docs(wiki): Reword names/trash_ids properties for Radarr

The previous wording explained that `names` was preferred over
`trash_ids`, however that is no longer the case.

wiki/Configuration-Reference.md

@@ -215,14 +215,13 @@ Synchronization]] page.
   custom formats to. The child properties documented below apply to each element of this list.
 
   > **Note:** Even though `names` and `trash_ids` below are marked *optional*, at least one of them
-  > is required. For example, if `names` is empty you must use `trash_ids` and vice versa.
+  > is required. For example, if `names` is empty you must use `trash_ids` and vice versa. You can
+  > also use both together if you want.
   >
-  > When would you use `names` or `trash_ids`? Rule of thumb: Stick to `names`. It's more user
-  > friendly than IDs, because you can look at a name and know what custom format it is referring
-  > to. The IDs are there for certain corner cases (you can read more about those in the relevant
-  > bullet point below).
+  > **Advice:** When would you use `names` or `trash_ids`? Rule of thumb: Stick to `trash_ids`. It's
+  > more robust and immune to breaking than using names. Names can change, Trash IDs never change.
 
-  - `names` (Optional; *Default: `trash_ids` is required*)<br>
+  - `names` (Optional; *`trash_ids` is required if not used*)<br>
     A list of one or more custom format names to synchronize to Radarr. The names *must* be taken
     from the JSON itself in the guide, for example:
 
@@ -241,15 +240,7 @@ Synchronization]] page.
       - TrueHD ATMOS
     ```
 
-    > **A Few Things to Remember**
-    >
-    > - If `delete_old_custom_formats` is set to true, custom formats are **deleted** in Radarr if
-    >   you remove them from this list.
-    > - It's OK for the same custom format to exist in multiple lists of `names`. Recyclarr will
-    >   only ever synchronize it once. Allowing it to be specified multiple times allows you to
-    >   assign it to different profiles with different scores.
-
-  - `trash_ids` (Optional; *Default: `names` is required*)<br>
+  - `trash_ids` (Optional; *`names` is required if not used*)<br>
     A list of one or more Trash IDs of custom formats to synchronize to Radarr. The IDs *must* be
     taken from the value of the `"trash_id"` property in the JSON itself. It will look like the
     following:
@@ -260,23 +251,8 @@ Synchronization]] page.
     }
     ```
 
-    Normally you should be using `names` to specify which custom formats you want. There are a few
-    rare cases where you might prefer (or need) to use the ID instead:
-
-    - Sometimes there are custom formats in the guide with the same name, such as "DoVi". In this
-      case, Recyclarr will issue you a warning instructing you to use the Trash ID instead of the
-      name to resolve the ambiguity.
-    - Trash IDs never change. Custom format names can change. Recyclarr keeps an internal cache of
-      every custom format its seen to reduce the need for your config names to be updated. But it's
-      not 100% fool proof. Using the ID could mean less config maintenance for you in the long run
-      at the expense of readability.
-
-    Most of the rules and semantics are identical to the `names` property, which is documented
-    above. Just apply that logic to the ID instead of the name.
-
-    Lastly, as a tip, to ease the readability concerns of using IDs instead of names, leave a
-    comment beside the Trash ID in your configuration so it can be easily identified later. For
-    example:
+    **TIP:** To ease the readability concerns of using IDs instead of names, leave a comment beside
+    the Trash ID in your configuration so it can be easily identified later. For example:
 
     ```yml
     trash_ids:
@@ -284,6 +260,14 @@ Synchronization]] page.
       - a570d4a0e56a2874b64e5bfa55202a1b # flac
     ```
 
+    > **A Few Things to Remember**
+    >
+    > - If `delete_old_custom_formats` is set to true, custom formats are **deleted** in Radarr if
+    >   you remove them from this list.
+    > - It's OK for the same custom format to exist in multiple lists of `names`. Recyclarr will
+    >   only ever synchronize it once. Allowing it to be specified multiple times allows you to
+    >   assign it to different profiles with different scores.
+
   - `quality_profiles` (Optional; *Default: No quality profiles are changed*)<br>
     One or more quality profiles to update with the scores from the custom formats listed above.
     Scores are taken from the guide by default, with an option to override the score for all of