You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
134 lines
3.2 KiB
134 lines
3.2 KiB
# Install collector on Synology
|
|
|
|
## Install Entware
|
|
|
|
This will allow you to install a newer version of smartmontools on your Synology. Follow the instructions here (This is tested on DSM7) - https://github.com/Entware/Entware/wiki/Install-on-Synology-NAS
|
|
|
|
**PLEASE NOTE THAT IF YOU UPDATE DSM FIRMWARE YOU MAY BORK THE EXISTING ENTWARE INSTALLATION, FOR ANYTHING THAT MAY RELATE TO ENTWARE PLEASE VISIT THEIR REPO**
|
|
|
|
## Collector Setup
|
|
|
|
**1. Run an update**
|
|
|
|
`sudo opkg update`
|
|
|
|
**2. Run an upgrade**
|
|
|
|
`sudo opkg upgrade`
|
|
|
|
**3. Install smartmontools**
|
|
|
|
`sudo opkg install smartmontools`
|
|
|
|
*It should install v7.2-2*
|
|
|
|
`Installing smartmontools (7.2-2) to root...`
|
|
|
|
**4. We will now create the directories.**
|
|
|
|
```
|
|
mkdir -p /volume1/\@Entware/scrutiny/bin
|
|
mkdir -p /volume1/\@Entware/scrutiny/conf
|
|
```
|
|
|
|
**5. change into the bin directory**
|
|
|
|
`cd /volume1/\@Entware/scrutiny/bin`
|
|
|
|
**6. Download the collector binary for your architecture and make it executable**
|
|
|
|
`wget https://github.com/AnalogJ/scrutiny/releases/download/v0.4.12/scrutiny-collector-metrics-linux-arm64`
|
|
|
|
`chmod +x /volume1/\@Entware/scrutiny/bin/scrutiny-collector-metrics-linux-arm64`
|
|
|
|
**7. Create a config file for the collector**
|
|
|
|
```
|
|
cd /volume1/\@Entware/scrutiny/conf
|
|
wget https://raw.githubusercontent.com/AnalogJ/scrutiny/master/example.collector.yaml
|
|
mv example.collector.yaml collector.yaml
|
|
```
|
|
|
|
**8. Lets make some changes in the [collector config file](../example.collector.yaml), these are what i uncommented/added, please tweak the device paths to your needs**
|
|
|
|
```
|
|
host:
|
|
id: 'Server_Name'
|
|
|
|
|
|
devices:
|
|
# # example for forcing device type detection for a single disk
|
|
- device: /dev/sda
|
|
type: 'sat'
|
|
- device: /dev/sdb
|
|
type: 'sat'
|
|
- device: /dev/sdc
|
|
type: 'sat'
|
|
- device: /dev/sdd
|
|
type: 'sat'
|
|
|
|
api:
|
|
endpoint: 'http://<url>:8080'
|
|
```
|
|
|
|
**9. Let's update the smartd db**
|
|
|
|
```
|
|
cd /volume1/\@Entware/scrutiny/bin/
|
|
wget https://raw.githubusercontent.com/smartmontools/smartmontools/master/smartmontools/drivedb.h
|
|
```
|
|
|
|
**10. I ran it like this but you can tweak to your liking, the most important part is the --drivedb, as this loads it into the aplication for future use**
|
|
|
|
`smartctl -d sat --all /dev/sda --drivedb=/volume1/\@Entware/scrutiny/bin/drivedb.h`
|
|
|
|
**11. Now lets create a small bash script, this will be used for the scheduled task inside Synology**
|
|
|
|
`vim /volume1/\@Entware/scrutiny/bin/run_collect.sh`
|
|
|
|
**The contents are below, copy and paste them in**
|
|
|
|
```
|
|
#!/bin/bash
|
|
|
|
/volume1/\@Entware/scrutiny/bin/scrutiny-collector-metrics-linux-arm64 run --config /volume1/\@Entware/scrutiny/config/collector.yaml
|
|
```
|
|
|
|
## Set up Synology to run a scheduled task.
|
|
|
|
Log in to DSM and do the following:
|
|
|
|
Goto: DSM > Control Panel > Task Scheduler
|
|
|
|
Create > Scheduled Task > User Defined Script
|
|
|
|
###### General
|
|
|
|
```
|
|
Task: Scrutiny_Collector
|
|
User: root
|
|
Enabled: yes
|
|
```
|
|
|
|
###### Schedule
|
|
```
|
|
Run on the following days: Daily
|
|
```
|
|
###### Time:
|
|
|
|
```
|
|
Frequency: <Your desired frequency>
|
|
```
|
|
|
|
###### Task Settings
|
|
|
|
**Run Command**
|
|
|
|
```
|
|
. /opt/etc/profile; /volume1/\@Entware/scrutiny/bin/run_collect.sh
|
|
```
|
|
|
|
|
|
## Troubleshooting
|
|
|
|
If you have any issues with your devices being detected, or incorrect data, please take a look at [TROUBLESHOOTING_DEVICE_COLLECTOR.md](./TROUBLESHOOTING_DEVICE_COLLECTOR.md) |