You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
30 KiB
30 KiB
How To Set Up Hardlinks and Atomic-Moves
Description
!!! info
If you’re wondering why hard links aren’t working or why a simple move is taking far longer than it should.
Here we will try to explains it.
The paths you use on the inside matter. Because of how Docker’s volumes work, passing in two or three volumes such as the commonly suggested `/tv`, `/movies` and `/downloads` makes them look like two or three file systems, even if they aren’t. This means hard links won’t work and instead of an instant move, a slower and more I/O intensive copy + delete is used.
So you want one of the following ?
- Instant moves (Atomic-Moves) during import of the *arr (useful when using Usenet)?
- You don't want to use twice the storage when using torrents. (hardlinks)?
- You want to perma seed?
Then keep reading.
??? faq "FAQ"
### FAQ
1. Q: **What are the `*arr`?**
- Sonarr, Radarr, Lidarr, etc.
1. Q: **What are hardlinks?**
- Short answer is "having a file in multiple folders" without using up your storage, [Long Answer](https://medium.com/@krisbredemeier/the-difference-between-hard-links-and-soft-or-symbolic-links-780149244f7d){:target="_blank"}.
1. Q: **What's Atomic Moves?**
- A real move and not a copy file from download folder to media folder and then delete file from download folder.
How to Setup for
??? summary "DockSTARTer"
#### DockSTARTer
!!! note
I'm using the default paths in this example, and will keep the other paths unchanged so nothing will break if you make a mistake.
##### Folder Structure
We're going to use a mounted drive that we're going to use as storage for downloads and your media.
In this example the mounted drive will be mounted to `/mnt/` with the following folder structure.
```
storage
├── downloads
| ├── torrents
│ | ├── movies
│ | ├── music
│ | └── tv
| └── usenet
│ ├── movies
│ ├── music
│ └── tv
└── medialibrary
├── movies
├── music
└── tv
```
##### Changes to the .env
To accomplish this we need to change first a few paths in your `.env` (Usually `~/.docker/compose/.env`)
``` yaml
# Global Settings
COMPOSE_HTTP_TIMEOUT=60
DOCKERCONFDIR=~/.config/appdata
DOCKERGID=999
DOCKERHOSTNAME=DockSTARTer
DOCKERLOGGING_MAXFILE=10
DOCKERLOGGING_MAXSIZE=200k
DOCKERSTORAGEDIR=/mnt/storage
PGID=1000
PUID=1000
TZ=America/Chicago
# DEPRECATED Settings (will be removed at the end of 2020)
DOCKERSHAREDDIR=~/shared
DOWNLOADSDIR=/mnt/downloads
MEDIADIR_AUDIOBOOKS=/mnt/medialibrary/audiobooks
MEDIADIR_BOOKS=/mnt/medialibrary/books
MEDIADIR_COMICS=/mnt/medialibrary/comics
MEDIADIR_MOVIES=/mnt/medialibrary/movies
MEDIADIR_MUSIC=/mnt/medialibrary/music
MEDIADIR_TV=/mnt/medialibrary/tv
```
##### Changes to your paths
When that's all set then you will need to change the paths you're going to use in the containers from:
`/downloads` => `/storage/downloads`
`/audiobooks` => `/storage/medialibrary/audiobooks`
`/books` => `/storage/medialibrary/books`
`/comics` => `/storage/medialibrary/comics`
`/movies` => `/storage/medialibrary/movies`
`/music` => `/storage/medialibrary/music`
`/tv` => `/storage/medialibrary/tv`
##### DockSTARTer Examples
!!! info
The screenshots in the examples are using the following root path `/storage`
??? example "Sonarr Examples"
###### Sonarr
`Settings` => `Media Management` => `Importing`
`Settings` => `Media Management` => `Root Folders`
`Series` => `Add New`
??? example "Radarr Examples"
###### Radarr
`Settings` => `Media Management` => `Importing`
`Settings` => `Media Management` => `Root Folders`
`Movies` => `Add New`
??? example "SABnzbd Examples"
###### SABnzbd
`SABnzbd config` => `Folders`
`SABnzbd config` => `Categories`
??? example "NZBGet Examples"
###### NZBGet
`Settings` => `PATHS`
`Settings` => `CATEGORIES`
??? example "qBittorrent Examples"
###### qBittorrent
`Options` => `Downloads`
??? example "Deluge Example"
###### Deluge
`Preferences` => `Downloads`
??? example "ruTorrent Examples"
###### ruTorrent
`../config/rtorrent/config/rtorrent.rc` (path to your appdata)
`Settings` => `Downloads`
`Settings` => `Autotools`
??? summary "UnRaid"
#### UnRaid
!!! note
The first thing you need to do is forget the suggested paths from the Spaceinvader One YouTube Tutorials,
and don't use the predefined paths from the unraid templates.
(Spaceinvader One YouTube guides are great to learn how to start with unraid or how to setup certain applications, and yes I did and still do use them. Probably the main reason why he's using those path is because they are predefined in the template)
!!! attention
To get Hardlinks and Atomic-Moves working with Unraid you will need to make use of **ONE** share with subfolders.
##### Create the main share
For this example I'm using my own setup and preferred share `data`.
Go to your dashboard and on the top select `shares` select `add share` .
[](https://raw.githubusercontent.com/TRaSH-/Guides/master/docs/Misc/images/unraid-main-share.png){:target="_blank"}
1. use `data`
1. if you got a cache drive and want to make use of it put it on `Yes` or keep it disabled (Hardlinks will stay in tact if you're using the cache)
1. click on `ADD SHARE`
!!! note
Keep in mind regarding the use of the Cache drive, The mover can't move files that are in use, like when seeding with torrents. You will need to shutdown your client or stop/pause the torrents so the mover can move them to your Array.
With Usenet you won't have any issues.
##### Folder Structure
On the host (Unraid) you will need to add `/mnt/user` before it. **So `/mnt/user/data`**
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
These subfolders you need to create your self, you can use krusader or winscp to create them or any other way you prefer.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
*I'm using lower case on all folder on purpose, being Linux is case sensitive.*
##### Setting up the containers
After you created all the needed folders it's time to setup the paths in the docker containers.
Go to your dashboard and select your docker container you want to edit or if you're starting fresh add the docker containers you want to use or prefer.
Unraid makes it actually pretty clear what's the Host Path and what's the Container Path.
`Container Path:` => The path that will be used inside the container.
`Host Path:` => The path on your Unraid Server (The Host).
##### Torrent clients
qBittorrent, Deluge, ruTorrent
`Container Path:` => `/data/torrents`
`Host Path`: => `/mnt/user/data/torrents`
!!! info
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
##### Usenet clients
NZBGet or SABnzbd
`Container Path:` => `/data/usenet`
`Host Path:` => `/mnt/user/data/usenet`
!!! info
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
##### The arr(s)
Sonarr, Radarr and Lidarr
`Container Path:` => `/data`
`Host Path:` => `/mnt/user/data/`
!!! info
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
##### Media Server
Plex, Emby, JellyFin and Bazarr
`Container Path:` => `/data/media`
`Host Path:` => `/mnt/user/data/media/`
!!! info
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
##### Final Result
[](https://raw.githubusercontent.com/TRaSH-/Guides/master/docs/Misc/images/unraid-final-result.png){:target="_blank"}
Don't forget to look at the [Examples](#examples) how to setup the paths inside the containers.
??? summary "Synology"
#### Synology
!!! note
Being I don't have a Synology myself and I kind of hate the Synology GUI for the dockers, I'm doing this with the use of docker-compose.
This works like 10x faster then the GUI and after adding it shows up in the GUI.
Thnx to faxity for the initial compose that I used to create the Synology Guide.
We need to get some information that we need later to setup the docker-compose file.
##### PUID and PGID
In order for the Docker container to access the shares on the Synology,
we need to give it the same permissions as your main user who has access to those shares.
For this we need to figure out the PUID and the PGID of the user having access to your shares.
You will need to SSH into your Synology.
If you didn't already enable it you need to do that first
[](https://raw.githubusercontent.com/TRaSH-/Guides/master/docs/Misc/images/synology-control-panel.png){:target="_blank"}
Then use a program like Putty and SSH to your Synology.
Login if you get a popup asking if you want to trust the key,
Just press `OK` or `ACCEPT`
Enter the login information of your main Synology user account.
Once logged in type `id`.
This will show your UID (aka PUID).
Which in this screenshot is `1026` for the administrator
and the GID (aka PGID) which is `100` for the users group.
Remember these values for later use.
!!! note
Yes we know it's not recommended to use the admin account but if you already know this then you wouldn't need to read this ;)
!!! attention
To get Hardlinks and Atomic-Moves working with your Synology you will need to make use of **ONE** share with subfolders.
##### Folder Structure
For this example we're going to make use of a share called `data`.
On the host (Synology) you will need to add `/volume1/` before it. So `/volume1/data`
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
These subfolders you need to create your self.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
*I'm using lower case on all folder on purpose, being Linux is case sensitive.*
##### Appdata
Your appdata will be stored in `/volume1/docker/appdata/{appname}`
These `{appname}` sub folders you need to create your self. (*This is a limitation of the Synology*)
```bash
sudo mkdir /docker/appdata
cd /docker/appdata
sudo mkdir radarr sonarr bazarr nzbget qbittorrent plex tautulli
```
So your appdata folder will look like this.
```none
docker
└── appdata
├── radarr
├── sonarr
├── bazarr
├── nzbget
├── qbittorrent
├── plex
└── tautulli
```
A docker-compose file exist of 1 file that holds all the needed info of all your docker containers.
this makes it easy to maintain and compare paths.
Download this [docker-compose.yml](https://gist.github.com/TRaSH-/6eddbc251b54b22acffba6baf5cbb5ed){:target="_blank"} to your `/volume1/docker/appdata` location so you got your important stuff together.
```bash
sudo wget https://gist.githubusercontent.com/TRaSH-/6eddbc251b54b22acffba6baf5cbb5ed/raw/ca91114e74d5669ed3ede8a379f510acc54865ad/docker-compose.yml
```
This docker-compose file will have the following docker containers included.
- Radarr
- Sonarr
- Bazarr (Subtitle searcher and downloaded)
- NZBGet
- qBittorent
- Plex
- Tautulli
- Watchtower (automatic docker container updater)
##### Changes you need to do
1. PUID/PGID (this info you got earlier)
1. TZ (Change to your timezone)
##### Permissions
```bash
sudo chown -R $USER:users /volume1/data /volume1/docker
sudo chmod -R a=,a+rX,u+w,g+w /volume1/data /volume1/docker
```
!!! important
make sure you deleted/removed all your existing dockers from the GUI and also remove your native installs of these applications !!!
##### Run the Docker Compose
When you did all the above steps you only need to type the following in your `/volume1/docker/appdata`
```bash
cd /volume1/docker/appdata
sudo docker-compose up -d
```
You will notice that all the images will be downloaded, and after that the containers will be started. If you get a error then look at the error what it says and try to fix it. If you still got issues then put your used docker-compose.yml on pastebin and join the guides-discord [here](https://trash-guides.info/discord){:target="_blank"} and provide the pastebin link with the error, have patience because of timezone differences.
Don't forget to look at the [Examples](#examples) how to setup the paths inside the containers.
!!! attention
If you need to do any changes only edit the `docker-compose.yml` file and activate the changes when you type `sudo docker-compose up -d` again.
Any changes you do/did in the GUI will be reverted when you run the docker-compose.
Just don't use the GUI
!!! tip
I've created a collection of often used applications that you can use to add/replace in the current `docker-compose.yml`
[synology-docker-compose-collection](https://gist.github.com/TRaSH-/1648a937f9c1c7b45e0f379142694892){:target="_blank"}
??? summary "Docker"
#### Docker
!!! note
I'm not going to explain how to get dockers installed and running, I will only explain which folder structure we recommend you to uses and also provide a docker-compose.
*I do recommend to use a non-root user with sudo permissions.*
!!! attention
It doesn't really matter which path you use for your media and appdata,
the only thing you should avoid is `/home`.
Because user folders in `/home` are expected to have some restrictive permissions.
It just could end up creating a permissions mess, so it's better to just avoid entirely.
##### Folder Structure
For this example we're going to make use of a share called `data`.
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
??? summary "Breakdown of the Folder Structure"
##### Breakdown of the Folder Structure
###### Torrent clients
qBittorrent, Deluge, ruTorrent
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/torrents/movies /data/torrents/tv /data/torrents/music
```
###### Usenet clients
NZBGet or SABnzbd
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/usenet/movies /data/usenet/tv /data/usenet/music
```
###### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/media/movies /data/media/tv /data/media/music
```
###### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
*I'm using lower case on all folder on purpose, being Linux is case sensitive.*
##### Appdata
Your appdata will be stored in `/docker/appdata/{appname}`
```bash
sudo mkdir -p /docker/appdata
```
##### Permissions
```bash
sudo chown -R $USER:$USER /data /docker
sudo chmod -R a=,a+rX,u+w,g+w /data /docker
```
A docker-compose file exist of 1 file that holds all the needed info of all your docker containers.
this makes it easy to maintain and compare paths.
Download this [docker-compose.yml](https://gist.github.com/TRaSH-/73a2250c2645dfe1c97c61bb5fc46d59){:target="_blank"} to your `/docker/` location so you got your important stuff together.
CD to your `/docker` folder and use the following command to download it.
```bash
wget https://gist.githubusercontent.com/TRaSH-/73a2250c2645dfe1c97c61bb5fc46d59/raw/b5010e038709f6cc39bba08732581bc437256971/docker-compose.yml
```
This docker-compose file will have the following docker containers included.
- Radarr
- Sonarr
- Bazarr (Subtitle searcher and downloaded)
- NZBGet
- qBittorent
- Plex
- Tautulli
- Watchtower (automatic docker container updater)
##### Changes you need to do
1. Change the PUID/PGID.
1. TZ (Change to your timezone)
##### Run the Docker Compose
```bash
sudo docker-compose up -d
```
You will notice that all the images will be downloaded, and after that the containers will be started. If you get a error then look at the error what it says and try to fix it. If you still got issues then put your used docker-compose.yml on pastebin and join the guides-discord [here](https://trash-guides.info/discord){:target="_blank"} and provide the pastebin link with the error, have patience because of timezone differences.
Don't forget to look at the [Examples](#examples) how to setup the paths inside the containers.
!!! tip
I've created a collection of often used applications that you can use to add/replace in the current `docker-compose.yml`
[docker-compose-collection](https://gist.github.com/TRaSH-/68cd26deb5e6269e5eb8114f93b429ab){:target="_blank"}
??? summary "Bare Metal (Native)"
#### Native
!!! attention
It doesn't really matter which path you use for your media,
the only thing you should avoid is `/home`.
Because user folders in `/home` are expected to have some restrictive permissions.
It just could end up creating a permissions mess, so it's better to just avoid entirely.
##### Folder Structure
For this example we're going to make use of a share called `data`.
The `data` folder has sub-folders for `torrents` and `usenet` and each of these have sub-folders for `tv`, `movie` and `music` downloads to keep things neat. The `media` folder has nicely named `TV`, `Movies` and `Music` sub-folders, this is your library and what you’d pass to Plex, Emby or JellyFin.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
??? summary "Breakdown of the Folder Structure"
##### Breakdown of the Folder Structure
###### Torrent clients
qBittorrent, Deluge, ruTorrent
The reason why we use `/data/torrents` for the torrent client is because it only needs access to the torrent files. In the torrent software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/torrents/{tv|movies|music}`.
```none
data
└── torrents
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/torrents/movies /data/torrents/tv /data/torrents/music
```
###### Usenet clients
NZBGet or SABnzbd
The reason why we use `/data/usenet` for the usenet client is because it only needs access to the usenet files. In the usenet software settings, you’ll need to reconfigure paths and you can sort into sub-folders like `/data/usenet/{tv|movies|music}`.
```none
data
└── usenet
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/usenet/movies /data/usenet/tv /data/usenet/music
```
###### The arr(s)
Sonarr, Radarr and Lidarr
Sonarr, Radarr and Lidarr gets access to everything because the download folder(s) and media folder will look like and be one file system. Hard links will work and moves will be atomic, instead of copy + delete.
```none
data
├── torrents
│ ├── movies
│ ├── music
│ └── tv
├── usenet
│ ├── movies
│ ├── music
│ └── tv
└── media
├── movies
├── music
└── tv
```
```bash
sudo mkdir -p /data/media/movies /data/media/tv /data/media/music
```
###### Media Server
Plex, Emby, JellyFin and Bazarr
Plex, Emby, JellyFin and Bazarr only needs access to your media library, which can have any number of sub folders like Movies, Kids Movies, TV, Documentary TV and/or Music as sub folders.
```none
data
└── media
├── movies
├── music
└── tv
```
*I'm using lower case on all folder on purpose, being Linux is case sensitive.*
##### Permissions
```bash
sudo chown -R $USER:$USER /data
sudo chmod -R a=,a+rX,u+w,g+w /data
```
Don't forget to look at the [Examples](#examples) how to setup the paths inside the containers.
Examples
!!! info
Pick one path layout and use it for all of them.
It doesn't matter if you prefer to use `/data`, `/shared`, `/storage` or whatever.
The screenshots in the examples are using the following root path `/data`
??? example "Sonarr Examples"
#### Sonarr
`Settings` => `Media Management` => `Importing`
`Settings` => `Media Management` => `Root Folders`
`Series` => `Add New`
??? example "Radarr Examples"
#### Radarr
`Settings` => `Media Management` => `Importing`
`Settings` => `Media Management` => `Root Folders`
`Movies` => `Add New`
??? example "SABnzbd Examples"
#### SABnzbd
`SABnzbd config` => `Folders`
`SABnzbd config` => `Categories`
??? example "NZBGet Examples"
#### NZBGet
`Settings` => `PATHS`
`Settings` => `CATEGORIES`
??? example "qBittorrent Examples"
#### qBittorrent
`Options` => `Downloads`
??? example "Deluge Example"
#### Deluge
`Preferences` => `Downloads`
??? example "ruTorrent Examples"
#### ruTorrent
`../config/rtorrent/config/rtorrent.rc` (path to your appdata)
`Settings` => `Downloads`
`Settings` => `Autotools`
Big Thnx to fryfrog{:target="_blank"} for his Docker Guide{:target="_blank"} that I used as basis for this guide.