to something really low like `-10000` and not something like `-10`.
Being when you add a Custom Format what you prefer and you set it to something like `+10` it could happen that for example the `BR-DISK` will be downloaded (-10)+(+10)=0 and if your `Minimum Custom Format Score` is set at `0`.
@ -237,7 +237,7 @@ This is a must have for every Quality Profile you use in my opinion. All these C
### Custom Formats with a score of 0
??? FAQ "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
??? question "What do Custom Formats with a score of 0 do? - [CLICK TO EXPAND]"
All Custom Formats with a score of 0 are pure informational and don't do anything.

@ -1,4 +1,4 @@
??? summary "All HDR Formats + DV (WEBDL) + HDR10+ Boost - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) + HDR10+ Boost - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -21,5 +21,5 @@
| [{{ radarr['cf']['hdr10plus-boost']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hdr10plus-boost) | {{ radarr['cf']['hdr10plus-boost']['trash_score'] }} | {{ radarr['cf']['hdr10plus-boost']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
![!HDR Formats Flowchart](/Radarr/images/flowchart-hdr-formats.png){ data-title="Follow the flowchart, continue till you hit finished." data-description="- The yellow boxes match the Quality Profile on the right side of the Guide.<br>- If the Guide says <b>ALL</b> it means <b>ALL</b>. (<u>Even if you have a TV/Hardware Media Player that can't handle for example DV or HDR10+</u>, else you will limit yourself what you're able to get or get download loops, this also counts for the audio formats).<br><br><b>All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.</b>" }
@ -17,5 +17,5 @@
| [{{ radarr['cf']['hlg']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hlg) | {{ radarr['cf']['hlg']['trash_score'] }} | {{ radarr['cf']['hlg']['trash_id'] }} |
| [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) | {{ radarr['cf']['dv-webdl']['trash_score'] }} | {{ radarr['cf']['dv-webdl']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "All HDR Formats - [CLICK TO EXPAND]"
??? abstract "All HDR Formats - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -18,5 +18,5 @@
| [{{ radarr['cf']['pq']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#pq) | {{ radarr['cf']['pq']['trash_score'] }} | {{ radarr['cf']['pq']['trash_id'] }} |
| [{{ radarr['cf']['hlg']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hlg) | {{ radarr['cf']['hlg']['trash_score'] }} | {{ radarr['cf']['hlg']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "Anime CF/Scoring - [Click to Expand]"
??? abstract "Anime CF/Scoring - [Click to Expand]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------- | -------------------------------------------------------------------- |
| [{{ radarr['cf']['anime-bd-tier-01-top-seadex-muxers']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#anime-bd-tier-01-top-seadex-muxers) | {{ radarr['cf']['anime-bd-tier-01-top-seadex-muxers']['trash_score'] }} | {{ radarr['cf']['anime-bd-tier-01-top-seadex-muxers']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Audio - [CLICK TO EXPAND]"
??? abstract "Audio - [CLICK TO EXPAND]"
![!HDR Formats Flowchart](/Radarr/images/flowchart-audio.png)

@ -1,4 +1,4 @@
??? summary "HQ Release Groups - [CLICK TO EXPAND]"
??? abstract "HQ Release Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ----------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------ | --------------------------------------------------- |
| [{{ radarr['cf']['hd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hd-bluray-tier-01) | {{ radarr['cf']['hd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['hd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Release Groups - [CLICK TO EXPAND]"
??? abstract "HQ Release Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------- | -------------------------------------------------- | ----------------------------------------------- |
| [{{ radarr['cf']['remux-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#remux-tier-01) | {{ radarr['cf']['remux-tier-01']['trash_score'] }} | {{ radarr['cf']['remux-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Release Groups - [CLICK TO EXPAND]"
??? abstract "HQ Release Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------- | ---------------------------------------------------- |
| [{{ radarr['cf']['uhd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#uhd-bluray-tier-01) | {{ radarr['cf']['uhd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['uhd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "All HDR Formats - [CLICK TO EXPAND]"
??? abstract "All HDR Formats - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -18,5 +18,5 @@
| [{{ radarr['cf']['pq']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#pq) | {{ radarr['cf']['pq']['trash_score'] }} | {{ radarr['cf']['pq']['trash_id'] }} |
| [{{ radarr['cf']['hlg']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hlg) | {{ radarr['cf']['hlg']['trash_score'] }} | {{ radarr['cf']['hlg']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ radarr['cf']['dv-webdl']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ radarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "Misc - [CLICK TO EXPAND]"
??? abstract "Misc - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------- | -------------------------------------------- | ----------------------------------------- |
| [{{ radarr['cf']['repack-proper']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#repackproper) | {{ radarr['cf']['repack-proper']['trash_score'] }} | {{ radarr['cf']['repack-proper']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Movie Versions - [CLICK TO EXPAND]"
??? abstract "Movie Versions - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ----------------------------------------------------------------------------------------------------------------- | --------------------------------------------------- | ------------------------------------------------ |
| [{{ radarr['cf']['hybrid']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hybrid) | {{ radarr['cf']['hybrid']['trash_score'] }} | {{ radarr['cf']['hybrid']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Movie Versions - [CLICK TO EXPAND]"
??? abstract "Movie Versions - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ----------------------------------------------------------------------------------------------------------------- | --------------------------------------------------- | ------------------------------------------------ |
| [{{ radarr['cf']['hybrid']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#hybrid) | {{ radarr['cf']['hybrid']['trash_score'] }} | {{ radarr['cf']['hybrid']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Optional UHD - [CLICK TO EXPAND]"
??? abstract "Optional UHD - [CLICK TO EXPAND]"
!!! danger "**The `SDR` is a MUST for this Quality Profile** :warning:"

@ -1,4 +1,4 @@
??? summary "Optional - [CLICK TO EXPAND]"
??? abstract "Optional - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ radarr['cf']['bad-dual-groups']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#bad-dual-groups) | {{ radarr['cf']['bad-dual-groups']['trash_score'] }} | {{ radarr['cf']['bad-dual-groups']['trash_id'] }} |
@ -24,7 +24,7 @@
Remuxes and Bluray have a fallback to HDR10.
!!! hint
!!! tip
`[DV WEBDL]` = This custom format you need to score depending of your personal use and setup.
- If you only watch your movies on a setup that completely supports Dolby Vision from start to end then give it a score of `0` or just don't add it.

@ -1,4 +1,4 @@
??? summary "Streaming Services - [CLICK TO EXPAND]"
??? abstract "Streaming Services - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ----------------------------------------------------------------------------------------- | ------------------------------------------ | --------------------------------------- |
| [{{ radarr['cf']['amzn']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#amzn) | 0 | {{ radarr['cf']['amzn']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted - [CLICK TO EXPAND]"
??? abstract "Unwanted - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ radarr['cf']['br-disk']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#br-disk) | {{ radarr['cf']['br-disk']['trash_score'] }} | {{ radarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
!!! attention "Attention"
!!! warning "Attention"
All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.
From experience most of the time when people change scores or leave out certain CF that work together they end up with undesired results.

@ -1,4 +1,4 @@
??? summary "All HDR Formats + DV (WEBDL) + HDR10+ Boost - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) + HDR10+ Boost - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -21,5 +21,5 @@
| [{{ sonarr['cf']['hdr10plus-boost']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#hdr10plus-boost) | {{ sonarr['cf']['hdr10plus-boost']['trash_score'] }} | {{ sonarr['cf']['hdr10plus-boost']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
??? abstract "All HDR Formats + DV (WEBDL) - [CLICK TO EXPAND]"
![!HDR Formats Flowchart](/Radarr/images/flowchart-hdr-formats.png){ data-title="Follow the flowchart, continue till you hit finished." data-description="- The yellow boxes match the Quality Profile on the right side of the Guide.<br>- If the Guide says <b>ALL</b> it means <b>ALL</b>. (<u>Even if you have a TV/Hardware Media Player that can't handle for example DV or HDR10+</u>, else you will limit yourself what you're able to get or get download loops, this also counts for the audio formats).<br><br><b>All the used scores and combination of Custom Formats in this Guide are tested to get the desired results and prevent download loops as much as possible.</b>" }
@ -17,5 +17,5 @@
| [{{ sonarr['cf']['hlg']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#hlg) | {{ sonarr['cf']['hlg']['trash_score'] }} | {{ sonarr['cf']['hlg']['trash_id'] }} |
| [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) | {{ sonarr['cf']['dv-webdl']['trash_score'] }} | {{ sonarr['cf']['dv-webdl']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "All HDR Formats - [CLICK TO EXPAND]"
??? abstract "All HDR Formats - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -17,5 +17,5 @@
| [{{ sonarr['cf']['pq']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#pq) | {{ sonarr['cf']['pq']['trash_score'] }} | {{ sonarr['cf']['pq']['trash_id'] }} |
| [{{ sonarr['cf']['hlg']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#hlg) | {{ sonarr['cf']['hlg']['trash_score'] }} | {{ sonarr['cf']['hlg']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "Anime CF/Scoring - [Click to Expand]"
??? abstract "Anime CF/Scoring - [Click to Expand]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------- | -------------------------------------------------------------------- |
| [{{ sonarr['cf']['anime-bd-tier-01-top-seadex-muxers']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#anime-bd-tier-01-top-seadex-muxers) | {{ sonarr['cf']['anime-bd-tier-01-top-seadex-muxers']['trash_score'] }} | {{ sonarr['cf']['anime-bd-tier-01-top-seadex-muxers']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Audio - [CLICK TO EXPAND]"
??? abstract "Audio - [CLICK TO EXPAND]"
![!HDR Formats Flowchart](/Radarr/images/flowchart-audio.png)

@ -1,4 +1,4 @@
??? summary "HDR Formats - [CLICK TO EXPAND]"
??? abstract "HDR Formats - [CLICK TO EXPAND]"
{! include-markdown "../../includes/cf/dv-info.md" !}
@ -18,5 +18,5 @@
| [{{ sonarr['cf']['pq']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#pq) | {{ sonarr['cf']['pq']['trash_score'] }} | {{ sonarr['cf']['pq']['trash_id'] }} |
| [{{ sonarr['cf']['hlg']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#hlg) | {{ sonarr['cf']['hlg']['trash_score'] }} | {{ sonarr['cf']['hlg']['trash_id'] }} |
!!! hint
!!! tip
If you (or family members you share your collection with) have a setup that doesn't support Dolby Vision then it's best to add **ALL** the HDR Formats listed above (including **ALL** the DV ones (with and without HDR in it), It is important to also add the [{{ sonarr['cf']['dv-webdl']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#dv-webdl) Custom Format with a score of {{ sonarr['cf']['dv-webdl']['trash_score'] }}

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------- | ------------------------------------------------ | --------------------------------------------- |
| [{{ sonarr['cf']['web-tier-01']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#web-tier-01) | {{ sonarr['cf']['web-tier-01']['trash_score'] }} | {{ sonarr['cf']['web-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Misc - [CLICK TO EXPAND]"
??? abstract "Misc - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------- | -------------------------------------------------- | ----------------------------------------------- |
| [{{ sonarr['cf']['repack-proper']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#repackproper) | {{ sonarr['cf']['repack-proper']['trash_score'] }} | {{ sonarr['cf']['repack-proper']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Optional UHD - [CLICK TO EXPAND]"
??? abstract "Optional UHD - [CLICK TO EXPAND]"
!!! danger "**The `SDR` is a MUST for this Quality Profile** :warning:"

@ -1,4 +1,4 @@
??? summary "Streaming Services - [CLICK TO EXPAND]"
??? abstract "Streaming Services - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------- | ----------------------------------------- | -------------------------------------- |
| [{{ sonarr['cf']['amzn']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#amzn) | {{ sonarr['cf']['amzn']['trash_score'] }} | {{ sonarr['cf']['amzn']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted UHD - [CLICK TO EXPAND]"
??? abstract "Unwanted UHD - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted - [CLICK TO EXPAND]"
??? abstract "Unwanted - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -7,7 +7,7 @@ This basic example is based on the use of docker images
{! include-markdown "../hardlinks/bad-path-suggestion.md" !}
<!-- --8<-- "includes/hardlinks/bad-path-suggestion.md" -->
!!! attention ""
!!! warning ""
But you're able to change this, by not using the pre-defined/recommended paths like:
- `/downloads` => `/data/downloads`, `/data/usenet`, `/data/torrents`

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------- | ---------------------------------------------------------- |
| [{{ radarr['cf']['french-hd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-hd-bluray-tier-01) | {{ radarr['cf']['french-hd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['french-hd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
??? abstract "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------- | ---------------------------------------------------------- |
| [{{ radarr['cf']['french-hd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-hd-bluray-tier-01) | {{ radarr['cf']['french-hd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['french-hd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------- | ------------------------------------------------------ |
| [{{ radarr['cf']['french-remux-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-remux-tier-01) | {{ radarr['cf']['french-remux-tier-01']['trash_score'] }} | {{ radarr['cf']['french-remux-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
??? abstract "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------- | ------------------------------------------------------ |
| [{{ radarr['cf']['french-remux-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-remux-tier-01) | {{ radarr['cf']['french-remux-tier-01']['trash_score'] }} | {{ radarr['cf']['french-remux-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ----------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------- | ----------------------------------------------------------- |
| [{{ radarr['cf']['french-uhd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-uhd-bluray-tier-01) | {{ radarr['cf']['french-uhd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['french-uhd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
??? abstract "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ----------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------- | ----------------------------------------------------------- |
| [{{ radarr['cf']['french-uhd-bluray-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#fr-uhd-bluray-tier-01) | {{ radarr['cf']['french-uhd-bluray-tier-01']['trash_score'] }} | {{ radarr['cf']['french-uhd-bluray-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Explanation - [CLICK TO EXPAND]"
??? abstract "Explanation - [CLICK TO EXPAND]"
| Acronyms | French Explanation | English Explanation |
| -------------------------------- | ----------------------------------------------------------------------------------- | --------------------------------------------------------------------- |
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Some Indexers in Prowlarr can rename `MULTi` releases to `MULTi.TRUEFRENCH` or `MULTi.FRENCH`. I do not recommend using such a feature along with those Custom Formats as it can lead to false positives from the VFF or VFQ Custom Formats.
??? summary "French Audio Versions - [CLICK TO EXPAND]"
??? abstract "French Audio Versions - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| -------------------------------------------------------------------------------------------------- | ----- | ----------------------------------------------- |
| [{{ radarr['cf']['french-vff']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#vff) | 0 | {{ radarr['cf']['french-vff']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Explications - [CLIQUEZ POUR AFFICHER]"
??? abstract "Explications - [CLIQUEZ POUR AFFICHER]"
| Acronymes | French Explanation | English Explanation |
| -------------------------------- | ----------------------------------------------------------------------------------- | --------------------------------------------------------------------- |
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Certains indexeurs dans Prowlarr peuvent renommer les versions `MULTi` en `MULTi.TRUEFRENCH` ou `MULTi.FRENCH`. Je ne recommande pas l'utilisation d'une telle fonction car elle peut entraîner des faux positifs avec les formats personnalisés VFF ou VFQ.
??? summary "Versions françaises - [CLIQUEZ POUR AFFICHER]"
??? abstract "Versions françaises - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| -------------------------------------------------------------------------------------------------- | ----- | ----------------------------------------------- |
| [{{ radarr['cf']['french-vff']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#vff) | 0 | {{ radarr['cf']['french-vff']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Multi audio - [CLICK TO EXPAND]"
??? abstract "Multi audio - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------- | ------------------------------------------------- | ---------------------------------------------- |
| [{{ radarr['cf']['multi-audio']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#multi-audio) | {{ radarr['cf']['multi-audio']['trash_score'] }} | {{ radarr['cf']['multi-audio']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Multi audio - [CLIQUEZ POUR AFFICHER]"
??? abstract "Multi audio - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------- | ------------------------------------------------- | ---------------------------------------------- |
| [{{ radarr['cf']['multi-audio']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#multi-audio) | {{ radarr['cf']['multi-audio']['trash_score'] }} | {{ radarr['cf']['multi-audio']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted - [CLICK TO EXPAND]"
??? abstract "Unwanted - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ radarr['cf']['br-disk']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#br-disk) | {{ radarr['cf']['br-disk']['trash_score'] }} | {{ radarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Indésirable - [CLIQUEZ POUR AFFICHER]"
??? abstract "Indésirable - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------- | ---------------------------------------------- | ------------------------------------------- |
| [{{ radarr['cf']['br-disk']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#br-disk) | {{ radarr['cf']['br-disk']['trash_score'] }} | {{ radarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------- | ------------------------------------------------------ |
| [{{ sonarr['cf']['french-anime-tier-01']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#fr-anime-tier-01) | {{ sonarr['cf']['french-anime-tier-01']['trash_score'] }} | {{ sonarr['cf']['french-anime-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
??? abstract "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------- | ------------------------------------------------------ |
| [{{ sonarr['cf']['french-anime-tier-01']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#fr-anime-tier-01) | {{ sonarr['cf']['french-anime-tier-01']['trash_score'] }} | {{ sonarr['cf']['french-anime-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLICK TO EXPAND]"
??? abstract "HQ Source Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------- | ---------------------------------------------- |
| [{{ sonarr['cf']['french-web-tier-01']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#fr-web-tier-01) | {{ sonarr['cf']['french-web-tier-01']['trash_score'] }} | {{ sonarr['cf']['french-web-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
??? abstract "HQ Source Groups - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| --------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------- | ---------------------------------------------- |
| [{{ sonarr['cf']['french-web-tier-01']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#fr-web-tier-01) | {{ sonarr['cf']['french-web-tier-01']['trash_score'] }} | {{ sonarr['cf']['french-web-tier-01']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Explanation - [CLICK TO EXPAND]"
??? abstract "Explanation - [CLICK TO EXPAND]"
| Acronyms | French Explanation | English Explanation |
| -------------------------------- | ----------------------------------------------------------------------------------- | --------------------------------------------------------------------- |
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Some Indexers in Prowlarr can rename `MULTi` releases to `MULTi.TRUEFRENCH` or `MULTi.FRENCH`. I do not recommend using such a feature along with those Custom Formats as it can lead to false positives from the VFF or VFQ Custom Formats.
??? summary "French Audio Versions - [CLICK TO EXPAND]"
??? abstract "French Audio Versions - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| -------------------------------------------------------------------------------------------------- | ----- | ----------------------------------------------- |
| [{{ sonarr['cf']['french-vff']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#vff) | 0 | {{ sonarr['cf']['french-vff']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Explications - [CLIQUEZ POUR AFFICHER]"
??? abstract "Explications - [CLIQUEZ POUR AFFICHER]"
| Acronymes | French Explanation | English Explanation |
| -------------------------------- | ----------------------------------------------------------------------------------- | --------------------------------------------------------------------- |
| TRUEFRENCH or VFF | Version Francophone Française (doublage réalisé en France) | Full French version (dubbing done in France) |
@ -18,7 +18,7 @@
!!! tip "Indexers renaming in Prowlarr"
Certains indexeurs dans Prowlarr peuvent renommer les versions `MULTi` en `MULTi.TRUEFRENCH` ou `MULTi.FRENCH`. Je ne recommande pas l'utilisation d'une telle fonction car elle peut entraîner des faux positifs avec les formats personnalisés VFF ou VFQ.
??? summary "Versions françaises - [CLIQUEZ POUR AFFICHER]"
??? abstract "Versions françaises - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| -------------------------------------------------------------------------------------------------- | ----- | ----------------------------------------------- |
| [{{ sonarr['cf']['french-vff']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#vff) | 0 | {{ sonarr['cf']['french-vff']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Multi Audio - [CLICK TO EXPAND]"
??? abstract "Multi Audio - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------- | ------------------------------------------------- | ---------------------------------------------- |
| [{{ sonarr['cf']['multi-audio']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#multi-audio) | {{ sonarr['cf']['multi-audio']['trash_score'] }} | {{ sonarr['cf']['multi-audio']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Multi Audio - [CLIQUEZ POUR AFFICHER]"
??? abstract "Multi Audio - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------- | ------------------------------------------------- | ---------------------------------------------- |
| [{{ sonarr['cf']['multi-audio']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#multi-audio) | {{ sonarr['cf']['multi-audio']['trash_score'] }} | {{ sonarr['cf']['multi-audio']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "French Streaming Services - [CLICK TO EXPAND]"
??? abstract "French Streaming Services - [CLICK TO EXPAND]"
| Custom Format | Trash ID |
| ------------------------------------------------------------------------------------------------ | ---------------------------------------------- |
| [{{ sonarr['cf']['french-canal']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#canal) | {{ sonarr['cf']['french-canal']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Services de streaming en français - [CLIQUEZ POUR AFFICHER]"
??? abstract "Services de streaming en français - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Trash ID |
| ------------------------------------------------------------------------------------------------ | ---------------------------------------------- |
| [{{ sonarr['cf']['french-canal']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#canal) | {{ sonarr['cf']['french-canal']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted - [CLICK TO EXPAND]"
??? abstract "Unwanted - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Indésirable - [CLIQUEZ POUR AFFICHER]"
??? abstract "Indésirable - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Unwanted - [CLICK TO EXPAND]"
??? abstract "Unwanted - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -1,4 +1,4 @@
??? summary "Indésirable - [CLIQUEZ POUR AFFICHER]"
??? abstract "Indésirable - [CLIQUEZ POUR AFFICHER]"
| Formats Personnalisés | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------- | ------------------------------------------------- |
| [{{ sonarr['cf']['br-disk']['name'] }}](/Sonarr/sonarr-collection-of-custom-formats/#br-disk) | {{ sonarr['cf']['br-disk']['trash_score'] }} | {{ sonarr['cf']['br-disk']['trash_id'] }} |

@ -1,3 +1,3 @@
!!! attention ""
!!! warning ""
The default path setup suggested by some docker developers that encourages people to use mounts like `/movies`, `/tv` and `/downloads` is very suboptimal and it makes them look like two or three file systems, even if they arent (*Because of how Dockers volumes work*). It is the easiest way to get started. While easy to use, it has a major drawback. Mainly losing the ability to hardlink or instant move, resulting in a slower and more I/O intensive copy + delete is used.

@ -1,6 +1,6 @@
### Docker-Compose Commands
??? hint "docker-compose commands - [CLICK TO EXPAND]"
??? tip "docker-compose commands - [CLICK TO EXPAND]"
- `sudo docker-compose up -d` (This Docker-compose command helps builds the image, then creates and starts Docker containers. The containers are from the services specified in the compose file. If the containers are already running and you run docker-compose up, it recreates the container.)
- `sudo docker-compose pull` (Pulls an image associated with a service defined in a docker-compose.yml)

@ -1,6 +1,6 @@
## Folder Structure
!!! attention
!!! warning
It doesn't really matter which path you use for your media and appdata,

@ -1,6 +1,6 @@
### Radarr current logic
??? summary "Radarr current logic - [CLICK TO EXPAND]"
??? abstract "Radarr current logic - [CLICK TO EXPAND]"
As of 2021-11-06 the logic is as follows:
@ -17,7 +17,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/radarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use the [Repack/Proper Custom Format](/Radarr/Radarr-collection-of-custom-formats/#repackproper){:target="_blank" rel="noopener noreferrer"}

@ -1,6 +1,6 @@
### Sonarr current logic
??? summary "Sonarr current logic - [CLICK TO EXPAND]"
??? abstract "Sonarr current logic - [CLICK TO EXPAND]"
As of 2021-11-06 the logic is as follows:
@ -19,7 +19,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/sonarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use a preferred word regex of `/\b(repack|proper)\b/i`

@ -1,6 +1,6 @@
### Sonarr v4 current logic
??? summary "Sonarr v4 current logic - [CLICK TO EXPAND]"
??? abstract "Sonarr v4 current logic - [CLICK TO EXPAND]"
As of v4 release the logic is as follows:
@ -18,7 +18,7 @@
[Source: Wiki Servarr](https://wiki.servarr.com/sonarr/faq#how-are-possible-downloads-compared){:target="_blank" rel="noopener noreferrer"}
!!! attention ""
!!! warning ""
REPACKS and PROPERs are v2 of Qualities and thus rank above a non-repack of the same quality.
`Settings` => `Media Management` => `File Management` => `Proper & Repacks` Change to `Do Not Prefer` and use a preferred word regex of `/\b(repack|proper)\b/i`

@ -1,6 +1,6 @@
#### Custom Formats and scores
??? summary "Audio - [CLICK TO EXPAND]"
??? abstract "Audio - [CLICK TO EXPAND]"
!!! danger "The CF with `0` you can choose to add with a score of `0` or just don't add them.<br>The reason why we score them this low is to prevent transcoding as much as possible<br>The reason why `DTS` has a score of `0` is to make sure you don't limit your self to much."
| Custom Format | Score | Trash ID |
@ -20,7 +20,7 @@
| [{{ radarr['cf']['aac']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#aac) | :warning: 0 | {{ radarr['cf']['aac']['trash_id'] }} |
| [{{ radarr['cf']['dd']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#dd) | :warning: 0 | {{ radarr['cf']['dd']['trash_id'] }} |
??? summary "Movie Versions - [CLICK TO EXPAND]"
??? abstract "Movie Versions - [CLICK TO EXPAND]"
!!! danger "Adding `IMAX`/`IMAX Enhanced` will replace the BHDStudio release :warning:"
@ -42,7 +42,7 @@
If you don't prefer `{{ radarr['cf']['imax-enhanced']['name'] }}` then don't add it or use a score of `0`
??? summary "HQ Release Groups - [CLICK TO EXPAND]"
??? abstract "HQ Release Groups - [CLICK TO EXPAND]"
!!! danger "Adding `HD Bluray Tier xx` means you get less or not streaming optimized :warning:"
| Custom Format | Score | Trash ID |

@ -5,10 +5,10 @@
- **Minimum Custom Format Score:** `1000`[^1]
- **Upgrade Until Custom Format Score:** `10000`
??? check "example - [CLICK TO EXPAND]"
??? success "example - [CLICK TO EXPAND]"
![!Quality Profile Settings](/SQP/images/1-qp-settings.png)
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.

@ -1,6 +1,6 @@
## Why choose this quality profile
??? FAQ "Why choose this quality profile? - [CLICK TO EXPAND]"
??? question "Why choose this quality profile? - [CLICK TO EXPAND]"
- You want maximum compatibility between all devices and still a HQ releases.
- You run 2 instances of Radarr and want both version or just for the 1080p ones.

@ -1,6 +1,6 @@
## Workflow Logic
??? summary "Workflow Logic - [CLICK TO EXPAND]"
??? abstract "Workflow Logic - [CLICK TO EXPAND]"
**Depending what's released first and available the following Workflow Logic will be used:**

@ -6,7 +6,7 @@
{! include-markdown "../../includes/cf/radarr-movie-versions-imaxe.md" !}
??? summary "HQ Release Groups - [CLICK TO EXPAND]"
??? abstract "HQ Release Groups - [CLICK TO EXPAND]"
| Custom Format | Score | Trash ID |
| ------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------- | ---------------------------------------------------- |
| [{{ radarr['cf']['remux-tier-01']['name'] }}](/Radarr/Radarr-collection-of-custom-formats/#remux-tier-01) | {{ radarr['cf']['remux-tier-01']['trash_score'] }} | {{ radarr['cf']['remux-tier-01']['trash_id'] }} |

@ -5,10 +5,10 @@
- **Minimum Custom Format Score:** `550`
- **Upgrade Until Custom Format Score:** `10000`
??? check "example - [CLICK TO EXPAND]"
??? success "example - [CLICK TO EXPAND]"
![!Quality Profile Settings](/SQP/images/2-qp-settings.png)
!!! attention
!!! warning
These screenshots are just examples to show you how it should look and where you need to place the data that you need to add, they aren't always a 100% reflection of the actual data and not always 100% up to date with the actual data you need to add.
- Always follow the data described in the guide.

Some files were not shown because too many files have changed in this diff Show More

Loading…
Cancel
Save