3.6 KiB

Raw Blame History

RandomNinjaAtk/radarr-extended

Radarr - A fork of Sonarr to work with movies à la Couchpotato.

This containers base image is provided by: linuxserver/radarr

Supported Architectures

The architectures supported by this image are:

Architecture	Available	Tag
multi	✅	latest
x86-64	✅	amd64
arm64v8	✅	arm64v8
arm32v7	✅	arm32v7

Version Tags

Tag	Description
develop	Radarr (develop) + SMA + ffmpeg

Parameters

Container images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate <external>:<internal> respectively. For example, -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080 outside the container.

Parameter	Function
`-p 7878`	The port for the Radarr webinterface
`-v /config`	Database and Radarr configs
`-e PUID=1000`	for UserID - see below for explanation
`-e PGID=1000`	for GroupID - see below for explanation
`-e TZ=America/New_York`	Specify a timezone to use EG Europe/London, this is required for Radarr
`-e UMASK_SET=022`	control permissions of files and directories created by Radarr
`-e enableAutoConfig=true`	true = enabled :: Enables AutoConfig script to run after startup
`-e enableRecyclarr=true`	true = enabled :: Enables Recyclarr to run every 4 hours
`-e enableQueueCleaner=true`	true = enabled :: Enables QueueCleaner Script that automatically removes stuck downloads that cannot be automatically imported on a 15 minute interval
`-e plexUrl=http://x.x.x.x:32400`	ONLY used if PlexNotify.bash is used...
`-e plexToken=`	ONLY used if PlexNotify.bash is used...

Application Setup

Access the webui at <your-ip>:7878, for more information check out Radarr.

Radarr Configuration

Enable completed download handling

Settings -> Download Client -> Completed Download Handling -> Enable: Yes

Add Custom Script

Settings -> Connect -> + Add -> custom Script

Parameter	Value
On Grab	No
On Import	Yes
On Upgrade	Yes
On Rename	No
On Health Issue	No
Tags	leave blank
Path	`/scripts/postRadarr.sh`

SMA Information:

Config Information

Located at /config/sma/autoProcess.ini inside the container

Log Information

Located at /config/sma/sma.log inside the container

Hardware Acceleration

Set "video codec" to: h264vaapi or h265vaapi in "/config/sma/autoProcess.ini"
Make sure you have passed the correct device to the container, or these will not work...

3.6 KiB Raw Blame History