- **AI-BASED SERVER MODERATION** - GPT3Discord now has a built-in AI-based moderation system that can automatically detect and remove toxic messages from your server. This is a great way to keep your server safe and clean, and it's completely automatic and **free**! Check out the commands section to learn how to enable it!
- **AUTOMATIC CHAT SUMMARIZATION!** - When the context limit of a conversation is reached, the bot will use GPT3 itself to summarize the conversation to reduce the tokens, and continue conversing with you, this allows you to chat for a long time!
- Custom conversation openers from https://github.com/f/awesome-chatgpt-prompts were integrated into the bot, check out `/gpt converse opener_file`! The bot now has built in support to make GPT3 behave like various personalities, such as a life coach, python interpreter, interviewer, text based adventure game, and much more!
- **DALL-E Image Generation** - Generate DALL-E AI images right in discord with `/dalle draw <prompt>`! It even supports multiple image qualities, multiple images, creating image variants, retrying, and saving images.
- **DALL-E Image Prompt Optimization** - Given some text that you're trying to generate an image for, the bot will automatically optimize the text to be more DALL-E friendly! `/dalle optimize <prompt>`
- **Redo Requests** - A simple button after the GPT3 response or DALL-E generation allows you to redo the initial prompt you asked. You can also redo conversation messages by just editing your message!
- Change and view model parameters such as temp, top_p, and etc directly within discord.
- Tracks token usage automatically
- Automatic pagination and discord support, the bot will automatically send very long message as multiple messages, and is able to send discord code blocks and emoji, gifs, etc.
- A low usage mode, use a command to automatically switch to a cheaper and faster model to conserve your tokens during times of peak usage.
- Prints debug to a channel of your choice, so you can view the raw response JSON
- Ability to specify a limit to how long a conversation can be with the bot, to conserve your tokens.
These commands are grouped, so each group has a prefix but you can easily tab complete the command without the prefix. For example, for `/gpt ask`, if you type `/ask` and press tab, it'll show up too.
`/gpt converse opener:<opener text>` - Start a conversation with the bot, with a custom opener text (this is useful if you want it to take on a custom personality from the start).
`/gpt converse opener_file:<opener file name>.txt` - Starts a conversation with the bot, using a custom file, using this option also enables the minimal conversation starter. Loads files from the `/openers` folder, has autocomplete support so files in the folder will show up. Added before the `opener` as both can be used at the same time
`/system settings <setting> <value>` - Change a model setting to a new value. Has autocomplete support, certain settings will have autocompleted values too.
`/system usage` Estimate current usage details (based on davinci)
`/system settings low_usage_mode True/False` Turn low usage mode on and off. If on, it will use the curie-001 model, and if off, it will use the davinci-003 model.
`/system delete-conversation-threads` - Delete all threads related to this bot across all servers.
`/system local-size` - Get the size of the local dalleimages folder
`/system clear-local` - Clear all the local dalleimages.
`/system moderations status:on` - Turn on automatic chat moderations.
`/system moderations status:off` - Turn off automatic chat moderations
`/system moderations status:off alert_channel_id:<CHANNEL ID>` - Turn on moderations and set the alert channel to the channel ID you specify in the command.
- The bot needs Administrative permissions for this, and you need to set `MODERATIONS_ALERT_CHANNEL` to the channel ID of a desired channel in your .env file if you want to receive alerts about moderated messages.
- This uses the OpenAI Moderations endpoint to check for messages, requests are only sent to the moderations endpoint at a MINIMUM request gap of 0.5 seconds, to ensure you don't get blocked and to ensure reliability.
- The bot uses numerical thresholds to determine whether a message is toxic or not, and I have manually tested and fine tuned these thresholds to a point that I think is good, please open an issue if you have any suggestions for the thresholds!
All the model parameters are configurable inside discord. Type `/system settings` to view all the configurable parameters, and use `/system settings <param> <value>` to set parameters.
For example, if I wanted to change the number of images generated by DALL-E by default to 4, I can type the following command in discord: `/system settings num_images 4`
You can learn how to add the discord bot to your server via https://www.ionos.co.uk/digitalguide/server/know-how/creating-discord-bot/
Both the OpenAI API key and the Discord bot token needed to be loaded into a .env file in the same local directory as the bot file.
You also need to add a DEBUG_GUILD id and a DEBUG_CHANNEL id, the debug guild id is a server id, and the debug channel id is a text-channel id in Discord. Your final .env file should look like the following:
You also need to add the allowed guilds that the bot can operate on, this is the `ALLOWED_GUILDS` field, to get a guild ID, right click a server and click "Copy ID".
You also need to add the roles that can use the bots various features, scroll down a bit to "Permissions", and check out the sample environment file below.
WELCOME_MESSAGE="Hi There! Welcome to our Discord server. We hope you'll enjoy our server and we look forward to engaging with you!" # This is a fallback message if gpt3 fails to generate a welcome message.
As mentioned in the comments of the sample environment file, there are three permission groups that you can edit in the environment (`.env`) file. `ADMIN_ROLES` are roles that allow users to use `/system` commands. `GPT_ROLES` are roles that allow users to use `/gpt` commands, and `DALLE_ROLES` are roles that allow users to use `/dalle` commands.
Optionally, you can include your own conversation starter text for the bot that's used with `/gpt converse`, with `CONVERSATION_STARTER_TEXT`
If for a command group you want everybody to be able to use those commands, just don't include the relevant line in the `.env` file. For example, if you want everyone to be able to use GPT3 commands, you can just omit `the GPT_ROLES="...."` line.
First, you want to get a server, for this guide, I will be using DigitalOcean as the host.
For instructions on how to get a server from start to finish, they are available on DigitalOcean's website directly from the community, available here: https://www.digitalocean.com/community/tutorials/how-to-set-up-an-ubuntu-20-04-server-on-a-digitalocean-droplet. Ignore the part about setting up an "ssh key", and just use a password instead.
After you set up the server, the DigitalOcean GUI will give you an IP address, copy this IP address. Afterwards, you will need to SSH into the server. This can be done using a program such as "PuTTy", or by using your commandline, if it's supported. To login to the server, your username will be "root", your password will be the password that you defined earlier when setting up the droplet, and the IP address will be the IP address you copied after the droplet was finished creation.
To connect with ssh, run the following command in terminal:
`ssh root@{IP ADDRESS}`
It will then prompt you for your password, which you should enter, and then you will be logged in.
After login, we need to install the various dependencies that the bot needs. To do this, we will run the following commands:
# Copy the sample.env file into a regular .env file. `DEBUG_GUILD` and the ID for `ALLOWED_GUILDS` can be found by right-clicking your server and choosing "Copy ID". Similarly, `DEBUG_CHANNEL` can be found by right-clicking your debug channel.
- Make sure you have updated your .env file with valid values for `DEBUG_GUILD`, `DEBUG_CHANNEL` and `ALLOWED_GUILDS`, otherwise the bot will not work. Guild IDs can be found by right clicking a server and clicking `Copy ID`, similarly, channel IDs can be found by right clicking a channel and clicking `Copy ID`.
